[PATCH v2 7/7] arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB

[Dang Huynh]

Enable and configure DWC3 and QUSB2 PHY to enable USB
functionality on the Redmi Note 7.

Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
---
 .../boot/dts/qcom/sdm660-xiaomi-lavender.dts  | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 122b487f197b..a34812e91160 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -82,6 +82,15 @@ framebuffer_mem: memory@9d400000 {
 			no-map;
 		};
 	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &blsp1_uart2 {
@@ -98,6 +107,13 @@ voldown {
 	};
 };
 
+&qusb2phy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
 &rpm_requests {
 	pm660l-regulators {
 		compatible = "qcom,rpm-pm660l-regulators";
@@ -403,3 +419,12 @@ &sdhc_2 {
 &tlmm {
 	gpio-reserved-ranges = <8 4>;
 };
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
-- 
2.33.1