Re: [PATCH 1/2] rtc-rv8803: fix writing back ctrl in flag register

[Alexandre Belloni]

On 08/11/2021 12:16:59+0900, Dominique Martinet wrote:
> Hi Alexandre, Alessandro,
> 
> the other patch was proved to be unneeded, but this one is still a valid
> fix as far as I can understand the code (reusing RV8803_CTRL value to
> write into RV8803_FLAG does not look correct)
> 
> (I'm also convinced either mostly work because the original values are
> usually close enough, but that's not a reason to keep using the wrong
> one)
> 
> 
> Would you have time to take a look?

I did check with the initial review and I'm going to apply it, I just
didn't have the time to do that yet.

> 
> 
> Thanks!
> 
> Dominique Martinet wrote on Mon, Nov 01, 2021 at 10:33:59AM +0900:
> > ctrl is set from read_regs(..FLAG, 2, ctrl), so ctrl[0] is FLAG
> > and ctrl[1] is the CTRL register.
> > Use ctrl[0] to write back to the FLAG register as appropriate.
> > 
> > Signed-off-by: Dominique Martinet <dominique.martinet@xxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/rtc/rtc-rv8803.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
> > index 72adef5a5ebe..0d5ed38bf60c 100644
> > --- a/drivers/rtc/rtc-rv8803.c
> > +++ b/drivers/rtc/rtc-rv8803.c
> > @@ -340,8 +340,8 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> >  		}
> >  	}
> >  
> > -	ctrl[1] &= ~RV8803_FLAG_AF;
> > -	err = rv8803_write_reg(rv8803->client, RV8803_FLAG, ctrl[1]);
> > +	ctrl[0] &= ~RV8803_FLAG_AF;
> > +	err = rv8803_write_reg(rv8803->client, RV8803_FLAG, ctrl[0]);
> >  	mutex_unlock(&rv8803->flags_lock);
> >  	if (err)
> >  		return err;

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com