Re: kernel 5.15 does not boot with 3ware card (never had this issue <= 5.14) - scsi 0:0:0:0: WARNING: (0x06:0x002C) : Command (0x12) timed out, resetting card

[Douglas Miller]

The commit I referenced earlier does point back to the commit that 
caused the problem (that I saw). There was a series of commits related 
to IRQ domains, this one seems to have actually caused the problem I saw:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a5f3d2c17b07


On 11/7/21 07:46, Justin Piszcz wrote:
> On Sat, Nov 6, 2021 at 7:54 AM Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx> wrote:
> > -----Original Message-----
> > From: Bart Van Assche <bvanassche@xxxxxxx>
> > Sent: Wednesday, November 3, 2021 12:23 PM
> > To: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>; Douglas Miller <dougmill@xxxxxxxxxxxxxxxxxx>
> > Cc: LKML <linux-kernel@xxxxxxxxxxxxxxx>; linux-scsi@xxxxxxxxxxxxxxx
> > Subject: Re: kernel 5.15 does not boot with 3ware card (never had this issue <= 5.14) - scsi 0:0:0:0: WARNING: (0x06:0x002C) : Command (0x12) timed out, resetting card
> >
> > On 11/3/21 9:18 AM, Justin Piszcz wrote:
> > > Thanks!-- Has anyone else reading run into this issue and/or are there
> > > any suggestions how I can troubleshoot this further (as all -rc's have
> > > the same issue)?
> > How about bisecting this issue
> > (https://www.kernel.org/doc/html/latest/admin-guide/bug-bisect.html)?
> >
> > [ .. ]
> >
> > I was having some issues finding a list of changes with git bisect, so I started checking the kernel .config and boot parameters:
> >
> > I found the option that was causing the system not to boot (tested with 5.15.0 and latest linux-git as of 6 NOV 2021)
> > append="3w-sas.use_msi=1"
> >
> > 3w-sas.use_msi defaults to 0 (so now it is using IR-IO-APIC instead of MSI but now the machine boots using 5.15)
> > https://lwn.net/Articles/358679/
> >
> > Something between 5.14 and 5.15 changed regarding x86_64's handling of Message Signaled Interrupts.
> > ... which causes the kernel to no longer boot when 3w-sas.use_msi=1 is specified starting with 5.15.
> This only partially fixes the issues, trying to reboot also results in
> a hard lockup on cpu 1 (this is semi-reproducible)
> https://installkernel.tripod.com/5.15-reboot-lockup.jpg
>
> Back to 5.14.x for now...
>
>
>
> Justin.