Re: [PATCH 09/13] dt-bindings: gpio: add bindings for microchip mpfs gpio

[Krzysztof Kozlowski]

On 08/11/2021 16:05, conor.dooley@xxxxxxxxxxxxx wrote:
> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> 
> Add device tree bindings for the gpio controller on
> the Microchip PolarFire SoC.
> 
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
>  .../bindings/gpio/microchip,mpfs-gpio.yaml    | 108 ++++++++++++++++++
>  1 file changed, 108 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
> new file mode 100644
> index 000000000000..067019ddc1f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip MPFS GPIO Controller Device Tree Bindings
> +
> +maintainers:
> +  - Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> +
> +description: |
> +  This GPIO controller is found on the Microchip PolarFire SoC.

If "Microchip MPFS" means "Microchip PolarFire SoC", then this is
duplicating the title. Similarly to your previous patches. Skip it then,
there is no point to have descriptions which are obvious or duplicating
existing information.

> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - microchip,mpfs-gpio
> +          - microsemi,ms-pf-mss-gpio
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description:
> +      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
> +    minItems: 1
> +    maxItems: 32
> +
> +  interrupt-controller: true
> +
> +  clocks:
> +    maxItems: 1
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  ngpios:
> +    description:
> +      The number of GPIOs available.
> +    minimum: 1
> +    maximum: 32
> +    default: 32
> +
> +  gpio-controller: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#interrupt-cells"
> +  - "#gpio-cells"
> +  - gpio-controller
> +  - clocks
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include "dt-bindings/clock/microchip,mpfs-clock.h"
> +    #include "dt-bindings/interrupt-controller/microchip,mpfs-plic.h"
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +      gpio2: gpio@20122000 {
> +        compatible = "microchip,mpfs-gpio";
> +        reg = <0x0 0x20122000 0x0 0x1000>;
> +        clocks = <&clkcfg CLK_GPIO2>;
> +        interrupt-parent = <&plic>;
> +        interrupts = <PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT
> +          PLIC_INT_GPIO2_NON_DIRECT>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        status = "disabled";

Skip status=disabled.

> +      };
> +    };
> +...
> 


Best regards,
Krzysztof