Re: [PATCH v2 1/3] drm/bridge: parade-ps8640: Don't try to enable VDO if poweron fails

From: Dafna Hirschfeld
Date: Wed Nov 10 2021 - 07:42:39 EST




On 02.11.21 11:36, AngeloGioacchino Del Regno wrote:
If the bridge cannot get powered on, there's no reason to try to
communicate with it: change the ps8640_bridge_poweron function to
return an error value to the caller, so that we can avoid calling
ps8640_bridge_vdo_control() in ps8640_pre_enable() if the poweron
sequence fails.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>

---
drivers/gpu/drm/bridge/parade-ps8640.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index 4b36e4dc78f1..8c5402947b3c 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -293,19 +293,19 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge,
return 0;
}
-static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
+static int ps8640_bridge_poweron(struct ps8640 *ps_bridge)
{
struct regmap *map = ps_bridge->regmap[PAGE2_TOP_CNTL];
int ret, status;
if (ps_bridge->powered)
- return;
+ return 0;
ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies),
ps_bridge->supplies);
if (ret < 0) {
DRM_ERROR("cannot enable regulators %d\n", ret);
- return;
+ return ret;
}
gpiod_set_value(ps_bridge->gpio_powerdown, 0);
@@ -352,11 +352,13 @@ static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
ps_bridge->powered = true;
- return;
+ return 0;
err_regulators_disable:
regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies),
ps_bridge->supplies);
+
+ return ret;
}
static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge)
@@ -381,7 +383,9 @@ static void ps8640_pre_enable(struct drm_bridge *bridge)
struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
int ret;
- ps8640_bridge_poweron(ps_bridge);
+ ret = ps8640_bridge_poweron(ps_bridge);
+ if (ret)
+ return;
ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE);
if (ret < 0)