Re: [PATCH v2 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5

[Andreas Kemnade]

On Wed, 10 Nov 2021 22:59:50 +1000
Alistair Francis <alistair23@xxxxxxxxx> wrote:

[...]
> >  
> > > +            reset-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;  
> >
> > hmm, if the reset gpio at the chip is active low (I guess it is) that
> > would indicate an inverter between SoC and gpio. So a nonstandard setup
> > as an example, probably not a good idea.  
> 
> It seems to be common for the cypress,tt2100, as the original
> documentation and the rM2 both do this. Does the Kobo not do this?
> 

You have a kind of double inversion here, so things are automagically fixed.
IMHO to describe it correctly would be to set GPIO_ACTIVE_LOW here
and in the driver

	/* Reset the gpio to be in a reset state */
	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
	if (IS_ERR(ts->reset_gpio)) {
		rc = PTR_ERR(ts->reset_gpio);
		dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
		return rc;
	}
	gpiod_set_value(ts->reset_gpio, 0);

That is the way how other active-low reset lines are handled.

Regards,
Andreas