[PATCH 5.14 05/24] usb: ehci: handshake CMD_RUN instead of STS_HALT

[Greg Kroah-Hartman]

From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>

commit 7f2d73788d9067fd4f677ac5f60ffd25945af7af upstream.

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Tested-by: Tao Ren <rentao.bupt@xxxxxxxxx>
Reviewed-by: Tao Ren <rentao.bupt@xxxxxxxxx>
Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@xxxxxxxxxxxxxx
Cc: Joel Stanley <joel@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/host/ehci-hcd.c      |   11 ++++++++++-
 drivers/usb/host/ehci-platform.c |    6 ++++++
 drivers/usb/host/ehci.h          |    1 +
 3 files changed, 17 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -634,7 +634,16 @@ static int ehci_run (struct usb_hcd *hcd
 	/* Wait until HC become operational */
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
-	rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000);
+
+	/* For Aspeed, STS_HALT also depends on ASS/PSS status.
+	 * Check CMD_RUN instead.
+	 */
+	if (ehci->is_aspeed)
+		rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN,
+				    1, 100 * 1000);
+	else
+		rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT,
+				    0, 100 * 1000);
 
 	up_write(&ehci_cf_port_reset_rwsem);
 
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -297,6 +297,12 @@ static int ehci_platform_probe(struct pl
 					  "has-transaction-translator"))
 			hcd->has_tt = 1;
 
+		if (of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2500-ehci") ||
+		    of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2600-ehci"))
+			ehci->is_aspeed = 1;
+
 		if (soc_device_match(quirk_poll_match))
 			priv->quirk_poll = true;
 
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -219,6 +219,7 @@ struct ehci_hcd {			/* one per controlle
 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
 	unsigned		spurious_oc:1;
+	unsigned		is_aspeed:1;
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)