[RESEND PATCH v2 07/11] spmi: pmic-arb: clear unexpected interrupt trigger type

[Fenglin Wu]

From: Yimin Peng <yiminp@xxxxxxxxxxxxxx>

Have the qpnpint_irq_set_type function clear unwanted high/low
trigger bits when updating the interrupt flags. This fixes issues
when the IRQ type needs to be updated at runtime by calling
irq_set_irq_type() with different trigger types.

Fixes: 67b563f1f258 ("spmi: pmic_arb: add support for interrupt handling")
Signed-off-by: Yimin Peng <yiminp@xxxxxxxxxxxxxx>
Signed-off-by: Subbaraman Narayanamurthy <subbaram@xxxxxxxxxxxxxx>
Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
---
 drivers/spmi/spmi-pmic-arb.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index e83342a..93e14b4 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -643,8 +643,12 @@ static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type)
 		type.type |= BIT(irq);
 		if (flow_type & IRQF_TRIGGER_RISING)
 			type.polarity_high |= BIT(irq);
+		else
+			type.polarity_high &= ~BIT(irq);
 		if (flow_type & IRQF_TRIGGER_FALLING)
 			type.polarity_low  |= BIT(irq);
+		else
+			type.polarity_low  &= ~BIT(irq);
 
 		flow_handler = handle_edge_irq;
 	} else {
@@ -653,10 +657,13 @@ static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type)
 			return -EINVAL;
 
 		type.type &= ~BIT(irq); /* level trig */
-		if (flow_type & IRQF_TRIGGER_HIGH)
+		if (flow_type & IRQF_TRIGGER_HIGH) {
 			type.polarity_high |= BIT(irq);
-		else
+			type.polarity_low  &= ~BIT(irq);
+		} else {
 			type.polarity_low  |= BIT(irq);
+			type.polarity_high &= ~BIT(irq);
+		}
 
 		flow_handler = handle_level_irq;
 	}
-- 
2.7.4