[patch v6 02/10] add prctl task isolation prctl docs and samples
From: Marcelo Tosatti
Date: Fri Nov 12 2021 - 07:31:28 EST
The logic to disable vmstat worker thread, when entering
nohz full, does not cover all scenarios. For example, it is possible
for the following to happen:
References: <20211112121642.693790927@fedora.localdomain>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Add documentation and userspace sample code for prctl
task isolation interface.
Signed-off-by: Marcelo Tosatti <mtosatti@xxxxxxxxxx>
---
v6:
- Update docs and samples regarding oneshot mode (Frederic Weisbecker).
- Update docs and samples regarding more extensibility of
CFG_SET of ISOL_F_QUIESCE (Frederic Weisbecker).
v5:
- Fix documentation typos (Frederic Weisbecker).
- Fix oneshot example comment
v4:
- Switch to structures for parameters when possible
(which are more extensible).
- Switch to CFG_{S,G}ET naming and use drop
"internal configuration" prctls (Frederic Weisbecker).
- Add summary of terms to documentation (Frederic Weisbecker).
- Examples for compute and one-shot modes (Thomas G/Christoph L).
v3:
- Split in smaller patches (Nitesh Lal).
- Misc cleanups (Nitesh Lal).
- Clarify nohz_full is not a dependency (Nicolas Saenz).
- Incorrect values for prctl definitions (kernel robot).
- Save configured state, so applications
can activate externally configured
task isolation parameters.
- Remove "system default" notion (chisol should
make it obsolete).
- Update documentation: add new section with explanation
about configuration/activation and code example.
- Update samples.
v2:
- Finer-grained control of quiescing (Frederic Weisbecker / Nicolas Saenz).
- Avoid potential regressions by allowing applications
to use ISOL_F_QUIESCE_DEFMASK (whose default value
is configurable in /sys/). (Nitesh Lal / Nicolas Saenz).
Documentation/userspace-api/task_isolation.rst | 370 +++++++++++++++++++++++++
samples/Kconfig | 7
samples/Makefile | 1
samples/task_isolation/Makefile | 11
samples/task_isolation/task_isol.c | 92 ++++++
samples/task_isolation/task_isol.h | 9
samples/task_isolation/task_isol_computation.c | 89 ++++++
samples/task_isolation/task_isol_oneshot.c | 104 +++++++
samples/task_isolation/task_isol_userloop.c | 54 +++
9 files changed, 737 insertions(+)
Index: linux-2.6/Documentation/userspace-api/task_isolation.rst
===================================================================
--- /dev/null
+++ linux-2.6/Documentation/userspace-api/task_isolation.rst
@@ -0,0 +1,370 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================
+Task isolation prctl interface
+===============================
+
+Certain types of applications benefit from running uninterrupted by
+background OS activities. Realtime systems and high-bandwidth networking
+applications with user-space drivers can fall into the category.
+
+To create an OS noise free environment for the application, this
+interface allows userspace to inform the kernel the start and
+end of the latency sensitive application section (with configurable
+system behaviour for that section).
+
+Note: the prctl interface is independent of nohz_full=.
+
+The prctl options are:
+
+
+ - PR_ISOL_FEAT_GET: Retrieve supported features.
+ - PR_ISOL_CFG_GET: Retrieve task isolation configuration.
+ - PR_ISOL_CFG_SET: Set task isolation configuration.
+ - PR_ISOL_ACTIVATE_GET: Retrieve task isolation activation state.
+ - PR_ISOL_ACTIVATE_SET: Set task isolation activation state.
+
+Summary of terms:
+
+
+- feature:
+
+ A distinct attribute or aspect of task isolation. Examples of
+ features could be logging, new operating modes (eg: syscalls disallowed),
+ userspace notifications, etc. The only feature currently available is quiescing.
+
+- configuration:
+
+ A specific choice from a given set
+ of possible choices that dictate how the particular feature
+ in question should behave.
+
+- activation state:
+
+ The activation state (whether active/inactive) of the task
+ isolation features (features must be configured before
+ being activated).
+
+Inheritance of the isolation parameters and state, across
+fork(2) and clone(2), can be changed via
+PR_ISOL_CFG_GET/PR_ISOL_CFG_SET.
+
+
+At a high-level, task isolation is divided in two steps:
+
+1. Configuration.
+2. Activation.
+
+Section "Userspace support" describes how to use
+task isolation.
+
+In terms of the interface, the sequence of steps to activate
+task isolation are:
+
+1. Retrieve supported task isolation features (PR_ISOL_FEAT_GET).
+2. Configure task isolation features (PR_ISOL_CFG_GET/PR_ISOL_CFG_SET).
+3. Activate or deactivate task isolation features (PR_ISOL_ACTIVATE_GET/PR_ISOL_ACTIVATE_SET).
+
+This interface is based on ideas and code from the
+task isolation patchset from Alex Belits:
+https://lwn.net/Articles/816298/
+
+--------------------
+Feature description
+--------------------
+
+ - ``ISOL_F_QUIESCE``
+
+ This feature allows quiescing selected kernel activities on
+ return from system calls.
+
+---------------------
+Interface description
+---------------------
+
+**PR_ISOL_FEAT**:
+
+ Returns the supported features and feature
+ capabilities, as a bitmask::
+
+ prctl(PR_ISOL_FEAT, feat, arg3, arg4, arg5);
+
+ The 'feat' argument specifies whether to return
+ supported features (if zero), or feature capabilities
+ (if not zero). Possible values for 'feat' are:
+
+
+ - ``0``:
+ Return the bitmask of supported features, in the location
+ pointed to by ``(int *)arg3``. The buffer should allow space
+ for 8 bytes.
+
+ - ``ISOL_F_QUIESCE``:
+
+ Return a structure containing which kernel
+ activities are supported for quiescing, in the location
+ pointed to by ``(int *)arg3``::
+
+ struct task_isol_quiesce_extensions {
+ __u64 flags;
+ __u64 supported_quiesce_bits;
+ __u64 pad[6];
+ };
+
+ Where:
+
+ *flags*: Additional flags (should be zero).
+
+ *supported_quiesce_bits*: Bitmask indicating
+ which features are supported for quiescing.
+
+ *pad*: Additional space for future enhancements.
+
+
+ Features and its capabilities are defined at
+ include/uapi/linux/task_isolation.h.
+
+**PR_ISOL_CFG_GET**:
+
+ Retrieve task isolation configuration.
+ The general format is::
+
+ prctl(PR_ISOL_CFG_GET, what, arg3, arg4, arg5);
+
+ The 'what' argument specifies what to configure. Possible values are:
+
+ - ``I_CFG_FEAT``:
+
+ Return configuration of task isolation features. The 'arg3' argument specifies
+ whether to return configured features (if zero), or individual
+ feature configuration (if not zero), as follows.
+
+ - ``0``:
+
+ Return the bitmask of configured features, in the location
+ pointed to by ``(int *)arg4``. The buffer should allow space
+ for 8 bytes.
+
+ - ``ISOL_F_QUIESCE``:
+
+ If arg4 is QUIESCE_CONTROL, return the control structure for
+ quiescing of background kernel activities, in the location
+ pointed to by ``(int *)arg5``::
+
+ struct task_isol_quiesce_control {
+ __u64 flags;
+ __u64 quiesce_mask;
+ __u64 quiesce_oneshot_mask;
+ __u64 pad[5];
+ };
+
+ See PR_ISOL_CFG_GET description for meaning of fields.
+
+ - ``I_CFG_INHERIT``:
+
+ Retrieve inheritance configuration across fork/clone.
+
+ Return the structure which configures inheritance
+ across fork/clone, in the location pointed to
+ by ``(int *)arg4``::
+
+ struct task_isol_inherit_control {
+ __u8 inherit_mask;
+ __u8 pad[7];
+ };
+
+ See PR_ISOL_CFG_SET description for meaning of fields.
+
+**PR_ISOL_CFG_SET**:
+
+ Set task isolation configuration.
+ The general format is::
+
+ prctl(PR_ISOL_CFG_SET, what, arg3, arg4, arg5);
+
+ The 'what' argument specifies what to configure. Possible values are:
+
+ - ``I_CFG_FEAT``:
+
+ Set configuration of task isolation features. 'arg3' specifies
+ the feature. Possible values are:
+
+ - ``ISOL_F_QUIESCE``:
+
+ If arg4 is QUIESCE_CONTROL, set the control structure
+ for quiescing of background kernel activities, from
+ the location pointed to by ``(int *)arg5``::
+
+ struct task_isol_quiesce_control {
+ __u64 flags;
+ __u64 quiesce_mask;
+ __u64 quiesce_oneshot_mask;
+ __u64 pad[5];
+ };
+
+ Where:
+
+ *flags*: Additional flags (should be zero).
+
+ *quiesce_mask*: A bitmask containing which kernel
+ activities to quiesce.
+
+ *quiesce_oneshot_mask*: A bitmask indicating which kernel
+ activities should behave in oneshot mode, that is, quiescing
+ will happen on return from prctl(PR_ISOL_ACTIVATE_SET), but not
+ on return of subsequent system calls. The corresponding bit(s)
+ must also be set at quiesce_mask.
+
+ *pad*: Additional space for future enhancements.
+
+ For quiesce_mask (and quiesce_oneshot_mask), possible bit sets are:
+
+ - ``ISOL_F_QUIESCE_VMSTATS``
+
+ VM statistics are maintained in per-CPU counters to
+ improve performance. When a CPU modifies a VM statistic,
+ this modification is kept in the per-CPU counter.
+ Certain activities require a global count, which
+ involves requesting each CPU to flush its local counters
+ to the global VM counters.
+
+ This flush is implemented via a workqueue item, which
+ might schedule a workqueue on isolated CPUs.
+
+ To avoid this interruption, task isolation can be
+ configured to, upon return from system calls, synchronize
+ the per-CPU counters to global counters, thus avoiding
+ the interruption.
+
+ - ``I_CFG_INHERIT``:
+ Set inheritance configuration when a new task
+ is created via fork and clone.
+
+ The ``(int *)arg4`` argument is a pointer to::
+
+ struct task_isol_inherit_control {
+ __u8 inherit_mask;
+ __u8 pad[7];
+ };
+
+ inherit_mask is a bitmask that specifies which part
+ of task isolation should be inherited:
+
+ - Bit ISOL_INHERIT_CONF: Inherit task isolation configuration.
+ This is the state written via prctl(PR_ISOL_CFG_SET, ...).
+
+ - Bit ISOL_INHERIT_ACTIVE: Inherit task isolation activation
+ (requires ISOL_INHERIT_CONF to be set). The new task
+ should behave, after fork/clone, in the same manner
+ as the parent task after it executed:
+
+ prctl(PR_ISOL_ACTIVATE_SET, &mask, ...);
+
+**PR_ISOL_ACTIVATE_GET**:
+
+ Retrieve task isolation activation state.
+
+ The general format is::
+
+ prctl(PR_ISOL_ACTIVATE_GET, pmask, arg3, arg4, arg5);
+
+ 'pmask' specifies the location of a feature mask, where
+ the current active mask will be copied. See PR_ISOL_ACTIVATE_SET
+ for description of individual bits.
+
+
+**PR_ISOL_ACTIVATE_SET**:
+
+ Set task isolation activation state (activates/deactivates
+ task isolation).
+
+ The general format is::
+
+ prctl(PR_ISOL_ACTIVATE_SET, pmask, arg3, arg4, arg5);
+
+
+ The 'pmask' argument specifies the location of an 8 byte mask
+ containing which features should be activated. Features whose
+ bits are cleared will be deactivated. The possible
+ bits for this mask are:
+
+ - ``ISOL_F_QUIESCE``:
+
+ Activate quiescing of background kernel activities.
+ Quiescing happens on return to userspace from this
+ system call, and on return from subsequent
+ system calls (unless quiesce_oneshot_mask has been set at
+ PR_ISOL_CFG_SET time).
+
+ Quiescing can be adjusted (while active) by
+ prctl(PR_ISOL_ACTIVATE_SET, &new_mask, ...).
+
+
+==================
+Userspace support
+==================
+
+Task isolation is divided in two main steps: configuration and activation.
+
+Each step can be performed by an external tool or the latency sensitive
+application itself. util-linux contains the "chisol" tool for this
+purpose.
+
+This results in three combinations:
+
+1. Both configuration and activation performed by the
+latency sensitive application.
+Allows fine grained control of what task isolation
+features are enabled and when (see samples section below).
+
+2. Only activation can be performed by the latency sensitive app
+(and configuration performed by chisol).
+This allows the admin/user to control task isolation parameters,
+and applications have to be modified only once.
+
+3. Configuration and activation performed by an external tool.
+This allows unmodified applications to take advantage of
+task isolation. Activation is performed by the "-a" option
+of chisol.
+
+========
+Examples
+========
+
+The ``samples/task_isolation/`` directory contains 3 examples:
+
+* task_isol_userloop.c:
+
+ Example of program with a loop on userspace scenario.
+
+* task_isol_computation.c:
+
+ Example of program that enters task isolated mode,
+ performs an amount of computation, exits task
+ isolated mode, and writes the computation to disk.
+
+* task_isol_oneshot.c:
+
+ Example of program that enables one-shot
+ mode for quiescing, enters a processing loop, then upon an external
+ event performs a number of syscalls to handle that event.
+
+This is a snippet of code to activate task isolation if
+it has been previously configured (by chisol for example)::
+
+ #include <sys/prctl.h>
+ #include <linux/types.h>
+
+ #ifdef PR_ISOL_CFG_GET
+ unsigned long long fmask;
+
+ ret = prctl(PR_ISOL_CFG_GET, I_CFG_FEAT, 0, &fmask, 0);
+ if (ret != -1 && fmask != 0) {
+ ret = prctl(PR_ISOL_ACTIVATE_SET, &fmask, 0, 0, 0);
+ if (ret == -1) {
+ perror("prctl PR_ISOL_ACTIVATE_SET");
+ return ret;
+ }
+ }
+ #endif
+
Index: linux-2.6/samples/task_isolation/task_isol.c
===================================================================
--- /dev/null
+++ linux-2.6/samples/task_isolation/task_isol.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <sys/mman.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+#include <errno.h>
+#include "task_isol.h"
+
+#ifdef PR_ISOL_FEAT_GET
+int task_isol_setup(int oneshot)
+{
+ int ret;
+ int errnosv;
+ unsigned long long fmask;
+ struct task_isol_quiesce_extensions qext;
+ struct task_isol_quiesce_control qctrl;
+
+ /* Retrieve supported task isolation features */
+ ret = prctl(PR_ISOL_FEAT_GET, 0, &fmask, 0, 0);
+ if (ret == -1) {
+ perror("prctl PR_ISOL_FEAT");
+ return ret;
+ }
+ printf("supported features bitmask: 0x%llx\n", fmask);
+
+ /* Retrieve supported ISOL_F_QUIESCE bits */
+ ret = prctl(PR_ISOL_FEAT_GET, ISOL_F_QUIESCE, &qext, 0, 0);
+ if (ret == -1) {
+ perror("prctl PR_ISOL_FEAT (ISOL_F_QUIESCE)");
+ return ret;
+ }
+ printf("supported ISOL_F_QUIESCE bits: 0x%llx\n",
+ qext.supported_quiesce_bits);
+
+ fmask = 0;
+ ret = prctl(PR_ISOL_CFG_GET, I_CFG_FEAT, 0, &fmask, 0);
+ errnosv = errno;
+ if (ret != -1 && fmask != 0) {
+ printf("Task isolation parameters already configured!\n");
+ return ret;
+ }
+ if (ret == -1 && errnosv != ENODATA) {
+ perror("prctl PR_ISOL_GET");
+ return ret;
+ }
+ memset(&qctrl, 0, sizeof(struct task_isol_quiesce_control));
+ qctrl.quiesce_mask = ISOL_F_QUIESCE_VMSTATS;
+ if (oneshot)
+ qctrl.quiesce_oneshot_mask = ISOL_F_QUIESCE_VMSTATS;
+
+ ret = prctl(PR_ISOL_CFG_SET, I_CFG_FEAT, ISOL_F_QUIESCE,
+ QUIESCE_CONTROL, &qctrl);
+ if (ret == -1) {
+ perror("prctl PR_ISOL_CFG_SET");
+ return ret;
+ }
+ return ISOL_F_QUIESCE;
+}
+
+int task_isol_activate_set(unsigned long long mask)
+{
+ int ret;
+
+ ret = prctl(PR_ISOL_ACTIVATE_SET, &mask, 0, 0, 0);
+ if (ret == -1) {
+ perror("prctl PR_ISOL_ACTIVATE_SET");
+ return -1;
+ }
+
+ return 0;
+}
+
+#else
+
+int task_isol_setup(void)
+{
+ return 0;
+}
+
+int task_isol_activate_set(unsigned long long mask)
+{
+ return 0;
+}
+#endif
+
+
Index: linux-2.6/samples/task_isolation/task_isol.h
===================================================================
--- /dev/null
+++ linux-2.6/samples/task_isolation/task_isol.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TASK_ISOL_H
+#define __TASK_ISOL_H
+
+int task_isol_setup(int oneshot);
+
+int task_isol_activate_set(unsigned long long mask);
+
+#endif /* __TASK_ISOL_H */
Index: linux-2.6/samples/task_isolation/task_isol_userloop.c
===================================================================
--- /dev/null
+++ linux-2.6/samples/task_isolation/task_isol_userloop.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <sys/mman.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+#include "task_isol.h"
+
+int main(void)
+{
+ int ret;
+ void *buf = malloc(4096);
+ unsigned long mask;
+
+ memset(buf, 1, 4096);
+ ret = mlock(buf, 4096);
+ if (ret) {
+ perror("mlock");
+ return EXIT_FAILURE;
+ }
+
+ ret = task_isol_setup(0);
+ if (ret == -1)
+ return EXIT_FAILURE;
+
+ mask = ret;
+ /* enable quiescing on system call return, oneshot */
+ ret = task_isol_activate_set(mask);
+ if (ret)
+ return EXIT_FAILURE;
+
+#define NR_LOOPS 999999999
+#define NR_PRINT 100000000
+ /* busy loop */
+ while (ret < NR_LOOPS) {
+ memset(buf, 0, 4096);
+ ret = ret+1;
+ if (!(ret % NR_PRINT))
+ printf("loops=%d of %d\n", ret, NR_LOOPS);
+ }
+
+
+ ret = task_isol_activate_set(mask & ~ISOL_F_QUIESCE);
+ if (ret)
+ return EXIT_FAILURE;
+
+ return EXIT_SUCCESS;
+}
+
Index: linux-2.6/samples/Kconfig
===================================================================
--- linux-2.6.orig/samples/Kconfig
+++ linux-2.6/samples/Kconfig
@@ -223,4 +223,11 @@ config SAMPLE_WATCH_QUEUE
Build example userspace program to use the new mount_notify(),
sb_notify() syscalls and the KEYCTL_WATCH_KEY keyctl() function.
+config SAMPLE_TASK_ISOLATION
+ bool "task isolation sample"
+ depends on CC_CAN_LINK && HEADERS_INSTALL
+ help
+ Build example userspace program to use prctl task isolation
+ interface.
+
endif # SAMPLES
Index: linux-2.6/samples/Makefile
===================================================================
--- linux-2.6.orig/samples/Makefile
+++ linux-2.6/samples/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_SAMPLE_INTEL_MEI) += mei/
subdir-$(CONFIG_SAMPLE_WATCHDOG) += watchdog
subdir-$(CONFIG_SAMPLE_WATCH_QUEUE) += watch_queue
obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak/
+subdir-$(CONFIG_SAMPLE_TASK_ISOLATION) += task_isolation
Index: linux-2.6/samples/task_isolation/Makefile
===================================================================
--- /dev/null
+++ linux-2.6/samples/task_isolation/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+userprogs-always-y += task_isol_userloop task_isol_computation task_isol_oneshot
+task_isol_userloop-objs := task_isol.o task_isol_userloop.o
+task_isol_computation-objs := task_isol.o task_isol_computation.o
+task_isol_oneshot-objs := task_isol.o task_isol_oneshot.o
+
+userccflags += -I usr/include
+
+
+#$(CC) $^ -o $@
Index: linux-2.6/samples/task_isolation/task_isol_computation.c
===================================================================
--- /dev/null
+++ linux-2.6/samples/task_isolation/task_isol_computation.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Example of task isolation prctl interface with a loop:
+ *
+ * do {
+ * enable quiescing of kernel activities
+ * perform computation
+ * disable quiescing of kernel activities
+ * write computation results to disk
+ * } while (condition);
+ *
+ */
+#include <sys/mman.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+#include "task_isol.h"
+
+int main(void)
+{
+ int ret, fd, write_loops;
+ void *buf = malloc(4096);
+ unsigned long mask;
+
+ fd = open("/tmp/comp_output.data", O_RDWR|O_CREAT);
+ if (fd == -1) {
+ perror("open");
+ return EXIT_FAILURE;
+ }
+
+ memset(buf, 1, 4096);
+ ret = mlock(buf, 4096);
+ if (ret) {
+ perror("mlock");
+ return EXIT_FAILURE;
+ }
+
+ ret = task_isol_setup(0);
+ if (ret == -1)
+ return EXIT_FAILURE;
+
+ mask = ret;
+
+ write_loops = 0;
+ do {
+#define NR_LOOPS 999999999
+#define NR_PRINT 100000000
+ /* enable quiescing on system call return */
+ ret = task_isol_activate_set(mask);
+ if (ret)
+ return EXIT_FAILURE;
+
+ /* busy loop */
+ while (ret < NR_LOOPS) {
+ memset(buf, 0xf, 4096);
+ ret = ret+1;
+ if (!(ret % NR_PRINT))
+ printf("wloop=%d loops=%d of %d\n", write_loops,
+ ret, NR_LOOPS);
+ }
+ /* disable quiescing on system call return */
+ ret = task_isol_activate_set(mask & ~ISOL_F_QUIESCE);
+ if (ret)
+ return EXIT_FAILURE;
+
+ /*
+ * write computed data to disk, this would be
+ * multiple writes on a real application, so
+ * disabling quiescing is advantageous
+ */
+ ret = write(fd, buf, 4096);
+ if (ret == -1) {
+ perror("write");
+ return EXIT_FAILURE;
+ }
+
+ write_loops += 1;
+ } while (write_loops < 5);
+
+
+ return EXIT_SUCCESS;
+}
+
Index: linux-2.6/samples/task_isolation/task_isol_oneshot.c
===================================================================
--- /dev/null
+++ linux-2.6/samples/task_isolation/task_isol_oneshot.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Example of task isolation prctl interface using
+ * oneshot mode for quiescing.
+ *
+ *
+ * enable oneshot quiescing of kernel activities
+ * do {
+ * process data (no system calls)
+ * if (event) {
+ * process event with syscalls
+ * enable oneshot quiescing of kernel activities
+ * }
+ * } while (!exit_condition);
+ *
+ */
+#include <sys/mman.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+#include "task_isol.h"
+
+int main(void)
+{
+ int ret, fd, cnt;
+ void *buf = malloc(4096);
+ unsigned long mask;
+
+ fd = open("/dev/zero", O_RDONLY);
+ if (fd == -1) {
+ perror("open");
+ return EXIT_FAILURE;
+ }
+
+ memset(buf, 1, 4096);
+ ret = mlock(buf, 4096);
+ if (ret) {
+ perror("mlock");
+ return EXIT_FAILURE;
+ }
+
+ ret = task_isol_setup(1);
+ if (ret == -1)
+ return EXIT_FAILURE;
+
+ mask = ret;
+
+#define NR_LOOPS 999999999
+#define NR_PRINT 100000000
+
+ /* enable quiescing on system call return, oneshot */
+ ret = task_isol_activate_set(mask);
+ if (ret)
+ return EXIT_FAILURE;
+ /* busy loop */
+ cnt = 0;
+ while (cnt < NR_LOOPS) {
+ memset(buf, 0xf, 4096);
+ cnt = cnt+1;
+ if (!(cnt % NR_PRINT)) {
+ int i, r;
+
+ /* this could be considered handling an external
+ * event: with one-shot mode, system calls
+ * after prctl(PR_SET_ACTIVATE) will not incur
+ * the penalty of quiescing
+ */
+ printf("loops=%d of %d\n", cnt, NR_LOOPS);
+ for (i = 0; i < 100; i++) {
+ r = read(fd, buf, 4096);
+ if (r == -1) {
+ perror("read");
+ return EXIT_FAILURE;
+ }
+ }
+
+ ret = munlock(buf, 4096);
+ if (ret) {
+ perror("munlock");
+ return EXIT_FAILURE;
+ }
+
+ ret = mlock(buf, 4096);
+ if (ret) {
+ perror("mlock");
+ return EXIT_FAILURE;
+ }
+
+ /* enable quiescing on system call return */
+ ret = task_isol_activate_set(mask);
+ if (ret)
+ return EXIT_FAILURE;
+ }
+ }
+
+ return EXIT_SUCCESS;
+}
+