[patch v7 00/10] extensible prctl task isolation interface and vmstat sync
From: Marcelo Tosatti
Date: Fri Nov 12 2021 - 07:44:34 EST
The logic to disable vmstat worker thread, when entering
nohz full, does not cover all scenarios. For example, it is possible
for the following to happen:
1) enter nohz_full, which calls refresh_cpu_vm_stats, syncing the stats.
2) app runs mlock, which increases counters for mlock'ed pages.
3) start -RT loop
Since refresh_cpu_vm_stats from nohz_full logic can happen _before_
the mlock, vmstat shepherd can restart vmstat worker thread on
the CPU in question.
To fix this, add task isolation prctl interface to quiesce
deferred actions when returning to userspace.
The patchset is based on ideas and code from the
task isolation patchset from Alex Belits:
https://lwn.net/Articles/816298/
Please refer to Documentation/userspace-api/task_isolation.rst
(patch 1) for details. Its attached at the end of this message
in .txt format as well.
Note: the prctl interface is independent of nohz_full=.
The userspace patches can be found at https://people.redhat.com/~mtosatti/task-isol-v6-userspace-patches/
- qemu-task-isolation.patch: activate task isolation from CPU execution loop
- rt-tests-task-isolation.patch: add task isolation activation to cyclictest/oslat
- util-linux-chisol.patch: add chisol tool to util-linux.
---
v7
- no changes (resending series without changelog corruption).
v6
- Move oneshot mode enablement to configuration time (Frederic Weisbecker).
- Allow more extensions to CFG_SET of ISOL_F_QUIESCE (Frederic Weisbecker).
- Update docs and samples regarding oneshot mode (Frederic Weisbecker).
- Update docs and samples regarding more extensibility of
CFG_SET of ISOL_F_QUIESCE (Frederic Weisbecker).
- prctl_task_isolation_activate_get should copy active_mask
to address in arg2.
- modify exit_to_user_mode_loop to cover exceptions
and interrupts.
- split exit hooks into its own patch
v5
- Add changelogs to individual patches (Peter Zijlstra).
- Add documentation to patchset intro (Peter Zijlstra).
v4:
- Switch to structures for parameters when possible
(which are more extensible).
- Switch to CFG_{S,G}ET naming and use drop
"internal configuration" prctls (Frederic Weisbecker).
- Add summary of terms to documentation (Frederic Weisbecker).
- Examples for compute and one-shot modes (Thomas G/Christoph L).
v3:
- Split in smaller patches (Nitesh Lal).
- Misc cleanups (Nitesh Lal).
- Clarify nohz_full is not a dependency (Nicolas Saenz).
- Incorrect values for prctl definitions (kernel robot).
- Save configured state, so applications
can activate externally configured
task isolation parameters.
- Remove "system default" notion (chisol should
make it obsolete).
- Update documentation: add new section with explanation
about configuration/activation and code example.
- Update samples.
- Report configuration/activation state at
/proc/pid/task_isolation.
- Condense dirty information of per-CPU vmstats counters
in a bool.
- In-kernel KVM support.
v2:
- Finer-grained control of quiescing (Frederic Weisbecker / Nicolas Saenz).
- Avoid potential regressions by allowing applications
to use ISOL_F_QUIESCE_DEFMASK (whose default value
is configurable in /sys/). (Nitesh Lal / Nicolas Saenz).
v5 can be found at:
https://lore.kernel.org/lkml/20211019152431.885037499@fedora.localdomain/
v4 can be found at:
https://lore.kernel.org/all/20211007192346.731667417@fedora.localdomain/
v3 can be found at:
https://lore.kernel.org/lkml/20210824152423.300346181@xxxxxxxxxxx/
v2 can be found at:
https://lore.kernel.org/patchwork/project/lkml/list/?series=510225
---
Documentation/userspace-api/task_isolation.rst | 370 +++++++++++++++++++++++
fs/proc/base.c | 68 ++++
include/linux/entry-kvm.h | 4
include/linux/sched.h | 5
include/linux/task_isolation.h | 138 ++++++++
include/linux/vmstat.h | 19 +
include/uapi/linux/prctl.h | 43 ++
init/init_task.c | 3
kernel/Makefile | 2
kernel/entry/common.c | 15
kernel/entry/kvm.c | 18 -
kernel/exit.c | 2
kernel/fork.c | 23 +
kernel/sys.c | 16 +
kernel/task_isolation.c | 388 +++++++++++++++++++++++++
mm/vmstat.c | 155 +++++++--
samples/Kconfig | 7
samples/Makefile | 1
samples/task_isolation/Makefile | 11
samples/task_isolation/task_isol.c | 92 +++++
samples/task_isolation/task_isol.h | 9
samples/task_isolation/task_isol_computation.c | 89 +++++
samples/task_isolation/task_isol_oneshot.c | 104 ++++++
samples/task_isolation/task_isol_userloop.c | 54 +++
24 files changed, 1591 insertions(+), 45 deletions(-)
---
Task isolation prctl interface
******************************
Certain types of applications benefit from running uninterrupted by
background OS activities. Realtime systems and high-bandwidth
networking applications with user-space drivers can fall into the
category.
To create an OS noise free environment for the application, this
interface allows userspace to inform the kernel the start and end of
the latency sensitive application section (with configurable system
behaviour for that section).
Note: the prctl interface is independent of nohz_full=.
The prctl options are:
* PR_ISOL_FEAT_GET: Retrieve supported features.
* PR_ISOL_CFG_GET: Retrieve task isolation configuration.
* PR_ISOL_CFG_SET: Set task isolation configuration.
* PR_ISOL_ACTIVATE_GET: Retrieve task isolation activation state.
* PR_ISOL_ACTIVATE_SET: Set task isolation activation state.
Summary of terms:
* feature:
A distinct attribute or aspect of task isolation. Examples of
features could be logging, new operating modes (eg: syscalls
disallowed), userspace notifications, etc. The only feature
currently available is quiescing.
* configuration:
A specific choice from a given set of possible choices that
dictate how the particular feature in question should behave.
* activation state:
The activation state (whether active/inactive) of the task
isolation features (features must be configured before being
activated).
Inheritance of the isolation parameters and state, across fork(2) and
clone(2), can be changed via PR_ISOL_CFG_GET/PR_ISOL_CFG_SET.
At a high-level, task isolation is divided in two steps:
1. Configuration.
2. Activation.
Section "Userspace support" describes how to use task isolation.
In terms of the interface, the sequence of steps to activate task
isolation are:
1. Retrieve supported task isolation features (PR_ISOL_FEAT_GET).
2. Configure task isolation features
(PR_ISOL_CFG_GET/PR_ISOL_CFG_SET).
3. Activate or deactivate task isolation features
(PR_ISOL_ACTIVATE_GET/PR_ISOL_ACTIVATE_SET).
This interface is based on ideas and code from the task isolation
patchset from Alex Belits: https://lwn.net/Articles/816298/
Feature description
===================
* "ISOL_F_QUIESCE"
This feature allows quiescing selected kernel activities on return
from system calls.
Interface description
=====================
**PR_ISOL_FEAT**:
Returns the supported features and feature capabilities, as a
bitmask:
prctl(PR_ISOL_FEAT, feat, arg3, arg4, arg5);
The 'feat' argument specifies whether to return supported features
(if zero), or feature capabilities (if not zero). Possible values
for 'feat' are:
* "0":
Return the bitmask of supported features, in the location
pointed to by "(int *)arg3". The buffer should allow space
for 8 bytes.
* "ISOL_F_QUIESCE":
Return a structure containing which kernel activities are
supported for quiescing, in the location pointed to by "(int
*)arg3":
struct task_isol_quiesce_extensions {
__u64 flags;
__u64 supported_quiesce_bits;
__u64 pad[6];
};
Where:
*flags*: Additional flags (should be zero).
*supported_quiesce_bits*: Bitmask indicating
which features are supported for quiescing.
*pad*: Additional space for future enhancements.
Features and its capabilities are defined at
include/uapi/linux/task_isolation.h.
**PR_ISOL_CFG_GET**:
Retrieve task isolation configuration. The general format is:
prctl(PR_ISOL_CFG_GET, what, arg3, arg4, arg5);
The 'what' argument specifies what to configure. Possible values
are:
* "I_CFG_FEAT":
Return configuration of task isolation features. The 'arg3'
argument specifies whether to return configured features (if
zero), or individual feature configuration (if not zero), as
follows.
* "0":
Return the bitmask of configured features, in the
location pointed to by "(int *)arg4". The buffer
should allow space for 8 bytes.
* "ISOL_F_QUIESCE":
If arg4 is QUIESCE_CONTROL, return the control structure
for quiescing of background kernel activities, in the
location pointed to by "(int *)arg5":
struct task_isol_quiesce_control {
__u64 flags;
__u64 quiesce_mask;
__u64 quiesce_oneshot_mask;
__u64 pad[5];
};
See PR_ISOL_CFG_GET description for meaning of fields.
* "I_CFG_INHERIT":
Retrieve inheritance configuration across fork/clone.
Return the structure which configures inheritance across
fork/clone, in the location pointed to by "(int *)arg4":
struct task_isol_inherit_control {
__u8 inherit_mask;
__u8 pad[7];
};
See PR_ISOL_CFG_SET description for meaning of fields.
**PR_ISOL_CFG_SET**:
Set task isolation configuration. The general format is:
prctl(PR_ISOL_CFG_SET, what, arg3, arg4, arg5);
The 'what' argument specifies what to configure. Possible values
are:
* "I_CFG_FEAT":
Set configuration of task isolation features. 'arg3' specifies
the feature. Possible values are:
* "ISOL_F_QUIESCE":
If arg4 is QUIESCE_CONTROL, set the control structure for
quiescing of background kernel activities, from the
location pointed to by "(int *)arg5":
struct task_isol_quiesce_control {
__u64 flags;
__u64 quiesce_mask;
__u64 quiesce_oneshot_mask;
__u64 pad[5];
};
Where:
*flags*: Additional flags (should be zero).
*quiesce_mask*: A bitmask containing which kernel
activities to quiesce.
*quiesce_oneshot_mask*: A bitmask indicating which kernel
activities should behave in oneshot mode, that is,
quiescing will happen on return from
prctl(PR_ISOL_ACTIVATE_SET), but not on return of
subsequent system calls. The corresponding bit(s) must
also be set at quiesce_mask.
*pad*: Additional space for future enhancements.
For quiesce_mask (and quiesce_oneshot_mask), possible bit
sets are:
* "ISOL_F_QUIESCE_VMSTATS"
VM statistics are maintained in per-CPU counters to
improve performance. When a CPU modifies a VM statistic,
this modification is kept in the per-CPU counter. Certain
activities require a global count, which involves
requesting each CPU to flush its local counters to the
global VM counters.
This flush is implemented via a workqueue item, which
might schedule a workqueue on isolated CPUs.
To avoid this interruption, task isolation can be
configured to, upon return from system calls, synchronize
the per-CPU counters to global counters, thus avoiding
the interruption.
* "I_CFG_INHERIT":
Set inheritance configuration when a new task is created via
fork and clone.
The "(int *)arg4" argument is a pointer to:
struct task_isol_inherit_control {
__u8 inherit_mask;
__u8 pad[7];
};
inherit_mask is a bitmask that specifies which part of task
isolation should be inherited:
* Bit ISOL_INHERIT_CONF: Inherit task isolation
configuration. This is the state written via
prctl(PR_ISOL_CFG_SET, ...).
* Bit ISOL_INHERIT_ACTIVE: Inherit task isolation activation
(requires ISOL_INHERIT_CONF to be set). The new task should
behave, after fork/clone, in the same manner as the parent
task after it executed:
prctl(PR_ISOL_ACTIVATE_SET, &mask, ...);
**PR_ISOL_ACTIVATE_GET**:
Retrieve task isolation activation state.
The general format is:
prctl(PR_ISOL_ACTIVATE_GET, pmask, arg3, arg4, arg5);
'pmask' specifies the location of a feature mask, where the current
active mask will be copied. See PR_ISOL_ACTIVATE_SET for
description of individual bits.
**PR_ISOL_ACTIVATE_SET**:
Set task isolation activation state (activates/deactivates task
isolation).
The general format is:
prctl(PR_ISOL_ACTIVATE_SET, pmask, arg3, arg4, arg5);
The 'pmask' argument specifies the location of an 8 byte mask
containing which features should be activated. Features whose bits
are cleared will be deactivated. The possible bits for this mask
are:
* "ISOL_F_QUIESCE":
Activate quiescing of background kernel activities. Quiescing
happens on return to userspace from this system call, and on
return from subsequent system calls (unless quiesce_oneshot_mask
has been set at PR_ISOL_CFG_SET time).
Quiescing can be adjusted (while active) by
prctl(PR_ISOL_ACTIVATE_SET, &new_mask, ...).
Userspace support
*****************
Task isolation is divided in two main steps: configuration and
activation.
Each step can be performed by an external tool or the latency
sensitive application itself. util-linux contains the "chisol" tool
for this purpose.
This results in three combinations:
1. Both configuration and activation performed by the latency
sensitive application. Allows fine grained control of what task
isolation features are enabled and when (see samples section below).
2. Only activation can be performed by the latency sensitive app (and
configuration performed by chisol). This allows the admin/user to
control task isolation parameters, and applications have to be
modified only once.
3. Configuration and activation performed by an external tool. This
allows unmodified applications to take advantage of task isolation.
Activation is performed by the "-a" option of chisol.
Examples
********
The "samples/task_isolation/" directory contains 3 examples:
* task_isol_userloop.c:
Example of program with a loop on userspace scenario.
* task_isol_computation.c:
Example of program that enters task isolated mode, performs an
amount of computation, exits task isolated mode, and writes the
computation to disk.
* task_isol_oneshot.c:
Example of program that enables one-shot mode for quiescing,
enters a processing loop, then upon an external event performs a
number of syscalls to handle that event.
This is a snippet of code to activate task isolation if it has been
previously configured (by chisol for example):
#include <sys/prctl.h>
#include <linux/types.h>
#ifdef PR_ISOL_CFG_GET
unsigned long long fmask;
ret = prctl(PR_ISOL_CFG_GET, I_CFG_FEAT, 0, &fmask, 0);
if (ret != -1 && fmask != 0) {
ret = prctl(PR_ISOL_ACTIVATE_SET, &fmask, 0, 0, 0);
if (ret == -1) {
perror("prctl PR_ISOL_ACTIVATE_SET");
return ret;
}
}
#endif