[PATCH 5.15 650/917] scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@xxxxxxxxx>

[ Upstream commit d305c253af693e69a36cedec880aca6d0c6d789d ]

A prior patch introduced HBA_NEEDS_CFG_PORT flag logic, but in
lpfc_sli_brdrestart_s3() code path, right after HBA_NEEDS_CFG_PORT is set,
the phba->hba_flag is cleared in lpfc_sli_brdreset().

Fix by calling lpfc_sli_chipset_init() to wait for successful restart of
the HBA in lpfc_host_reset_handler() after lpfc_sli_brdrestart().

lpfc_sli_chipset_init() sets the HBA_NEEDS_CFG_PORT flag so that the
lpfc_sli_hba_setup() routine from lpfc_online() will execute
lpfc_sli_config_port() initialization step when the brdrestart is
successful.

Link: https://lore.kernel.org/r/20211020211417.88754-3-jsmart2021@xxxxxxxxx
Fixes: d2f2547efd39 ("scsi: lpfc: Fix auto sli_mode and its effect on CONFIG_PORT for SLI3")
Co-developed-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index befdf864c43bd..364c8a9b99095 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6628,6 +6628,13 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
 	if (rc)
 		goto error;
 
+	/* Wait for successful restart of adapter */
+	if (phba->sli_rev < LPFC_SLI_REV4) {
+		rc = lpfc_sli_chipset_init(phba);
+		if (rc)
+			goto error;
+	}
+
 	rc = lpfc_online(phba);
 	if (rc)
 		goto error;
-- 
2.33.0