Re: [PATCH V3 0/9] arm64: imx8mn: Enable more imx8m Nano functions

[Tim Harvey]

On Thu, Nov 4, 2021 at 9:18 AM Adam Ford <aford173@xxxxxxxxx> wrote:
>
> The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very
> different in others.  With the blk-ctrl driver for Mini in place,
> this series expands the blk-ctrl driver to support the Nano which
> opens the door for additional functions in the future.  As part of
> this series, it also addresses some issues in the GPCv2 driver and
> finally adds support for enabling USB and GPU.
>
> V3:  Fixes an the yaml example
> V2:  Fixes the clock count in the blk-ctrl
>
> Adam Ford (9):
>   soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
>   soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
>   dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
>   dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
>   soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
>   arm64: dts: imx8mn: add GPC node
>   arm64: dts: imx8mn: put USB controller into power-domains
>   arm64: dts: imx8mn: add DISP blk-ctrl
>   arm64: dts: imx8mn: Enable GPU
>
>  .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml     |  97 +++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mn.dtsi     | 103 ++++++++++++++++++
>  drivers/soc/imx/gpcv2.c                       |  26 +++++
>  drivers/soc/imx/imx8m-blk-ctrl.c              |  75 ++++++++++++-
>  include/dt-bindings/power/imx8mn-power.h      |   5 +
>  5 files changed, 305 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
>

Adam,

Thanks for the patches. I'm not sure how best to test this but on an
imx8mm-venice-gw7902 which has USB, but no display.

I find that if DRM_ETNAVIV is enabled I hang at 'etnaviv etnaviv:
bound 38000000.gpu (ops 0xffff800010964748)'.

If DRM_ETNAVIV is not enabled:
- boots fine
- usb works
- soft reboot works (does not hang)

Best regards,

Tim