[PATCH V3] pwm: Use div64_ul instead of do_div

[cgel . zte]

From: Changcheng Deng <deng.changcheng@xxxxxxxxxx>

do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.

Reported-by: Zeal Robot <zealci@xxxxxxxxxx>
Signed-off-by: Changcheng Deng <deng.changcheng@xxxxxxxxxx>
---
 drivers/pwm/pwm-atmel-hlcdc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
index a43b2babc809..1ae3d73b9832 100644
--- a/drivers/pwm/pwm-atmel-hlcdc.c
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -60,7 +60,7 @@ static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
 				return -EINVAL;
 
 			clk_period_ns = (u64)NSEC_PER_SEC * 256;
-			do_div(clk_period_ns, clk_freq);
+			clk_period_ns = div64_ul(clk_period_ns, clk_freq);
 		}
 
 		/* Errata: cannot use slow clk on some IP revisions */
@@ -72,7 +72,7 @@ static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
 				return -EINVAL;
 
 			clk_period_ns = (u64)NSEC_PER_SEC * 256;
-			do_div(clk_period_ns, clk_freq);
+			clk_period_ns = div64_ul(clk_period_ns, clk_freq);
 		}
 
 		for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
-- 
2.25.1