Re: [PATCH bpf] selfetests/bpf: Adapt vmtest.sh to s390 libbpf CI changes

[sunyucong@xxxxxxxxx]

On Thu, Nov 18, 2021 at 3:54 AM Ilya Leoshkevich <iii@xxxxxxxxxxxxx> wrote:
>
> [1] added s390 support to libbpf CI and added an ${ARCH} prefix to a
> number of paths and identifiers in libbpf GitHub repo, which vmtest.sh
> relies upon. Update these and make use of the new s390 support.
>
> [1] https://github.com/libbpf/libbpf/pull/204
>
> Co-developed-by: Andrii Nakryiko <andrii@xxxxxxxxxx>
> Signed-off-by: Andrii Nakryiko <andrii@xxxxxxxxxx>
> Signed-off-by: Ilya Leoshkevich <iii@xxxxxxxxxxxxx>
> ---
>  tools/testing/selftests/bpf/vmtest.sh | 46 ++++++++++++++++++---------
>  1 file changed, 31 insertions(+), 15 deletions(-)
>
> diff --git a/tools/testing/selftests/bpf/vmtest.sh b/tools/testing/selftests/bpf/vmtest.sh
> index 027198768fad..5e43c79ddc6e 100755
> --- a/tools/testing/selftests/bpf/vmtest.sh
> +++ b/tools/testing/selftests/bpf/vmtest.sh
> @@ -4,17 +4,34 @@
>  set -u
>  set -e
>
> -# This script currently only works for x86_64, as
> -# it is based on the VM image used by the BPF CI which is
> -# x86_64.
> -QEMU_BINARY="${QEMU_BINARY:="qemu-system-x86_64"}"
> -X86_BZIMAGE="arch/x86/boot/bzImage"
> +# This script currently only works for x86_64 and s390x, as
> +# it is based on the VM image used by the BPF CI, which is
> +# available only for these architectures.
> +ARCH="$(uname -m)"
> +case "${ARCH}" in
> +s390x)
> +       QEMU_BINARY=qemu-system-s390x
> +       QEMU_CONSOLE="ttyS1"
> +       QEMU_FLAGS=(-smp 2)
> +       BZIMAGE="arch/s390/boot/compressed/vmlinux"
> +       ;;
> +x86_64)
> +       QEMU_BINARY=qemu-system-x86_64
> +       QEMU_CONSOLE="ttyS0,115200"
> +       QEMU_FLAGS=(-cpu host -smp 8)
> +       BZIMAGE="arch/x86/boot/bzImage"
> +       ;;
> +*)
> +       echo "Unsupported architecture"
> +       exit 1
> +       ;;
> +esac
>  DEFAULT_COMMAND="./test_progs"
>  MOUNT_DIR="mnt"
>  ROOTFS_IMAGE="root.img"
>  OUTPUT_DIR="$HOME/.bpf_selftests"
> -KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/configs/latest.config";
> -KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/configs/latest.config";
> +KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/configs/config-latest.${ARCH}";
> +KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/configs/config-latest.${ARCH}";
>  INDEX_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/configs/INDEX";
>  NUM_COMPILE_JOBS="$(nproc)"
>  LOG_FILE_BASE="$(date +"bpf_selftests.%Y-%m-%d_%H-%M-%S")"
> @@ -85,7 +102,7 @@ newest_rootfs_version()
>  {
>         {
>         for file in "${!URLS[@]}"; do
> -               if [[ $file =~ ^libbpf-vmtest-rootfs-(.*)\.tar\.zst$ ]]; then
> +               if [[ $file =~ ^"${ARCH}"/libbpf-vmtest-rootfs-(.*)\.tar\.zst$ ]]; then
>                         echo "${BASH_REMATCH[1]}"
>                 fi
>         done
> @@ -102,7 +119,7 @@ download_rootfs()
>                 exit 1
>         fi
>
> -       download "libbpf-vmtest-rootfs-$rootfsversion.tar.zst" |
> +       download "${ARCH}/libbpf-vmtest-rootfs-$rootfsversion.tar.zst" |
>                 zstd -d | sudo tar -C "$dir" -x
>  }
>
> @@ -224,13 +241,12 @@ EOF
>                 -nodefaults \
>                 -display none \
>                 -serial mon:stdio \
> -               -cpu host \
> +               "${qemu_flags[@]}" \
>                 -enable-kvm \
> -               -smp 8 \
>                 -m 4G \
>                 -drive file="${rootfs_img}",format=raw,index=1,media=disk,if=virtio,cache=none \
>                 -kernel "${kernel_bzimage}" \
> -               -append "root=/dev/vda rw console=ttyS0,115200"
> +               -append "root=/dev/vda rw console=${QEMU_CONSOLE}"
>  }
>
>  copy_logs()
> @@ -282,7 +298,7 @@ main()
>         local kernel_checkout=$(realpath "${script_dir}"/../../../../)
>         # By default the script searches for the kernel in the checkout directory but
>         # it also obeys environment variables O= and KBUILD_OUTPUT=
> -       local kernel_bzimage="${kernel_checkout}/${X86_BZIMAGE}"
> +       local kernel_bzimage="${kernel_checkout}/${BZIMAGE}"
>         local command="${DEFAULT_COMMAND}"
>         local update_image="no"
>         local exit_command="poweroff -f"
> @@ -337,13 +353,13 @@ main()
>                 if is_rel_path "${O}"; then
>                         O="$(realpath "${PWD}/${O}")"
>                 fi
> -               kernel_bzimage="${O}/${X86_BZIMAGE}"
> +               kernel_bzimage="${O}/${BZIMAGE}"
>                 make_command="${make_command} O=${O}"
>         elif [[ "${KBUILD_OUTPUT:=""}" != "" ]]; then
>                 if is_rel_path "${KBUILD_OUTPUT}"; then
>                         KBUILD_OUTPUT="$(realpath "${PWD}/${KBUILD_OUTPUT}")"
>                 fi
> -               kernel_bzimage="${KBUILD_OUTPUT}/${X86_BZIMAGE}"
> +               kernel_bzimage="${KBUILD_OUTPUT}/${BZIMAGE}"
>                 make_command="${make_command} KBUILD_OUTPUT=${KBUILD_OUTPUT}"
>         fi
>
> --
> 2.31.1
>

Acked-By: Yucong Sun <sunyucong@xxxxxxxxx>