Re: [PATCH v4 2/8] arm64: dts: qcom: sdm630-pm660: Move RESIN to pm660 dtsi

[Caleb Connolly]

On 20/11/2021 21:42, Dang Huynh wrote:
> It's not worth duplicating the same node over and over again,
> so let's keep the common bits in the pm660 DTSI, making only
> changing the status and keycode necessary.
>
> Also, disable RESIN/PWR by default just in case if there are
> devices that doesn't use them.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/pm660.dtsi              | 12 +++++++++++-
>   .../boot/dts/qcom/sdm630-sony-xperia-nile.dtsi   | 16 ++++++++--------
>   2 files changed, 19 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
> index d0ef8a1675e2..c482663aad56 100644
> --- a/arch/arm64/boot/dts/qcom/pm660.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
> @@ -54,14 +54,24 @@ pon: pon@800 {
>   			mode-bootloader = <0x2>;
>   			mode-recovery = <0x1>;
>
> -			pwrkey {
> +			pon_pwrkey: pwrkey {
>   				compatible = "qcom,pm8941-pwrkey";
>   				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
>   				debounce = <15625>;
>   				bias-pull-up;
>   				linux,code = <KEY_POWER>;
> +
> +				status = "disabled";
>   			};
>
> +			pon_resin: resin {
> +				compatible = "qcom,pm8941-resin";
> +				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +
> +				status = "disabled";
> +			};
>   		};
>
>   		pm660_temp: temp-alarm@2400 {
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> index 11d0a8c1cf35..e90c9ec84675 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> @@ -215,14 +215,14 @@ &blsp2_uart1 {
>   	/* HCI Bluetooth */
>   };
>
> -&pon {
> -	volup {
> -		compatible = "qcom,pm8941-resin";
> -		interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> -		debounce = <15625>;
> -		bias-pull-up;
> -		linux,code = <KEY_VOLUMEUP>;
> -	};
> +&pon_pwrkey {
> +	status = "okay";
> +};
> +
> +&pon_resin {
> +	status = "okay";
> +
> +	linux,code = <KEY_VOLUMEUP>;
>   };
>
>   &qusb2phy {
> --
> 2.33.1
>

Reviewed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>

--
Kind Regards,
Caleb