Re: [PATCH v3] m68k: Enable memtest functionality

From: Mike Rapoport
Date: Sun Nov 21 2021 - 01:29:44 EST


On Fri, Nov 19, 2021 at 09:29:38AM +1100, Finn Thain wrote:
> Enable the memtest functionality and rearrange some code to prevent it
> from clobbering the initrd.
>
> The code to implement CONFIG_BLK_DEV_INITRD was conditional on
> !defined(CONFIG_SUN3). For simplicity, remove that test on the basis
> that m68k_ramdisk.size == 0 on Sun 3. The SLIME source code at
> http://sammy.net/sun3/ftp/pub/m68k/sun3/slime/slime-2.0.tar.gz
> indicates that no BI_RAMDISK entry is ever passed to the kernel due
> to #ifdef 0 around the relevant code.
>
> Cc: Mike Rapoport <rppt@xxxxxxxxxx>
> Cc: Sam Creasey <sammy@xxxxxxxxx>
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxx>

Acked-by: Mike Rapoport <rppt@xxxxxxxxxxxxx>

> ---
> Is SLIME the only Linux bootloader on Sun 3?
> ---
> Changed since v2:
> - Made conditional on MMU_MOTOROLA.
>
> Changed since v1:
> - Updated documentation.
> ---
> Documentation/admin-guide/kernel-parameters.txt | 2 +-
> arch/m68k/Kconfig | 1 +
> arch/m68k/kernel/setup_mm.c | 15 ++++++---------
> arch/m68k/mm/motorola.c | 2 ++
> 4 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 43dc35fe5bc0..ac42b421a95c 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -2924,7 +2924,7 @@
> both parameters are enabled, hugetlb_free_vmemmap takes
> precedence over memory_hotplug.memmap_on_memory.
>
> - memtest= [KNL,X86,ARM,PPC,RISCV] Enable memtest
> + memtest= [KNL,X86,ARM,M68K,PPC,RISCV] Enable memtest
> Format: <integer>
> default : 0 <disable>
> Specifies the number of memtest passes to be
> diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
> index 0b50da08a9c5..4cae3fbe7f97 100644
> --- a/arch/m68k/Kconfig
> +++ b/arch/m68k/Kconfig
> @@ -9,6 +9,7 @@ config M68K
> select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
> select ARCH_MIGHT_HAVE_PC_PARPORT if ISA
> select ARCH_NO_PREEMPT if !COLDFIRE
> + select ARCH_USE_MEMTEST if MMU_MOTOROLA
> select ARCH_WANT_IPC_PARSE_VERSION
> select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
> select DMA_DIRECT_REMAP if HAS_DMA && MMU && !COLDFIRE
> diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
> index 4b51bfd38e5f..49e573b94326 100644
> --- a/arch/m68k/kernel/setup_mm.c
> +++ b/arch/m68k/kernel/setup_mm.c
> @@ -338,13 +338,6 @@ void __init setup_arch(char **cmdline_p)
> panic("No configuration setup");
> }
>
> - paging_init();
> -
> -#ifdef CONFIG_NATFEAT
> - nf_init();
> -#endif
> -
> -#ifndef CONFIG_SUN3
> #ifdef CONFIG_BLK_DEV_INITRD
> if (m68k_ramdisk.size) {
> memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size);
> @@ -354,6 +347,12 @@ void __init setup_arch(char **cmdline_p)
> }
> #endif
>
> + paging_init();
> +
> +#ifdef CONFIG_NATFEAT
> + nf_init();
> +#endif
> +
> #ifdef CONFIG_ATARI
> if (MACH_IS_ATARI)
> atari_stram_reserve_pages((void *)availmem);
> @@ -364,8 +363,6 @@ void __init setup_arch(char **cmdline_p)
> }
> #endif
>
> -#endif /* !CONFIG_SUN3 */
> -
> /* set ISA defs early as possible */
> #if defined(CONFIG_ISA) && defined(MULTI_ISA)
> if (MACH_IS_Q40) {
> diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
> index 9f3f77785aa7..5b6575eb6d02 100644
> --- a/arch/m68k/mm/motorola.c
> +++ b/arch/m68k/mm/motorola.c
> @@ -455,6 +455,8 @@ void __init paging_init(void)
>
> flush_tlb_all();
>
> + early_memtest(min_addr, max_addr);
> +
> /*
> * initialize the bad page table and bad page to point
> * to a couple of allocated pages
> --
> 2.26.3
>

--
Sincerely yours,
Mike.