Re: [PATCH] of/irq: Add a quirk for controllers with their own definition of interrupt-map
From: Geert Uytterhoeven
Date: Mon Nov 22 2021 - 11:58:43 EST
Hi Marc,
On Mon, Nov 22, 2021 at 2:54 PM Marc Zyngier <maz@xxxxxxxxxx> wrote:
> On Mon, 22 Nov 2021 13:10:32 +0000,
> Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> > On Mon, Nov 22, 2021 at 11:30 AM Marc Zyngier <maz@xxxxxxxxxx> wrote:
> > > Since 041284181226 ("of/irq: Allow matching of an interrupt-map local
> > > to an interrupt controller"), a handful of interrupt controllers have
> > > stopped working correctly. This is due to the DT exposing a non-sensical
> > > interrupt-map property, and their drivers relying on the kernel ignoring
> > > this property.
> > >
> > > Since we cannot realistically fix this terrible behaviour, add a quirk
> > > for the limited set of devices that have implemented this monster,
> > > and document that this is a pretty bad practice.
> > > --- a/drivers/of/irq.c
> > > +++ b/drivers/of/irq.c
> > > @@ -76,6 +76,36 @@ struct device_node *of_irq_find_parent(struct device_node *child)
> > > }
> > > EXPORT_SYMBOL_GPL(of_irq_find_parent);
> > >
> > > +/*
> > > + * These interrupt controllers abuse interrupt-map for unspeakable
> > > + * reasons and rely on the core code to *ignore* it (the drivers do
> > > + * their own parsing of the property).
> > > + *
> > > + * If you think of adding to the list for something *new*, think
> > > + * again. There is a high chance that you will be sent back to the
> > > + * drawing board.
> > > + */
> > > +static const char * const of_irq_imap_abusers[] = {
> > > + "CBEA,platform-spider-pic",
> > > + "sti,platform-spider-pic",
> > > + "realtek,rtl-intc",
> > > + "fsl,ls1021a-extirq",
> > > + "fsl,ls1043a-extirq",
> > > + "fsl,ls1088a-extirq",
> > > + "renesas,rza1-irqc",
> > > +};
> >
> > Are you sure "renesas,rza1-irqc" handles this wrong? How should it
> > be handled instead? I read the other thread[1], but didn't became
> > any wiser: interrupts are mapped one-to-one with the RZ/A1 IRQC.
> >
> > In both v5.15 and v5.16-rc1, interrupts seem to work fine on RSK+RZA1
> > and RZA2MEVB, both with gpio-keys and when used as a wake-up interrupt.
Oops, it turned out my "v5.15" tree was not plain v5.15, but v5.15 with
some parts of next, including an older version of commit 041284181226.
> This is odd. 5.16-rc1 should actively breaks the behaviour, as each
> interrupt is directly routed to the GIC. Here's an extract of the DT
> for r7s9210:
>
> interrupt-map = <0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> <1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> <2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> <3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> <4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> <5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> <6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> <7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>
> I expect v5.16-rc1 to honour the routing described here and not
> involve rza1-irqc, because that's what the DT says.
>
> > With this patch applied, I see double keypresses with evtest: when
> > pressing a key, I get a key-down event, immediately followed by a
> > key-up event. When releasing the key, I again get two events.
> >
> > Good (v5.15 or v5.16-rc1):
> >
> > Event: time 1637585631.288990, type 1 (EV_KEY), code 2 (KEY_1), value 1
> > Event: time 1637585631.288990, -------------- SYN_REPORT ------------
> > Event: time 1637585631.499924, type 1 (EV_KEY), code 2 (KEY_1), value 0
> > Event: time 1637585631.499924, -------------- SYN_REPORT ------------
> >
> > Bad (v5.16-rc1 + this patch):
> >
> > Event: time 1637585341.946647, type 1 (EV_KEY), code 2 (KEY_1), value 1
> > Event: time 1637585341.946647, -------------- SYN_REPORT ------------
> > Event: time 1637585341.960256, type 1 (EV_KEY), code 2 (KEY_1), value 0
> > Event: time 1637585341.960256, -------------- SYN_REPORT ------------
> > Event: time 1637585342.146775, type 1 (EV_KEY), code 2 (KEY_1), value 1
> > Event: time 1637585342.146775, -------------- SYN_REPORT ------------
> > Event: time 1637585342.160092, type 1 (EV_KEY), code 2 (KEY_1), value 0
> > Event: time 1637585342.160092, -------------- SYN_REPORT ------------
>
> Is there any chance you could trace whether rza1-irqc gets called at
> all when setting up and handling the interrupt?
I reran my tests ([A] pristine v5.15, [B] my current tree based on v5.16-rc1,
[C] my tree plus your patch).
[A] and [B] behave the same:
Boot:
rza1_irqc_translate:152: domain :soc:interrupt-controller@fcfef800
hwirq 3 type 3
rza1_irqc_alloc:115: domain :soc:interrupt-controller@fcfef800
virq 41 nr_irqs 1
rza1_irqc_alloc:127: param[0] = 0
rza1_irqc_alloc:127: param[1] = 3
rza1_irqc_alloc:127: param[2] = 4
rza1_irqc_translate:152: domain :soc:interrupt-controller@fcfef800
hwirq 2 type 3
rza1_irqc_alloc:115: domain :soc:interrupt-controller@fcfef800
virq 42 nr_irqs 1
rza1_irqc_alloc:127: param[0] = 0
rza1_irqc_alloc:127: param[1] = 2
rza1_irqc_alloc:127: param[2] = 4
rza1_irqc_translate:152: domain :soc:interrupt-controller@fcfef800
hwirq 5 type 3
rza1_irqc_alloc:115: domain :soc:interrupt-controller@fcfef800
virq 43 nr_irqs 1
rza1_irqc_alloc:127: param[0] = 0
rza1_irqc_alloc:127: param[1] = 5
rza1_irqc_alloc:127: param[2] = 4
rza1_irqc_set_type:76: hwirq 3 type 3
rza1_irqc_set_type:76: hwirq 2 type 3
rza1_irqc_set_type:76: hwirq 5 type 3
Pressing all 3 keys on RSK+RZA1:
rza1_irqc_eoi:62: hw_irq 3 IRQRR 0x8
rza1_irqc_eoi:62: hw_irq 3 IRQRR 0x8
rza1_irqc_eoi:62: hw_irq 2 IRQRR 0x4
rza1_irqc_eoi:62: hw_irq 2 IRQRR 0x4
rza1_irqc_eoi:62: hw_irq 5 IRQRR 0x20
rza1_irqc_eoi:62: hw_irq 5 IRQRR 0x20
/proc/interrupts:
41: 2 rza1-irqc 3 Edge SW1
42: 2 rza1-irqc 2 Edge SW2
43: 2 rza1-irqc 5 Edge SW3
evtest:
Event: time 1637597938.224621, type 1 (EV_KEY), code 2 (KEY_1), value 1
Event: time 1637597938.224621, -------------- SYN_REPORT ------------
Event: time 1637597938.232198, type 1 (EV_KEY), code 2 (KEY_1), value 0
Event: time 1637597938.232198, -------------- SYN_REPORT ------------
Event: time 1637597938.532939, type 1 (EV_KEY), code 2 (KEY_1), value 1
Event: time 1637597938.532939, -------------- SYN_REPORT ------------
Event: time 1637597938.542304, type 1 (EV_KEY), code 2 (KEY_1), value 0
Event: time 1637597938.542304, -------------- SYN_REPORT ------------
Event: time 1637597941.772467, type 1 (EV_KEY), code 3 (KEY_2), value 1
Event: time 1637597941.772467, -------------- SYN_REPORT ------------
Event: time 1637597941.782309, type 1 (EV_KEY), code 3 (KEY_2), value 0
Event: time 1637597941.782309, -------------- SYN_REPORT ------------
Event: time 1637597942.110321, type 1 (EV_KEY), code 3 (KEY_2), value 1
Event: time 1637597942.110321, -------------- SYN_REPORT ------------
Event: time 1637597942.122303, type 1 (EV_KEY), code 3 (KEY_2), value 0
Event: time 1637597942.122303, -------------- SYN_REPORT ------------
Event: time 1637597945.256109, type 1 (EV_KEY), code 4 (KEY_3), value 1
Event: time 1637597945.256109, -------------- SYN_REPORT ------------
Event: time 1637597945.262132, type 1 (EV_KEY), code 4 (KEY_3), value 0
Event: time 1637597945.262132, -------------- SYN_REPORT ------------
Event: time 1637597945.630469, type 1 (EV_KEY), code 4 (KEY_3), value 1
Event: time 1637597945.630469, -------------- SYN_REPORT ------------
Event: time 1637597945.642299, type 1 (EV_KEY), code 4 (KEY_3), value 0
Event: time 1637597945.642299, -------------- SYN_REPORT ------------
So despite seeing only 2 interrupts per key, gpio-keys generates
4 events per key.
With my v5.16-rc1-based tree, rza1_irqc_translate(), rza1_irqc_alloc(),
rza1_irqc_set_type(), and rza1_irqc_eoi() are indeed not called.
/proc/interrupts:
41: 242419 GIC-0 35 Level SW1
42: 142771 GIC-0 34 Level SW2
43: 136355 GIC-0 37 Level SW3
^^^^^^
Oops
evtest:
Event: time 1637598499.076306, type 1 (EV_KEY), code 2 (KEY_1), value 1
Event: time 1637598499.076306, -------------- SYN_REPORT ------------
Event: time 1637598499.350985, type 1 (EV_KEY), code 2 (KEY_1), value 0
Event: time 1637598499.350985, -------------- SYN_REPORT ------------
Event: time 1637598501.979770, type 1 (EV_KEY), code 3 (KEY_2), value 1
Event: time 1637598501.979770, -------------- SYN_REPORT ------------
Event: time 1637598502.370948, type 1 (EV_KEY), code 3 (KEY_2), value 0
Event: time 1637598502.370948, -------------- SYN_REPORT ------------
Event: time 1637598504.660146, type 1 (EV_KEY), code 4 (KEY_3), value 1
Event: time 1637598504.660146, -------------- SYN_REPORT ------------
Event: time 1637598505.030947, type 1 (EV_KEY), code 4 (KEY_3), value 0
Event: time 1637598505.030947, -------------- SYN_REPORT ------------
So despite receiving an interrupt storm, gpio-keys behaves as expected.
I will retest tomorrow with an old kernel, as I do not remember seeing such
behavior when I wrote the rza1-irqc driver.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds