On Tue, Nov 23, 2021 at 09:33:03AM +0800, zhuyinbo wrote:
在 2021/11/22 下午10:07, Andrew Lunn 写道:A PHY ID generally break up into 3 parts.
On Mon, Nov 22, 2021 at 08:14:57PM +0800, Yinbo Zhu wrote:
After module compilation, module alias mechanism will generate a ugly
mdio modules alias configure if ethernet phy was selected, this patch
is to fixup mdio alias garbled code.
In addition, that ugly alias configure will cause ethernet phy module
doens't match udev, phy module auto-load is fail, but add this patch
that it is well mdio driver alias configure match phy device uevent.
What PHY do you have problems with? What is the PHY id and which
driver should be loaded.
This code has existed a long time, so suddenly saying it is wrong and
changing it needs a good explanation why it is wrong. Being ugly is
not a good reason.
Andrew
Hi Andrew,
Use default mdio configure, After module compilation, mdio alias configure
is following and it doesn't match
the match phy dev(mdio dev) uevent, because the mdio alias configure
"0000000101000001000011111001????" include "?" and
The OUI of the manufacture.
The device.
The revision
The ? means these bits don't matter. Those correspond to the
revision. Generally, a driver can driver any revision of the PHY,
which is why those bits don't matter.
So when a driver probes with the id 00000001010000010000111110010110
we expect user space to find the best match, performing wildcard
expansion. So the ? will match anything.
Since this is worked for a long time, do you have an example where it
is broken? If so, which PHY driver? If it is broken, no driver is
loaded, or the wrong driver is loaded, i expect it is a bug in a
specific driver. And we should fix that bug in the specific driver.
Andrew