[PATCH] usb: storage: do not use UAS with Logitec LGB-4BNHUC

[Alexandre Courbot]

This 4-drives USB 3.1 bay gets unhappy when used with UAS:

	sd 10:0:0:0: [sdb] tag#18 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN
	sd 10:0:0:0: [sdb] tag#18 CDB: Read(16) 88 00 00 00 00 00 00 9d 42 30 00 00 04 00 00 00

It works perfectly fine as a regular mass-storage device, so prevent UAS
from being used with it.

Signed-off-by: Alexandre Courbot <gnurou@xxxxxxxxx>
---
 drivers/usb/storage/unusual_uas.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index b34b858d82a6..9ef09cabef50 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -52,6 +52,12 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
 
+UNUSUAL_DEV(0x0789, 0x0296, 0x0000, 0x9999,
+		"Logitec",
+		"LGB-4BNHUC",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 /*
  * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
  * commands in UAS mode.  Observed with the 1.28 firmware; are there others?
-- 
2.34.1