Re: [RFC PATCH v4 2/4] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Vinod Koul]

On 08-12-21, 19:54, Johan Jonker wrote:
> From: Yifeng Zhao <yifeng.zhao@xxxxxxxxxxxxxx>
> 
> Add the compatible strings for the Naneng combo PHY found on rockchip SoC.

Why is this series still tagged RFC..?

> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@xxxxxxxxxxxxxx>
> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
> ---
> 
> Changed V4:
>   restyle
>   remove some minItems
>   add more properties
>   remove reset-names
>   move #phy-cells
>   add rockchip,rk3568-pipe-grf
>   add rockchip,rk3568-pipe-phy-grf
> ---
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 127 ++++++++++++++++++
>  1 file changed, 127 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> new file mode 100644
> index 000000000..d309e2008
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> @@ -0,0 +1,127 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SoC Naneng Combo Phy Device Tree Bindings
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@xxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk3568-naneng-combphy
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: reference clock
> +      - description: apb clock
> +      - description: pipe clock

no maxItems or minItems for this?

> +
> +  clock-names:
> +    items:
> +      - const: ref
> +      - const: apb
> +      - const: pipe
> +
> +  resets:
> +    items:
> +      - description: exclusive apb reset line
> +      - description: exclusive PHY reset line

Ditto?

> +
> +  rockchip,dis-u3otg0-port:
> +    type: boolean
> +    description:
> +      Disable the u3otg0 port.

why not make it explicit and say rockchip,disable-u3otg0-port

Also why should this port be disabled?

> +
> +  rockchip,dis-u3otg1-port:
> +    type: boolean
> +    description:
> +      Disable the u3otg1 port.

ditto

> +
> +  rockchip,enable-ssc:
> +    type: boolean
> +    description:
> +      In U3 and SATA mode the SSC option is already disabled by default.
> +      In PCIE mode the option SSC can be enabled.
> +      If Spread Spectrum Clocking (SSC) is used it is
> +      required that a common reference clock is used by the link partners.
> +      Most commercially available platforms with PCIe backplanes use
> +      SSC to reduce EMI.
> +
> +  rockchip,ext-refclk:
> +    type: boolean
> +    description:
> +      Many PCIe connections, especially backplane connections,
> +      require a synchronous reference clock between the two link partners.
> +      To achieve this a common clock source, referred to as REFCLK in
> +      the PCI Express Card Electromechanical Specification,
> +      should be used by both ends of the PCIe link.
> +      The PCIe PHY provides 100MHz differential clock output
> +      (optional with SSC) in RC mode for system applications.
> +
> +  rockchip,pipe-grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Some additional phy settings are accessed through GRF regs.
> +
> +  rockchip,pipe-phy-grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Some additional pipe settings are accessed through GRF regs.
> +
> +  rockchip,sgmii-mac-sel:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +    default: 0
> +    description:
> +      Select gmac0 or gmac1 to be used as SGMII controller.
> +
> +  "#phy-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - resets
> +  - rockchip,pipe-grf
> +  - rockchip,pipe-phy-grf
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/rk3568-cru.h>
> +
> +    pipegrf: syscon@fdc50000 {
> +      compatible = "rockchip,rk3568-pipe-grf", "syscon";
> +      reg = <0xfdc50000 0x1000>;
> +    };
> +
> +    pipe_phy_grf0: syscon@fdc70000 {
> +      compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
> +      reg = <0xfdc70000 0x1000>;
> +    };
> +
> +    combphy0: phy@fe820000 {
> +      compatible = "rockchip,rk3568-naneng-combphy";
> +      reg = <0xfe820000 0x100>;
> +      clocks = <&pmucru CLK_PCIEPHY0_REF>,
> +               <&cru PCLK_PIPEPHY0>,
> +               <&cru PCLK_PIPE>;
> +      clock-names = "ref", "apb", "pipe";
> +      assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
> +      assigned-clock-rates = <100000000>;
> +      resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
> +      rockchip,pipe-grf = <&pipegrf>;
> +      rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
> +      #phy-cells = <1>;
> +    };
> -- 
> 2.20.1

-- 
~Vinod