Re: [GIT PULL] thermal for v5.17

[Rafael J. Wysocki]

On Thu, Dec 23, 2021 at 4:54 PM Daniel Lezcano
<daniel.lezcano@xxxxxxxxxx> wrote:
>
>
> Hi Rafael,
>
>
> The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
>
>   Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
>
> are available in the Git repository at:
>
>   https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v5.17-rc1
>
> for you to fetch changes up to 8ee1c0f6526ce942b7595951c7bb0165010051c2:
>
>   thermal/drivers/rz2gl: Add error check for reset_control_deassert()
> (2021-12-09 15:58:09 +0100)
>
> ----------------------------------------------------------------
> - Fix PM issue on the iMX driver when suspend/resume is happening by
>   implementing PM runtime support (Oleksij Rempel)
>
> - Add 'const' annotation to the thermal_cooling_ops in the Intel
>   powerclamp driver (Rikard Falkeborn)
>
> - Add TSU driver and bindings for the RZ/G2L platform (Biju Das)
>
> - Fix the missing ADC bit set on iMX8MP to enable the sensor (Paul
>   Gerber)
>
> - Fix missing check when calling reset_control_deassert() (Biju Das)
>
> ----------------------------------------------------------------
> Biju Das (3):
>       dt-bindings: thermal: Document Renesas RZ/G2L TSU
>       thermal/drivers: Add TSU driver for RZ/G2L
>       thermal/drivers/rz2gl: Add error check for reset_control_deassert()
>
> Oleksij Rempel (1):
>       thermal/drivers/imx: Implement runtime PM support
>
> Paul Gerber (1):
>       thermal/drivers/imx8mm: Enable ADC when enabling monitor
>
> Rikard Falkeborn (1):
>       thermal/drivers/intel_powerclamp: Constify static
> thermal_cooling_device_ops
>
>  .../devicetree/bindings/thermal/rzg2l-thermal.yaml |  76 +++++++
>  drivers/thermal/Kconfig                            |   9 +
>  drivers/thermal/Makefile                           |   1 +
>  drivers/thermal/imx8mm_thermal.c                   |   3 +
>  drivers/thermal/imx_thermal.c                      | 145 +++++++-----
>  drivers/thermal/intel/intel_powerclamp.c           |   2 +-
>  drivers/thermal/rzg2l_thermal.c                    | 242
> +++++++++++++++++++++
>  7 files changed, 423 insertions(+), 55 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
>  create mode 100644 drivers/thermal/rzg2l_thermal.c

Pulled and pushed out, thanks!