[PATCH 5/7] staging: r8188eu: remove unused fields from struct hal_data_8188e

[Michael Straube]

Remove unused fields from struct hal_data_8188e.

Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
 .../staging/r8188eu/include/rtl8188e_hal.h    | 30 -------------------
 1 file changed, 30 deletions(-)

diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index 40b3db34b8f2..2ce42d647a34 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -175,15 +175,9 @@ struct hal_data_8188e {
 
 	u16	BasicRateSet;
 
-	/*  EEPROM setting. */
-	u16	EEPROMSVID;
-	u16	EEPROMSDID;
 	u8	EEPROMRegulatory;
-
 	u8	EEPROMThermalMeter;
 
-	bool	EepromOrEfuse;
-
 	u8	Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	u8	Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	/* If only one tx, only BW20 and OFDM are used. */
@@ -192,11 +186,6 @@ struct hal_data_8188e {
 	s8	BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
 	s8	BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
 
-	u8	TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-	/*  For HT 40MHZ pwr */
-	u8	TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-	/*  For HT 40MHZ pwr */
-	u8	TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	/*  HT 20<->40 Pwr diff */
 	u8	TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	/*  For HT<->legacy pwr diff */
@@ -205,7 +194,6 @@ struct hal_data_8188e {
 	u8	PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	u8	PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 
-	u8	LegacyHTTxPowerDiff;/*  Legacy to HT rate power diff */
 	/*  The current Tx Power Level */
 	u8	CurrentCckTxPwrIdx;
 	u8	CurrentOfdm24GTxPwrIdx;
@@ -213,21 +201,12 @@ struct hal_data_8188e {
 	u8	CurrentBW4024GTxPwrIdx;
 
 	/*  Read/write are allow for following hardware information variables */
-	u8	framesync;
-	u32	framesyncC34;
-	u8	framesyncMonitor;
-	u8	DefaultInitialGain[4];
 	u8	pwrGroupCnt;
 	u32	MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
-	u32	CCKTxPowerLevelOriginalOffset;
 
 	u8	CrystalCap;
-	u32	AntennaTxPath;			/*  Antenna path Tx */
-	u32	AntennaRxPath;			/*  Antenna path Rx */
 	u8	ExternalPA;
 
-	u8	b1x1RecvCombine;	/*  for 1T1R receive combining */
-
 	u32	AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
 
 	struct bb_reg_def PHYRegDef[2];	/* Radio A/B */
@@ -254,17 +233,9 @@ struct hal_data_8188e {
 	u8	FwRsvdPageStartOffset; /* Reserve page start offset except
 					*  beacon in TxQ. */
 
-	/*  2010/08/09 MH Add CU power down mode. */
-	bool		pwrdown;
-
 	u8	OutEpQueueSel;
 	u8	OutEpNumber;
 
-	/*  2010/11/22 MH Add for slim combo debug mode selective. */
-	/*  This is used for fix the drawback of CU TSMC-A/UMC-A cut.
-	 * HW auto suspend ability. Close BT clock. */
-	bool		SlimComboDbg;
-
 	u16	EfuseUsedBytes;
 
 	struct P2P_PS_Offload_t	p2p_ps_offload;
@@ -280,7 +251,6 @@ struct hal_data_8188e {
 	u8	C2hArray[16];
 	u8	UsbTxAggMode;
 	u8	UsbTxAggDescNum;
-	u32	MaxUsbRxAggBlock;
 
 	enum usb_rx_agg_mode UsbRxAggMode;
 	u8	UsbRxAggBlockCount;	/*  USB Block count. Block size is
-- 
2.34.1