Re: [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor

[Martin Kepplinger]

Am Mittwoch, dem 05.01.2022 um 10:23 -0600 schrieb Rob Herring:
> On Fri, Dec 3, 2021 at 10:19 AM Rob Herring <robh@xxxxxxxxxx> wrote:
> > 
> > On Mon, Sep 6, 2021 at 5:29 AM Martin Kepplinger
> > <martin.kepplinger@xxxxxxx> wrote:
> > > 
> > > Document the bindings used for the SK Hynix Hi-846 CMOS camera
> > > driver.
> > > 
> > > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > > ---
> > >  .../bindings/media/i2c/hynix,hi846.yaml       | 120
> > > ++++++++++++++++++
> > >  1 file changed, 120 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > > 
> > > diff --git
> > > a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > > new file mode 100644
> > > index 000000000000..85a8877c2f38
> > > --- /dev/null
> > > +++
> > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > > @@ -0,0 +1,120 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
> > > +
> > > +maintainers:
> > > +  - Martin Kepplinger <martin.kepplinger@xxxxxxx>
> > > +
> > > +description: |-
> > > +  The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
> > > +  interface and CCI (I2C compatible) control bus. The output
> > > format
> > > +  is raw Bayer.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: hynix,hi846
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: Reference to the mclk clock.
> > > +
> > > +  assigned-clocks:
> > > +    maxItems: 1
> > > +
> > > +  assigned-clock-rates:
> > > +    maxItems: 1
> > > +
> > > +  reset-gpios:
> > > +    description: Reference to the GPIO connected to the RESETB
> > > pin. Active low.
> > > +    maxItems: 1
> > > +
> > > +  shutdown-gpios:
> > > +    description: Reference to the GPIO connected to the
> > > XSHUTDOWN pin. Active low.
> > > +    maxItems: 1
> > > +
> > > +  vddio-supply:
> > > +    description: Definition of the regulator used for the VDDIO
> > > power supply.
> > > +
> > > +  vdda-supply:
> > > +    description: Definition of the regulator used for the VDDA
> > > power supply.
> > > +
> > > +  vddd-supply:
> > > +    description: Definition of the regulator used for the VDDD
> > > power supply.
> > > +
> > > +  port:
> > > +    $ref: /schemas/graph.yaml#/properties/port
> > 
> > This needs to be:
> > 
> > $ref: /schemas/graph.yaml#/$defs/port-base
> > 
> > to fix the warning reported. You have to use the 'main' branch of
> > dtschema which has unevaluatedProperties support. I'll be making a
> > release soonish.
> 
> This is still failing, can you please fix it.
> 
> Rob

Yes I'll send a patch next week. thanks for the reminder,

                           martin