Re: [WIP PATCH] dt-bindings: display: msm: dsi-controller-main: distinguish DSI versions

From: Dmitry Baryshkov
Date: Sat Jan 08 2022 - 14:47:28 EST

Next message: Lukas Wunner: "Re: spi: stm32-qspi: Update spi registering"
Previous message: kernel test robot: "[mingo-tip:master 2130/2300] drivers/net/fddi/defza.c:104:16: error: implicit declaration of function '__netdev_alloc_skb'"
In reply to: David Heidelberg: "[WIP PATCH] dt-bindings: display: msm: dsi-controller-main: distinguish DSI versions"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sat, 8 Jan 2022 at 22:01, David Heidelberg <david@xxxxxxx> wrote:
>
> Update documentation compatible and checking to comprehend
> both V2 and 6G version bindings.
>
> Following this commit, there will be update for
> compatible string in chipsets dtsi.
>
> Additional changes:
> - switch to unevaluatedProperties
>
> Signed-off-by: David Heidelberg <david@xxxxxxx>
> ---
> Rob, I know you mentioned using rather chipset names, but since
> meanwhile I coded this, I'll let you decide if should make sense to
> change it or keep it this way.
>
> .../display/msm/dsi-controller-main.yaml | 271 +++++++++++++++---
> 1 file changed, 230 insertions(+), 41 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> index 35426fde8610..8eb41952c2a7 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> @@ -11,11 +11,227 @@ maintainers:
>
> allOf:
> - $ref: "../dsi-controller.yaml#"
> + # V2 and 6G definition:
> + - if:
> + properties:
> + compatible:
> + contains:
> + pattern: '^qcom,dsi-ctrl-v2-[a-z0-9]+$'
> + then:
> + properties:
> + clocks:
> + minItems: 7
> + maxItems: 7
> +
> + clock-names:
> + items:
> + - const: iface # from dsi_v2_bus_clk_names
> + - const: bus
> + - const: core_mmss
> + - const: src # from dsi_clk_init_v2
> + - const: byte # from dsi_clk_init
> + - const: pixel
> + - const: core
> +
> + assigned-clocks:
> + minItems: 4
> + maxItems: 4
> + description: >
> + Parents of "byte", "esc", "src" and "pixel" for the given platform.
> +
> + assigned-clock-parents:
> + minItems: 4
> + maxItems: 4
> + description: >
> + The Byte, Escape, Source and Pixel clock PLL outputs provided by a DSI PHY block.
> +
> + syscon-sfpb:
> + description: A phandle to mmss_sfpb syscon node.
> + $ref: "/schemas/types.yaml#/definitions/phandle"
> +
> + avdd-supply:
> + description: 3.0 V supply
> +
> + vdda-supply:
> + description: 1.2 V supply
> +
> + vddio-supply:
> + description: 1.8 V supply
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + pattern: '^qcom,dsi-ctrl-6g-v[0-9.]+$'
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Display byte clock
> + - description: Display byte interface clock
> + - description: Display pixel clock
> + - description: Display escape clock
> + - description: Display AHB clock
> + - description: Display AXI clock
> +
> + clock-names:
> + items:
> + - const: byte
> + - const: byte_intf
> + - const: pixel
> + - const: core
> + - const: iface
> + - const: bus
> +
> + assigned-clocks:
> + minItems: 2
> + maxItems: 2
> + description: >
> + Parents of "byte" and "pixel" for the given platform.
> +
> + assigned-clock-parents:
> + minItems: 2
> + maxItems: 2
> + description: >
> + The Byte and Pixel clock PLL outputs provided by a DSI PHY block.
> +
> + required:
> + - power-domains
> + - operating-points-v2
> +
> + # Specific 6G revisions:
> + - if:
> + properties:
> + compatible:
> + contains:
> + pattern: '^qcom,dsi-ctrl-6g-v1.[0-2].[0-9.]+$'
> + then:
> + properties:
> + vdd-supply:
> + description: 3.0 V supply
> +
> + vdda-supply:
> + description: 1.2 V supply
> +
> + vddio-supply:
> + description: 1.8 V supply
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,dsi-ctrl-6g-v1.3.0
> + then:
> + properties:
> + vcca-supply:
> + description: 1.0 V supply
> +
> + vdd-supply:
> + description: 1.8 V supply
> +
> + vdda-supply:
> + description: 1.25 V supply
> +
> + vddio-supply:
> + description: 1.8 V supply
> +
> + patternProperties:
> + '^(lib_reg|ibb_reg)-supply$': true
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,dsi-ctrl-6g-v1.3.1
> + then:
> + properties:
> + vdda-supply:
> + description: 1.2 V supply
> +
> + vddio-supply:
> + description: 1.8 V supply
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,dsi-ctrl-6g-v1.4.1
> + then:
> + properties:
> + vcca-supply:
> + description: 0.925 V supply
> +
> + vdda-supply:
> + description: 1.25 V supply
> +
> + vddio-supply:
> + description: 1.8 V supply
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,dsi-ctrl-6g-v1.4.2
> + then:
> + properties:
> + vdda-supply:
> + description: 1.2 V supply
> +
> + vddio-supply: true
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,dsi-ctrl-6g-v2.2.0
> + then:
> + properties:
> + vdd-supply: true
> +
> + vdda-supply:
> + description: 1.2 V supply
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,dsi-ctrl-6g-v2.1.0
> + - qcom,dsi-ctrl-6g-v2.2.1
> + - qcom,dsi-ctrl-6g-v2.3.0
> + - qcom,dsi-ctrl-6g-v2.4.0
> + - qcom,dsi-ctrl-6g-v2.4.1
> + - qcom,dsi-ctrl-6g-v2.5.0
> + then:
> + properties:
> + vdda-supply:
> + description: 1.2 V supply
>
> properties:
> compatible:
> - items:
> + oneOf:
> + - items:
> + - enum:
> + - qcom,dsi-ctrl-v2-apq8064
> + - qcom,dsi-ctrl-6g-v1.0.0
> + - qcom,dsi-ctrl-6g-v1.1.0
> + - qcom,dsi-ctrl-6g-v1.1.1
> + - qcom,dsi-ctrl-6g-v1.2.0
> + - qcom,dsi-ctrl-6g-v1.3.0
> + - qcom,dsi-ctrl-6g-v1.3.1
> + - qcom,dsi-ctrl-6g-v1.4.1
> + - qcom,dsi-ctrl-6g-v1.4.2
> + - qcom,dsi-ctrl-6g-v2.1.0
> + - qcom,dsi-ctrl-6g-v2.2.0
> + - qcom,dsi-ctrl-6g-v2.2.1
> + - qcom,dsi-ctrl-6g-v2.3.0
> + - qcom,dsi-ctrl-6g-v2.4.0
> + - qcom,dsi-ctrl-6g-v2.4.1
> + - qcom,dsi-ctrl-6g-v2.5.0
> + - const: qcom,mdss-dsi-ctrl
> +
> - const: qcom,mdss-dsi-ctrl
> + deprecated: true

I'd suggest to list all other attributes after the 'compatible' , if
that's possible. In my opinion, It's nice to know which compatibles
are available, before actually checking which properties to define.

>
> reg:
> maxItems: 1
> @@ -26,23 +242,13 @@ properties:
> interrupts:
> maxItems: 1
>
> - clocks:
> - items:
> - - description: Display byte clock
> - - description: Display byte interface clock
> - - description: Display pixel clock
> - - description: Display escape clock
> - - description: Display AHB clock
> - - description: Display AXI clock
> -
> - clock-names:
> - items:
> - - const: byte
> - - const: byte_intf
> - - const: pixel
> - - const: core
> - - const: iface
> - - const: bus
> + clocks: true
> +
> + clock-names: true
> +
> + assigned-clocks: true
> +
> + assigned-clock-parents: true
>
> phys:
> maxItems: 1
> @@ -54,28 +260,12 @@ properties:
>
> "#size-cells": true
>
> - syscon-sfpb:
> - description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> -
> qcom,dual-dsi-mode:
> type: boolean
> - description: |
> + description: >
> Indicates if the DSI controller is driving a panel which needs
> 2 DSI links.
>
> - assigned-clocks:
> - minItems: 2
> - maxItems: 2
> - description: |
> - Parents of "byte" and "pixel" for the given platform.
> -
> - assigned-clock-parents:
> - minItems: 2
> - maxItems: 2
> - description: |
> - The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
> -
> power-domains:
> maxItems: 1
>
> @@ -102,7 +292,7 @@ properties:
> maxItems: 4
> minItems: 4
> items:
> - enum: [ 0, 1, 2, 3 ]
> + enum: [0, 1, 2, 3]
>
> port@1:
> $ref: "/schemas/graph.yaml#/$defs/port-base"
> @@ -118,7 +308,7 @@ properties:
> maxItems: 4
> minItems: 4
> items:
> - enum: [ 0, 1, 2, 3 ]
> + enum: [0, 1, 2, 3]
>
> required:
> - port@0
> @@ -135,11 +325,9 @@ required:
> - phy-names
> - assigned-clocks
> - assigned-clock-parents
> - - power-domains
> - - operating-points-v2
> - ports
>
> -additionalProperties: false
> +unevaluatedProperties: false
>
> examples:
> - |
> @@ -175,7 +363,8 @@ examples:
> phys = <&dsi0_phy>;
> phy-names = "dsi";
>
> - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
>
> power-domains = <&rpmhpd SC7180_CX>;
> --
> 2.34.1
>

--
With best wishes
Dmitry

Next message: Lukas Wunner: "Re: spi: stm32-qspi: Update spi registering"
Previous message: kernel test robot: "[mingo-tip:master 2130/2300] drivers/net/fddi/defza.c:104:16: error: implicit declaration of function '__netdev_alloc_skb'"
In reply to: David Heidelberg: "[WIP PATCH] dt-bindings: display: msm: dsi-controller-main: distinguish DSI versions"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]