[PATCH v12 14/16] iio: afe: rescale: add temperature transducers

From: Liam Beguin
Date: Sat Jan 08 2022 - 15:54:27 EST


A temperature transducer is a device that converts a thermal quantity
into any other physical quantity. This patch adds support for
temperature to voltage (like the LTC2997) and temperature to current
(like the AD590) linear transducers.
In both cases these are assumed to be connected to a voltage ADC.

Signed-off-by: Liam Beguin <liambeguin@xxxxxxxxx>
Reviewed-by: Peter Rosin <peda@xxxxxxxxxx>
---
drivers/iio/afe/iio-rescale.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index 12c5e8d0d25c..4d70b72f59a5 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -435,11 +435,37 @@ static int rescale_temp_sense_rtd_props(struct device *dev,
return 0;
}

+static int rescale_temp_transducer_props(struct device *dev,
+ struct rescale *rescale)
+{
+ s32 offset = 0;
+ s32 sense = 1;
+ s32 alpha;
+ int ret;
+
+ device_property_read_u32(dev, "sense-offset-millicelsius", &offset);
+ device_property_read_u32(dev, "sense-resistor-ohms", &sense);
+ ret = device_property_read_u32(dev, "alpha-ppm-per-celsius", &alpha);
+ if (ret) {
+ dev_err(dev, "failed to read alpha-ppm-per-celsius: %d\n", ret);
+ return ret;
+ }
+
+ rescale->numerator = MEGA;
+ rescale->denominator = alpha * sense;
+
+ rescale->offset = div_s64((s64)offset * rescale->denominator,
+ rescale->numerator);
+
+ return 0;
+}
+
enum rescale_variant {
CURRENT_SENSE_AMPLIFIER,
CURRENT_SENSE_SHUNT,
VOLTAGE_DIVIDER,
TEMP_SENSE_RTD,
+ TEMP_TRANSDUCER,
};

static const struct rescale_cfg rescale_cfg[] = {
@@ -459,6 +485,10 @@ static const struct rescale_cfg rescale_cfg[] = {
.type = IIO_TEMP,
.props = rescale_temp_sense_rtd_props,
},
+ [TEMP_TRANSDUCER] = {
+ .type = IIO_TEMP,
+ .props = rescale_temp_transducer_props,
+ },
};

static const struct of_device_id rescale_match[] = {
@@ -470,6 +500,8 @@ static const struct of_device_id rescale_match[] = {
.data = &rescale_cfg[VOLTAGE_DIVIDER], },
{ .compatible = "temperature-sense-rtd",
.data = &rescale_cfg[TEMP_SENSE_RTD], },
+ { .compatible = "temperature-transducer",
+ .data = &rescale_cfg[TEMP_TRANSDUCER], },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, rescale_match);
--
2.34.0