[PATCH 5.15 43/72] reset: renesas: Fix Runtime PM usage

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@xxxxxxxxx>

commit 92c959bae2e54ba1e2540ba5f813f7752bd76be1 upstream.

If pm_runtime_resume_and_get() fails then it returns w/o the RPM usage
counter being incremented. In this case call pm_runtime_put() in
remove() will result in a usage counter imbalance. Therefore check the
return code of pm_runtime_resume_and_get() and bail out in case of error.

Fixes: bee08559701f ("reset: renesas: Add RZ/G2L usbphy control driver")
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/ec24e13f-0530-b091-7a08-864577b9b3be@xxxxxxxxx
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/reset/reset-rzg2l-usbphy-ctrl.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -137,7 +137,12 @@ static int rzg2l_usbphy_ctrl_probe(struc
 	dev_set_drvdata(dev, priv);
 
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_resume_and_get(&pdev->dev);
+	error = pm_runtime_resume_and_get(&pdev->dev);
+	if (error < 0) {
+		pm_runtime_disable(&pdev->dev);
+		reset_control_assert(priv->rstc);
+		return dev_err_probe(&pdev->dev, error, "pm_runtime_resume_and_get failed");
+	}
 
 	/* put pll and phy into reset state */
 	spin_lock_irqsave(&priv->lock, flags);