Re: [PATCH v3 2/2] phy: amlogic: Add G12A Analog MIPI D-PHY driver

[Neil Armstrong]

Hi,

On 07/01/2022 23:09, Martin Blumenstingl wrote:
> Hi Neil,
> 
> On Fri, Jan 7, 2022 at 4:06 PM Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
> [...]
>> +#define HHI_MIPI_CNTL2 0x08
>> +#define                HHI_MIPI_CNTL2_DIF_TX_CTL1      GENMASK(31, 16)
>> +#define                HHI_MIPI_CNTL2_CH_EN            GENMASK(15, 11)
>> +#define                HHI_MIPI_CNTL2_DIF_TX_CTL0      GENMASK(10, 0)
>> +
>> +#define DSI_LANE_0                             BIT(4)
>> +#define DSI_LANE_1                             BIT(3)
>> +#define DSI_LANE_CLK                           BIT(2)
>> +#define DSI_LANE_2                             BIT(1)
>> +#define DSI_LANE_3                             BIT(0)
> At first I thought that these should be named
> HHI_MIPI_CNTL2_DSI_LANE_0 (and similar).
> But then I understood that they aren't bits directly in HHI_MIPI_CNTL2
> but they belong to HHI_MIPI_CNTL2_CH_EN.
> Have you considered naming them for example
> HHI_MIPI_CNTL2_CH_EN_DSI_LANE_0 to make this more clear?
> 
> [...]
>> +       if (IS_ERR(map)) {
>> +               dev_err(dev,
>> +                       "failed to get HHI regmap\n");
>> +               return PTR_ERR(map);
> I suggest using:
>   return dev_err_probe(dev, PTR_ERR(map), "failed to get HHI regmap\n");
> to simplify the code
> 
> [...]
>> +       if (IS_ERR(priv->phy)) {
>> +               ret = PTR_ERR(priv->phy);
>> +               if (ret != -EPROBE_DEFER)
>> +                       dev_err(dev, "failed to create PHY\n");
>> +               return ret;
> and similar here:
>   return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n");
> 
> [...]
>> +static const struct of_device_id phy_g12a_mipi_dphy_analog_of_match[] = {
>> +       {
>> +               .compatible = "amlogic,g12a-mipi-dphy-analog",
>> +       },
>> +       { },
> In the past I was suggested to use:
>   { /* sentinel */ }
> meaning: no trailing comma here so nobody can add entries after the
> sentinel by accident.
> I suggest doing the same here if you re-spin this series.

Yep, will do the changes,

Thanks,
Neil

> 
> 
> Thank you!
> Martin
>