Re: [PATCH 01/10] dt-bindings: devfreq: rk3399_dmc: Convert to YAML

From: Rob Herring
Date: Mon Jan 10 2022 - 12:16:54 EST

Next message: Alexander Aring: "Re: [net-next 12/18] net: mac802154: Handle scan requests"
Previous message: Michal Hocko: "Re: [PATCH v2 1/1] mm/vmscan.c: Prevent allocating shrinker_info on offlined nodes"
In reply to: Rob Herring: "Re: [PATCH 01/10] dt-bindings: devfreq: rk3399_dmc: Convert to YAML"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Jan 07, 2022 at 03:53:11PM -0800, Brian Norris wrote:
> I want to add, deprecate, and bugfix some properties, as well as add the
> first users. This is easier with a proper schema.
>
> The transformation is mostly straightforward, plus a few notable tweaks:
>
> * Renamed rockchip,dram_speed_bin to rockchip,ddr3_speed_bin. The
> driver code and the example matched, but the description was
> different. I went with the implementation.
>
> * Drop upthreshold and downdifferential properties from the example.
> These were undocumented (so, wouldn't pass validation), but were
> representing software properties (governor tweaks). I drop them from
> the driver in subsequent patches.
>
> * Rename clock from pclk_ddr_mon to dmc_clk. The driver, DT example,
> and all downstream users matched -- the binding definition was the
> exception. Anyway, "dmc_clk" is a more appropriately generic name.

generic is not really better, but okay.

>
> Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> ---
>
> .../bindings/devfreq/rk3399_dmc.txt | 212 -------------
> .../bindings/devfreq/rk3399_dmc.yaml | 297 ++++++++++++++++++
> 2 files changed, 297 insertions(+), 212 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml
>
> diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> deleted file mode 100644
> index 58fc8a6cebc7..000000000000
> --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> +++ /dev/null
> @@ -1,212 +0,0 @@
> -* Rockchip rk3399 DMC (Dynamic Memory Controller) device
> -
> -Required properties:
> -- compatible: Must be "rockchip,rk3399-dmc".
> -- devfreq-events: Node to get DDR loading, Refer to
> - Documentation/devicetree/bindings/devfreq/event/
> - rockchip-dfi.txt
> -- clocks: Phandles for clock specified in "clock-names" property
> -- clock-names : The name of clock used by the DFI, must be
> - "pclk_ddr_mon";
> -- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
> - for details.
> -- center-supply: DMC supply node.
> -- status: Marks the node enabled/disabled.
> -- rockchip,pmu: Phandle to the syscon managing the "PMU general register
> - files".
> -
> -Optional properties:
> -- interrupts: The CPU interrupt number. The interrupt specifier
> - format depends on the interrupt controller.
> - It should be a DCF interrupt. When DDR DVFS finishes
> - a DCF interrupt is triggered.
> -- rockchip,pmu: Phandle to the syscon managing the "PMU general register
> - files".
> -
> -Following properties relate to DDR timing:
> -
> -- rockchip,dram_speed_bin : Value reference include/dt-bindings/clock/rk3399-ddr.h,
> - it selects the DDR3 cl-trp-trcd type. It must be
> - set according to "Speed Bin" in DDR3 datasheet,
> - DO NOT use a smaller "Speed Bin" than specified
> - for the DDR3 being used.
> -
> -- rockchip,pd_idle : Configure the PD_IDLE value. Defines the
> - power-down idle period in which memories are
> - placed into power-down mode if bus is idle
> - for PD_IDLE DFI clock cycles.
> -
> -- rockchip,sr_idle : Configure the SR_IDLE value. Defines the
> - self-refresh idle period in which memories are
> - placed into self-refresh mode if bus is idle
> - for SR_IDLE * 1024 DFI clock cycles (DFI
> - clocks freq is half of DRAM clock), default
> - value is "0".
> -
> -- rockchip,sr_mc_gate_idle : Defines the memory self-refresh and controller
> - clock gating idle period. Memories are placed
> - into self-refresh mode and memory controller
> - clock arg gating started if bus is idle for
> - sr_mc_gate_idle*1024 DFI clock cycles.
> -
> -- rockchip,srpd_lite_idle : Defines the self-refresh power down idle
> - period in which memories are placed into
> - self-refresh power down mode if bus is idle
> - for srpd_lite_idle * 1024 DFI clock cycles.
> - This parameter is for LPDDR4 only.
> -
> -- rockchip,standby_idle : Defines the standby idle period in which
> - memories are placed into self-refresh mode.
> - The controller, pi, PHY and DRAM clock will
> - be gated if bus is idle for standby_idle * DFI
> - clock cycles.
> -
> -- rockchip,dram_dll_dis_freq : Defines the DDR3 DLL bypass frequency in MHz.
> - When DDR frequency is less than DRAM_DLL_DISB_FREQ,
> - DDR3 DLL will be bypassed. Note: if DLL was bypassed,
> - the odt will also stop working.
> -
> -- rockchip,phy_dll_dis_freq : Defines the PHY dll bypass frequency in
> - MHz (Mega Hz). When DDR frequency is less than
> - DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
> - Note: PHY DLL and PHY ODT are independent.
> -
> -- rockchip,ddr3_odt_dis_freq : When the DRAM type is DDR3, this parameter defines
> - the ODT disable frequency in MHz (Mega Hz).
> - when the DDR frequency is less then ddr3_odt_dis_freq,
> - the ODT on the DRAM side and controller side are
> - both disabled.
> -
> -- rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines
> - the DRAM side driver strength in ohms. Default
> - value is 40.
> -
> -- rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines
> - the DRAM side ODT strength in ohms. Default value
> - is 120.
> -
> -- rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines
> - the phy side CA line (incluing command line,
> - address line and clock line) driver strength.
> - Default value is 40.
> -
> -- rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines
> - the PHY side DQ line (including DQS/DQ/DM line)
> - driver strength. Default value is 40.
> -
> -- rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines
> - the PHY side ODT strength. Default value is 240.
> -
> -- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
> - then ODT disable frequency in MHz (Mega Hz).
> - When DDR frequency is less then ddr3_odt_dis_freq,
> - the ODT on the DRAM side and controller side are
> - both disabled.
> -
> -- rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines
> - the DRAM side driver strength in ohms. Default
> - value is 34.
> -
> -- rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines
> - the DRAM side ODT strength in ohms. Default value
> - is 240.
> -
> -- rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines
> - the PHY side CA line (including command line,
> - address line and clock line) driver strength.
> - Default value is 40.
> -
> -- rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines
> - the PHY side DQ line (including DQS/DQ/DM line)
> - driver strength. Default value is 40.
> -
> -- rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define
> - the phy side odt strength, default value is 240.
> -
> -- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
> - defines the ODT disable frequency in
> - MHz (Mega Hz). When the DDR frequency is less then
> - ddr3_odt_dis_freq, the ODT on the DRAM side and
> - controller side are both disabled.
> -
> -- rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines
> - the DRAM side driver strength in ohms. Default
> - value is 60.
> -
> -- rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines
> - the DRAM side ODT on DQS/DQ line strength in ohms.
> - Default value is 40.
> -
> -- rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines
> - the DRAM side ODT on CA line strength in ohms.
> - Default value is 40.
> -
> -- rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines
> - the PHY side CA line (including command address
> - line) driver strength. Default value is 40.
> -
> -- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
> - the PHY side clock line and CS line driver
> - strength. Default value is 80.
> -
> -- rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines
> - the PHY side DQ line (including DQS/DQ/DM line)
> - driver strength. Default value is 80.
> -
> -- rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines
> - the PHY side ODT strength. Default value is 60.
> -
> -Example:
> - dmc_opp_table: dmc_opp_table {
> - compatible = "operating-points-v2";
> -
> - opp00 {
> - opp-hz = /bits/ 64 <300000000>;
> - opp-microvolt = <900000>;
> - };
> - opp01 {
> - opp-hz = /bits/ 64 <666000000>;
> - opp-microvolt = <900000>;
> - };
> - };
> -
> - dmc: dmc {
> - compatible = "rockchip,rk3399-dmc";
> - devfreq-events = <&dfi>;
> - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_DDRC>;
> - clock-names = "dmc_clk";
> - operating-points-v2 = <&dmc_opp_table>;
> - center-supply = <&ppvar_centerlogic>;
> - upthreshold = <15>;
> - downdifferential = <10>;
> - rockchip,ddr3_speed_bin = <21>;
> - rockchip,pd_idle = <0x40>;
> - rockchip,sr_idle = <0x2>;
> - rockchip,sr_mc_gate_idle = <0x3>;
> - rockchip,srpd_lite_idle = <0x4>;
> - rockchip,standby_idle = <0x2000>;
> - rockchip,dram_dll_dis_freq = <300>;
> - rockchip,phy_dll_dis_freq = <125>;
> - rockchip,auto_pd_dis_freq = <666>;
> - rockchip,ddr3_odt_dis_freq = <333>;
> - rockchip,ddr3_drv = <40>;
> - rockchip,ddr3_odt = <120>;
> - rockchip,phy_ddr3_ca_drv = <40>;
> - rockchip,phy_ddr3_dq_drv = <40>;
> - rockchip,phy_ddr3_odt = <240>;
> - rockchip,lpddr3_odt_dis_freq = <333>;
> - rockchip,lpddr3_drv = <34>;
> - rockchip,lpddr3_odt = <240>;
> - rockchip,phy_lpddr3_ca_drv = <40>;
> - rockchip,phy_lpddr3_dq_drv = <40>;
> - rockchip,phy_lpddr3_odt = <240>;
> - rockchip,lpddr4_odt_dis_freq = <333>;
> - rockchip,lpddr4_drv = <60>;
> - rockchip,lpddr4_dq_odt = <40>;
> - rockchip,lpddr4_ca_odt = <40>;
> - rockchip,phy_lpddr4_ca_drv = <40>;
> - rockchip,phy_lpddr4_ck_cs_drv = <80>;
> - rockchip,phy_lpddr4_dq_drv = <80>;
> - rockchip,phy_lpddr4_odt = <60>;
> - };
> diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml
> new file mode 100644
> index 000000000000..f12f34d93378
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml
> @@ -0,0 +1,297 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# %YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/devfreq/rk3399_dmc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip rk3399 DMC (Dynamic Memory Controller) device
> +
> +maintainers:
> + - Brian Norris <briannorris@xxxxxxxxxxxx>
> +
> +required:

'required' normally goes after properties.

> + - compatible
> + - devfreq-events
> + - clocks
> + - clock-names
> + - operating-points-v2
> + - center-supply
> +
> +properties:
> + compatible:
> + enum:
> + - rockchip,rk3399-dmc
> +
> + devfreq-events:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + minItems: 1
> + description:
> + Node to get DDR loading. Refer to
> + Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt.
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: dmc_clk
> +
> + operating-points-v2:
> + description:
> + Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml for details.

Drop generic, free form references. Just 'true' is fine here.

> +
> + center-supply:
> + description:
> + DMC regulator supply.
> +
> + rockchip,pmu:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1

'phandle' is already a single item. Drop.

> + description:
> + Phandle to the syscon managing the "PMU general register files".
> +
> + interrupts:
> + maxItems: 1
> + description:
> + The CPU interrupt number. The interrupt specifier format depends on the
> + interrupt controller. It should be a DCF interrupt. When DDR DVFS
> + finishes a DCF interrupt is triggered.

You can drop 'The interrupt specifier format depends on the interrupt
controller'.

> +
> + rockchip,ddr3_speed_bin:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the
> + DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3
> + datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3
> + being used.
> +
> + rockchip,pd_idle:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Configure the PD_IDLE value. Defines the power-down idle period in which
> + memories are placed into power-down mode if bus is idle for PD_IDLE DFI
> + clock cycles.
> +
> + rockchip,sr_idle:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Configure the SR_IDLE value. Defines the self-refresh idle period in
> + which memories are placed into self-refresh mode if bus is idle for
> + SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock),
> + default value is "0".
> +
> + rockchip,sr_mc_gate_idle:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Defines the memory self-refresh and controller clock gating idle period.
> + Memories are placed into self-refresh mode and memory controller clock
> + arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
> + cycles.
> +
> + rockchip,srpd_lite_idle:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Defines the self-refresh power down idle period in which memories are
> + placed into self-refresh power down mode if bus is idle for
> + srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
> + only.
> +
> + rockchip,standby_idle:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Defines the standby idle period in which memories are placed into
> + self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
> + if bus is idle for standby_idle * DFI clock cycles.
> +
> + rockchip,dram_dll_dis_freq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less
> + than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed.
> + Note: if DLL was bypassed, the odt will also stop working.
> +
> + rockchip,phy_dll_dis_freq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency
> + is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
> + Note: PHY DLL and PHY ODT are independent.
> +
> + rockchip,auto_pd_dis_freq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Defines the auto PD disable frequency in MHz.
> +
> + rockchip,ddr3_odt_dis_freq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is DDR3, this parameter defines the ODT disable
> + frequency in MHz (Mega Hz). When the DDR frequency is less then
> + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both
> + disabled.
> +
> + rockchip,ddr3_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is DDR3, this parameter defines the DRAM side drive
> + strength in ohms. Default value is 40.
> +
> + rockchip,ddr3_odt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is DDR3, this parameter defines the DRAM side ODT
> + strength in ohms. Default value is 120.
> +
> + rockchip,phy_ddr3_ca_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is DDR3, this parameter defines the phy side CA line
> + (incluing command line, address line and clock line) drive strength.
> + Default value is 40.
> +
> + rockchip,phy_ddr3_dq_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is DDR3, this parameter defines the PHY side DQ line
> + (including DQS/DQ/DM line) drive strength. Default value is 40.
> +
> + rockchip,phy_ddr3_odt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is DDR3, this parameter defines the PHY side ODT
> + strength. Default value is 240.
> +
> + rockchip,lpddr3_odt_dis_freq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR3, this parameter defines then ODT disable
> + frequency in MHz (Mega Hz). When DDR frequency is less then
> + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both
> + disabled.
> +
> + rockchip,lpddr3_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR3, this parameter defines the DRAM side drive
> + strength in ohms. Default value is 34.
> +
> + rockchip,lpddr3_odt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT
> + strength in ohms. Default value is 240.
> +
> + rockchip,phy_lpddr3_ca_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR3, this parameter defines the PHY side CA line
> + (including command line, address line and clock line) drive strength.
> + Default value is 40.
> +
> + rockchip,phy_lpddr3_dq_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line
> + (including DQS/DQ/DM line) drive strength. Default value is 40.
> +
> + rockchip,phy_lpddr3_odt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When dram type is LPDDR3, this parameter define the phy side odt
> + strength, default value is 240.
> +
> + rockchip,lpddr4_odt_dis_freq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR4, this parameter defines the ODT disable
> + frequency in MHz (Mega Hz). When the DDR frequency is less then
> + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both
> + disabled.
> +
> + rockchip,lpddr4_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR4, this parameter defines the DRAM side drive
> + strength in ohms. Default value is 60.
> +
> + rockchip,lpddr4_dq_odt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
> + DQS/DQ line strength in ohms. Default value is 40.
> +
> + rockchip,lpddr4_ca_odt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
> + CA line strength in ohms. Default value is 40.
> +
> + rockchip,phy_lpddr4_ca_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR4, this parameter defines the PHY side CA line
> + (including command address line) drive strength. Default value is 40.
> +
> + rockchip,phy_lpddr4_ck_cs_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR4, this parameter defines the PHY side clock
> + line and CS line drive strength. Default value is 80.
> +
> + rockchip,phy_lpddr4_dq_drv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line
> + (including DQS/DQ/DM line) drive strength. Default value is 80.
> +
> + rockchip,phy_lpddr4_odt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
> + strength. Default value is 60.
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rk3399-cru.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + dmc: dmc {

memory-controller {

> + compatible = "rockchip,rk3399-dmc";
> + devfreq-events = <&dfi>;
> + rockchip,pmu = <&pmu>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_DDRC>;
> + clock-names = "dmc_clk";
> + operating-points-v2 = <&dmc_opp_table>;
> + center-supply = <&ppvar_centerlogic>;
> + rockchip,ddr3_speed_bin = <21>;
> + rockchip,pd_idle = <0x40>;
> + rockchip,sr_idle = <0x2>;
> + rockchip,sr_mc_gate_idle = <0x3>;
> + rockchip,srpd_lite_idle = <0x4>;
> + rockchip,standby_idle = <0x2000>;
> + rockchip,dram_dll_dis_freq = <300>;
> + rockchip,phy_dll_dis_freq = <125>;
> + rockchip,auto_pd_dis_freq = <666>;
> + rockchip,ddr3_odt_dis_freq = <333>;
> + rockchip,ddr3_drv = <40>;
> + rockchip,ddr3_odt = <120>;
> + rockchip,phy_ddr3_ca_drv = <40>;
> + rockchip,phy_ddr3_dq_drv = <40>;
> + rockchip,phy_ddr3_odt = <240>;
> + rockchip,lpddr3_odt_dis_freq = <333>;
> + rockchip,lpddr3_drv = <34>;
> + rockchip,lpddr3_odt = <240>;
> + rockchip,phy_lpddr3_ca_drv = <40>;
> + rockchip,phy_lpddr3_dq_drv = <40>;
> + rockchip,phy_lpddr3_odt = <240>;
> + rockchip,lpddr4_odt_dis_freq = <333>;
> + rockchip,lpddr4_drv = <60>;
> + rockchip,lpddr4_dq_odt = <40>;
> + rockchip,lpddr4_ca_odt = <40>;
> + rockchip,phy_lpddr4_ca_drv = <40>;
> + rockchip,phy_lpddr4_ck_cs_drv = <80>;
> + rockchip,phy_lpddr4_dq_drv = <80>;
> + rockchip,phy_lpddr4_odt = <60>;
> + };
> --
> 2.34.1.575.g55b058a8bb-goog
>
>

Next message: Alexander Aring: "Re: [net-next 12/18] net: mac802154: Handle scan requests"
Previous message: Michal Hocko: "Re: [PATCH v2 1/1] mm/vmscan.c: Prevent allocating shrinker_info on offlined nodes"
In reply to: Rob Herring: "Re: [PATCH 01/10] dt-bindings: devfreq: rk3399_dmc: Convert to YAML"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]