Re: [PATCH v2 1/2] sun7i-a20-marsboard.dts: add marsboard-a20 support

From: Conley Lee
Date: Tue Jan 11 2022 - 21:39:39 EST


On 01/11/22 at 11:35上午, Maxime Ripard wrote:
> Date: Tue, 11 Jan 2022 11:35:42 +0100
> From: Maxime Ripard <maxime@xxxxxxxxxx>
> To: conleylee@xxxxxxxxxxx
> Cc: robh@xxxxxxxxxx, wens@xxxxxxxx, devicetree@xxxxxxxxxxxxxxx,
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v2 1/2] sun7i-a20-marsboard.dts: add marsboard-a20
> support
>
> Hi,
>
> On Wed, Jan 05, 2022 at 10:45:50AM +0800, conleylee@xxxxxxxxxxx wrote:
> > From: conley <conleylee@xxxxxxxxxxx>
>
> This should be your full name in the author and signed-off-by
>
> > ARM dts: sun7i: Add Marsboard A20 board
> >
> > This patch add support for Marsboard A20 board.
> >
> > The Marsboard A20 is a A20 based SBC with 1G RAM, 8G Flash, micro SD
> > card slot , SATA socketm 10/100 ethernet, HDMI port, 4 USB2.0 ports, 2
> > USB2.0 OTG, USB WIFI(RTL8188EU) with antenna.
> >
> > Change since v1.
> > - Spearate biddings and dts as two patches.
> > - use SPDX tag
>
> And the changelog should be after the --- below
>
> > Signed-off-by: conley <conleylee@xxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/sun7i-a20-marsboard.dts | 183 ++++++++++++++++++++++
> > 2 files changed, 184 insertions(+)
> > create mode 100644 arch/arm/boot/dts/sun7i-a20-marsboard.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 0de64f237cd8..4628a2617313 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1219,6 +1219,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> > sun7i-a20-icnova-swac.dtb \
> > sun7i-a20-lamobo-r1.dtb \
> > sun7i-a20-linutronix-testbox-v2.dtb \
> > + sun7i-a20-marsboard.dtb \
> > sun7i-a20-m3.dtb \
> > sun7i-a20-mk808c.dtb \
> > sun7i-a20-olimex-som-evb.dtb \
> > diff --git a/arch/arm/boot/dts/sun7i-a20-marsboard.dts b/arch/arm/boot/dts/sun7i-a20-marsboard.dts
> > new file mode 100644
> > index 000000000000..7ab6aa30fee6
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/sun7i-a20-marsboard.dts
> > @@ -0,0 +1,183 @@
> > +// SPDX-License-Identifier: LGPL-2.1+
>
> The license for DT files is usually a dual-license with GPL and MIT,
> which would be:
>
> SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>
> You can't link to a DT, so GPL and LGPL should be equivalent here, and
> MIT is useful for other projects (like the *BSD) that reuse the DT.
>
> > +/*
> > + * Copyright 2021 Conley Lee
> > + * Conley Lee <conleylee@xxxxxxxxxxx>
> > + */
> > +
> > +/dts-v1/;
> > +#include "sun7i-a20.dtsi"
> > +#include "sunxi-common-regulators.dtsi"
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +/ {
> > + model = "HAOYU Electronics Marsboard A20";
> > + compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
>
> Is there multiple boards called marsboard?
>
> If not, then the compatible should be haoyu,marsboard.
>
> The file name should be sun7i-a20-haoyu-marsboard too.
>
> > + aliases {
> > + serial0 = &uart0;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + hdmi-connector {
> > + compatible = "hdmi-connector";
> > + type = "a";
> > +
> > + port {
> > + hdmi_con_in: endpoint {
> > + remote-endpoint = <&hdmi_out_con>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&ahci {
> > + target-supply = <&reg_ahci_5v>;
> > + status = "okay";
> > +};
> > +
> > +&codec {
> > + status = "okay";
> > +};
> > +
> > +&cpu0 {
> > + cpu-supply = <&reg_dcdc2>;
> > +};
> > +
> > +&de {
> > + status = "okay";
> > +};
> > +
> > +&ehci0 {
> > + status = "okay";
> > +};
> > +
> > +&ehci1 {
> > + status = "okay";
> > +};
> > +
> > +&gmac_mii_pins {
> > + pins = "PA0", "PA1", "PA2",
> > + "PA3", "PA4", "PA5", "PA6",
> > + "PA7", "PA8", "PA9", "PA10",
> > + "PA11", "PA12", "PA13", "PA14",
> > + "PA15", "PA16", "PA17";
> > +};
>
> Why do you need that node?
>
> Maxime

1. There are two boards called marsboard, another one is based on
sun4i-a10.
2. About the gmac_mii_pins node: the pin PA17 is connected to PHY
as EXTERR signal on sun7i-a20-marsboard, it's different from
the definetion in dtsi.

Thanks ~