Re: [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing

[Neil Armstrong]

On 12/01/2022 14:01, Gary Bisson wrote:
> Hi,
> 
> On Wed, Jan 12, 2022 at 09:33:42AM +0100, Neil Armstrong wrote:
>> Hi,
>>
>> On 03/01/2022 16:46, Gary Bisson wrote:
>>> - RX/TX signals can be mapped on 2 different pairs of pins so supporting
>>>   both options
>>> - RTS/CTS signals however only have 1 option available
>>>
>>> Signed-off-by: Gary Bisson <gary.bisson@xxxxxxxxxxxxxxxxxxx>
>>> ---
>>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>>> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>>> Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
>>> Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
>>> Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
>>> Cc: devicetree@xxxxxxxxxxxxxxx
>>> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>>> Cc: linux-kernel@xxxxxxxxxxxxxxx
>>> ---
>>>  .../boot/dts/amlogic/meson-g12-common.dtsi    | 27 +++++++++++++++++++
>>>  1 file changed, 27 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>>> index af1357c48bee..3a7773ffbd08 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>>> @@ -1952,6 +1952,33 @@ mux {
>>>  						};
>>>  					};
>>>  
>>> +					uart_ao_b_1_pins: uart-ao-b-1 {
>>> +						mux {
>>> +							groups = "uart_ao_b_tx_2",
>>> +								 "uart_ao_b_rx_3";
>>> +							function = "uart_ao_b";
>>> +							bias-disable;
>>> +						};
>>> +					};
>>> +
>>> +					uart_ao_b_2_pins: uart-ao-b-2 {
>>> +						mux {
>>> +							groups = "uart_ao_b_tx_8",
>>> +								 "uart_ao_b_rx_9";
>>> +							function = "uart_ao_b";
>>> +							bias-disable;
>>> +						};
>>> +					};
>>
>> I'm not fan of these nodes namings.
>>
>> Perhaps :
>> - uart-ao-b-2-3
>> - uart-ao-b-8-9
>>
>> so the actual pins numbers used are more clear ?
> 
> Sure, I wasn't convinced by that naming either. I although thought
> about:
> - uart-ao-b
> - uart-ao-b-alt

Not sure about these because it means one is the default and the second
is an alternate one, and I'm not sure about that. If it's the case, then
this naming is ok.

> 
> Let me know which one you prefer and I'll respin the patch.
> Also let me know if I should re-send the entire series or just this
> patch.

I'm lazy, so the entire patchset please :-)

Thanks,
Neil

> 
> Regards,
> Gary
>