[PATCH v2 2/7] sched/fair: Decay task PELT values during migration
From: Vincent Donnefort
Date: Wed Jan 12 2022 - 11:15:46 EST
Before being migrated to a new CPU, a task sees its PELT values
synchronized with rq last_update_time. Once done, that same task will also
have its sched_avg last_update_time reset. This means the time between
the migration and the last clock update (B) will not be accounted for in
util_avg and a discontinuity will appear. This issue is amplified by the
PELT clock scaling. If the clock hasn't been updated while the CPU is
idle, clock_pelt will not be aligned with clock_task and that time (A)
will be also lost.
---------|----- A -----|-----------|------- B -----|>
clock_pelt clock_task clock now
This is especially problematic for asymmetric CPU capacity systems which
need stable util_avg signals for task placement and energy estimation.
Ideally, this problem would be solved by updating the runqueue clocks
before the migration. But that would require taking the runqueue lock
which is quite expensive [1]. Instead estimate the missing time and update
the task util_avg with that value:
A + B = clock_task - clock_pelt + sched_clock_cpu() - clock
Neither clock_task, clock_pelt nor clock can be accessed without the
runqueue lock. The new runqueue clock_pelt_lag is therefore created and
encode those three values.
clock_pelt_lag = clock - clock_task + clock_pelt
And we can then write the missing time as follow:
A + B = sched_clock_cpu() - clock_pelt_lag
The B. part of the missing time is however an estimation that doesn't take
into account IRQ and Paravirt time.
Now we have an estimation for A + B, we can create an estimator for the
PELT value at the time of the migration. We need for this purpose to
inject last_update_time which is a combination of both clock_pelt and
lost_idle_time. The latter is a time value which is completely lost form a
PELT point of view and must be ignored. And finally, we can write:
rq_clock_pelt_estimator() = last_update_time + A + B
= last_update_time +
sched_clock_cpu() - clock_pelt_lag
[1] https://lore.kernel.org/all/20190709115759.10451-1-chris.redpath@xxxxxxx/
Signed-off-by: Vincent Donnefort <vincent.donnefort@xxxxxxx>
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 06cf7620839a..11c6aeef4583 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -618,6 +618,12 @@ struct rq *task_rq_lock(struct task_struct *p, struct rq_flags *rf)
}
}
+static void update_rq_clock_pelt_lag(struct rq *rq)
+{
+ u64_u32_store(rq->clock_pelt_lag,
+ rq->clock - rq->clock_task + rq->clock_pelt);
+}
+
/*
* RQ-clock updating methods:
*/
@@ -674,6 +680,7 @@ static void update_rq_clock_task(struct rq *rq, s64 delta)
update_irq_load_avg(rq, irq_delta + steal);
#endif
update_rq_clock_pelt(rq, delta);
+ update_rq_clock_pelt_lag(rq);
}
void update_rq_clock(struct rq *rq)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 99ea9540ece4..046d5397eb8a 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6852,6 +6852,14 @@ select_task_rq_fair(struct task_struct *p, int prev_cpu, int wake_flags)
static void detach_entity_cfs_rq(struct sched_entity *se);
+static u64 rq_clock_pelt_estimator(struct rq *rq, u64 last_update_time)
+{
+ u64 pelt_lag = sched_clock_cpu(cpu_of(rq)) -
+ u64_u32_load(rq->clock_pelt_lag);
+
+ return last_update_time + pelt_lag;
+}
+
/*
* Called immediately before a task is migrated to a new CPU; task_cpu(p) and
* cfs_rq_of(p) references at time of call are still valid and identify the
@@ -6859,6 +6867,9 @@ static void detach_entity_cfs_rq(struct sched_entity *se);
*/
static void migrate_task_rq_fair(struct task_struct *p, int new_cpu)
{
+ struct sched_entity *se = &p->se;
+ struct rq *rq = task_rq(p);
+
/*
* As blocked tasks retain absolute vruntime the migration needs to
* deal with this by subtracting the old and adding the new
@@ -6866,7 +6877,6 @@ static void migrate_task_rq_fair(struct task_struct *p, int new_cpu)
* the task on the new runqueue.
*/
if (READ_ONCE(p->__state) == TASK_WAKING) {
- struct sched_entity *se = &p->se;
struct cfs_rq *cfs_rq = cfs_rq_of(se);
se->vruntime -= u64_u32_load(cfs_rq->min_vruntime);
@@ -6877,26 +6887,32 @@ static void migrate_task_rq_fair(struct task_struct *p, int new_cpu)
* In case of TASK_ON_RQ_MIGRATING we in fact hold the 'old'
* rq->lock and can modify state directly.
*/
- lockdep_assert_rq_held(task_rq(p));
- detach_entity_cfs_rq(&p->se);
+ lockdep_assert_rq_held(rq);
+ detach_entity_cfs_rq(se);
} else {
+ u64 now;
+
+ remove_entity_load_avg(se);
+
/*
- * We are supposed to update the task to "current" time, then
- * its up to date and ready to go to new CPU/cfs_rq. But we
- * have difficulty in getting what current time is, so simply
- * throw away the out-of-date time. This will result in the
- * wakee task is less decayed, but giving the wakee more load
- * sounds not bad.
+ * Here, the task's PELT values have been updated according to
+ * the current rq's clock. But if that clock hasn't been
+ * updated in a while, a substantial idle time will be missed,
+ * leading to an inflation after wake-up on the new rq.
+ *
+ * Estimate the PELT clock lag, and update sched_avg to ensure
+ * PELT continuity after migration.
*/
- remove_entity_load_avg(&p->se);
+ now = rq_clock_pelt_estimator(rq, se->avg.last_update_time);
+ __update_load_avg_blocked_se(now, se);
}
/* Tell new CPU we are migrated */
- p->se.avg.last_update_time = 0;
+ se->avg.last_update_time = 0;
/* We have migrated, no longer consider this task hot */
- p->se.exec_start = 0;
+ se->exec_start = 0;
update_scan_period(p, new_cpu);
}
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index f1a445efdc63..fdf2a9e54c0e 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1027,8 +1027,13 @@ struct rq {
/* Ensure that all clocks are in the same cache line */
u64 clock_task ____cacheline_aligned;
u64 clock_pelt;
+ u64 clock_pelt_lag;
unsigned long lost_idle_time;
+#ifndef CONFIG_64BIT
+ u64 clock_pelt_lag_copy;
+#endif
+
atomic_t nr_iowait;
#ifdef CONFIG_SCHED_DEBUG
--
2.25.1