Re: [PATCH v11 1/4] drm/msm/dp: do not initialize phy until plugin interrupt received
From: Stephen Boyd
Date: Wed Jan 12 2022 - 15:03:18 EST
Quoting Kuogee Hsieh (2022-01-11 10:43:23)
> Current DP drivers have regulators, clocks, irq and phy are grouped
> together within a function and executed not in a symmetric manner.
> This increase difficulty of code maintenance and limited code scalability.
> This patch divides the driver life cycle of operation into four states,
> resume (including booting up), dongle plugin, dongle unplugged and suspend.
> Regulators, core clocks and irq are grouped together and enabled at resume
> (or booting up) so that the DP controller is armed and ready to receive HPD
> plugin interrupts. HPD plugin interrupt is generated when a dongle plugs
> into DUT (device under test). Once HPD plugin interrupt is received, DP
> controller will initialize phy so that dpcd read/write will function and
> following link training can be proceeded successfully. DP phy will be
> disabled after main link is teared down at end of unplugged HPD interrupt
> handle triggered by dongle unplugged out of DUT. Finally regulators, code
> clocks and irq are disabled at corresponding suspension.
I'll write out the various scenarios
#1
dongle plugged in with HDMI cable attached
driver probe
#2
dongle unplugged
driver probe
#3
dongle plugged in without HDMI cable attached
driver probe
#4
driver probe
dongle plugged in without HDMI cable attached
#5
driver probe
dongle plugged in with HDMI cable attached
#6
driver probe
dongle plugged in
suspend
resume
#7
driver probe
dongle plugged in
suspend
dongle unplugged
resume
#8
driver probe
dongle plugged in without HDMI cable attached
suspend
resume
#9
driver probe
dongle plugged in without HDMI cable attached
suspend
HDMI cable attached during suspend
resume
What's the state of the phy and core initialized variable at the end of
each of these scenarios? Please fill out the truth table.
+-----------------+------------------------
| false | true |
+-----------------+------------------------
phy_initialized | | |
+-----------------+------------------------
core_initialized | | #1, |
+-----------------+------------------------
I guess we also need eDP scenarios, but that's probably simpler
#10
eDP panel connected
driver probe
#11
eDP panel disconnected
driver probe
#12
eDP panel disconnected
driver probe
suspend
resume
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 7cc4d21..f6bb4bc 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -83,6 +83,7 @@ struct dp_display_private {
>
> /* state variables */
> bool core_initialized;
> + bool phy_initialized;
> bool hpd_irq_on;
> bool audio_supported;
>
> @@ -372,21 +373,46 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
> return rc;
> }
>
> -static void dp_display_host_init(struct dp_display_private *dp, int reset)
> +static void dp_display_host_phy_init(struct dp_display_private *dp)
> {
> - bool flip = false;
> + DRM_DEBUG_DP("core_init=%d phy_init=%d\n",
> + dp->core_initialized, dp->phy_initialized);
>
> + if (!dp->phy_initialized) {
> + dp_ctrl_phy_init(dp->ctrl);
> + dp->phy_initialized = true;
> + }
> +}
> +
> +static void dp_display_host_phy_exit(struct dp_display_private *dp)
> +{
> + DRM_DEBUG_DP("core_init=%d phy_init=%d\n",
> + dp->core_initialized, dp->phy_initialized);
> +
> + if (dp->phy_initialized) {
> + dp_ctrl_phy_exit(dp->ctrl);
> + dp->phy_initialized = false;
> + }
> +}
> +
> +static void dp_display_host_init(struct dp_display_private *dp)
> +{
> DRM_DEBUG_DP("core_initialized=%d\n", dp->core_initialized);
> if (dp->core_initialized) {
> DRM_DEBUG_DP("DP core already initialized\n");
> return;
> }
>
> - if (dp->usbpd->orientation == ORIENTATION_CC2)
> - flip = true;
> + dp_power_init(dp->power, false);
> + dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
> +
> + /*
> + * eDP is the embedded primary display and has its own phy
> + * initialize phy immediately
Question still stands why we can't wait for hpd high from the eDP panel.
Also, I think "has its own phy" means that it's not part of a combo
USB+DP phy? Can you please clarify?
> + */
> + if (dp->dp_display.connector_type == DRM_MODE_CONNECTOR_eDP)
> + dp_display_host_phy_init(dp);
>
> - dp_power_init(dp->power, flip);
> - dp_ctrl_host_init(dp->ctrl, flip, reset);
> dp_aux_init(dp->aux);
> dp->core_initialized = true;
> }
> @@ -1306,20 +1330,23 @@ static int dp_pm_resume(struct device *dev)
> dp->hpd_state = ST_DISCONNECTED;
>
> /* turn on dp ctrl/phy */
> - dp_display_host_init(dp, true);
> + dp_display_host_init(dp);
>
> dp_catalog_ctrl_hpd_config(dp->catalog);
>
> - /*
> - * set sink to normal operation mode -- D0
> - * before dpcd read
> - */
> - dp_link_psm_config(dp->link, &dp->panel->link_info, false);
>
> if (dp_catalog_link_is_connected(dp->catalog)) {
> + /*
> + * set sink to normal operation mode -- D0
> + * before dpcd read
> + */
> + dp_display_host_phy_init(dp);
> + dp_link_psm_config(dp->link, &dp->panel->link_info, false);
> sink_count = drm_dp_read_sink_count(dp->aux);
> if (sink_count < 0)
> sink_count = 0;
> +
> + dp_display_host_phy_exit(dp);
Why is the phy exited on resume when the link is still connected? Is
this supposed to be done only when the sink_count is 0? And how does
this interact with eDP where the phy is initialized by the call to
dp_display_host_init() earlier in this function.
> }
>
> dp->link->sink_count = sink_count;
> @@ -1366,6 +1393,8 @@ static int dp_pm_suspend(struct device *dev)
> dp_display_host_deinit(dp);
> }
>
> + dp_display_host_phy_exit(dp);
> +
> dp->hpd_state = ST_SUSPENDED;
>
> /* host_init will be called at pm_resume */