Re: [PATCH v3] iio: st_sensors: don't always auto-enable I2C and SPI interface drivers

From: Andy Shevchenko
Date: Thu Jan 13 2022 - 10:16:49 EST

Next message: Luis Chamberlain: "Re: [PATCH][next] kernel: Fix spelling mistake "compresser" -> "compressor""
Previous message: Guilherme G. Piccoli: "Re: [PATCH V2] panic: Move panic_print before kmsg dumpers"
In reply to: Andy Shevchenko: "Re: [PATCH v3] iio: st_sensors: don't always auto-enable I2C and SPI interface drivers"
Next in thread: Jonathan Cameron: "Re: [PATCH v3] iio: st_sensors: don't always auto-enable I2C and SPI interface drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Jan 10, 2022 at 06:24:32PM +0300, Nikita Yushchenko wrote:
> This patch makes I2C and SPI interface drivers for STMicroelectronics
> sensor chips individually selectable via Kconfig.
>
> The default is kept unchanged - I2C and SPI interface drivers are still
> selected by default if the corresponding bus support is available.
>
> However, the patch makes it possible to explicitly disable drivers
> that are not needed for a particular target.

FWIW,
Acked-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

> Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
> ---
> Changes since v2:
> - fix subject and spelling in the commit message
> Changes since v1:
> - use "default XXX" instead of "default y if XXX", per suggestion by
> Arnd Bergmann
>
> drivers/iio/accel/Kconfig | 35 ++++++++++++++-----------
> drivers/iio/common/st_sensors/Kconfig | 2 --
> drivers/iio/gyro/Kconfig | 37 ++++++++++++++++-----------
> drivers/iio/imu/st_lsm9ds0/Kconfig | 28 +++++++++++++++-----
> drivers/iio/magnetometer/Kconfig | 35 ++++++++++++++-----------
> drivers/iio/pressure/Kconfig | 35 ++++++++++++++-----------
> 6 files changed, 104 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 49587c992a6d..eb17ca40e08a 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -349,8 +349,6 @@ config IIO_ST_ACCEL_3AXIS
> depends on !SENSORS_LIS3_I2C
> depends on !SENSORS_LIS3_SPI
> select IIO_ST_SENSORS_CORE
> - select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
> - select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
> select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
> help
> Say yes here to build support for STMicroelectronics accelerometers:
> @@ -358,23 +356,30 @@ config IIO_ST_ACCEL_3AXIS
> LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
> LNG2DM, LIS3DE, LIS2DE12, LIS2HH12
>
> - This driver can also be built as a module. If so, these modules
> - will be created:
> - - st_accel (core functions for the driver [it is mandatory]);
> - - st_accel_i2c (necessary for the I2C devices [optional*]);
> - - st_accel_spi (necessary for the SPI devices [optional*]);
> -
> - (*) one of these is necessary to do something.
> + Also need to enable at least one of I2C and SPI interface drivers
> + below.
>
> config IIO_ST_ACCEL_I2C_3AXIS
> - tristate
> - depends on IIO_ST_ACCEL_3AXIS
> - depends on IIO_ST_SENSORS_I2C
> + tristate "STMicroelectronics accelerometers 3-Axis I2C Interface"
> + depends on I2C && IIO_ST_ACCEL_3AXIS
> + default I2C && IIO_ST_ACCEL_3AXIS
> + select IIO_ST_SENSORS_I2C
> + help
> + Build support for STMicroelectronics accelerometers I2C interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_accel_i2c.
>
> config IIO_ST_ACCEL_SPI_3AXIS
> - tristate
> - depends on IIO_ST_ACCEL_3AXIS
> - depends on IIO_ST_SENSORS_SPI
> + tristate "STMicroelectronics accelerometers 3-Axis SPI Interface"
> + depends on SPI_MASTER && IIO_ST_ACCEL_3AXIS
> + default SPI_MASTER && IIO_ST_ACCEL_3AXIS
> + select IIO_ST_SENSORS_SPI
> + help
> + Build support for STMicroelectronics accelerometers SPI interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_accel_spi.
>
> config KXSD9
> tristate "Kionix KXSD9 Accelerometer Driver"
> diff --git a/drivers/iio/common/st_sensors/Kconfig b/drivers/iio/common/st_sensors/Kconfig
> index 9364ec7a811f..eda8f347fda5 100644
> --- a/drivers/iio/common/st_sensors/Kconfig
> +++ b/drivers/iio/common/st_sensors/Kconfig
> @@ -13,5 +13,3 @@ config IIO_ST_SENSORS_SPI
>
> config IIO_ST_SENSORS_CORE
> tristate
> - select IIO_ST_SENSORS_I2C if I2C
> - select IIO_ST_SENSORS_SPI if SPI_MASTER
> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> index a672f7d12bbb..97b86c4a53a6 100644
> --- a/drivers/iio/gyro/Kconfig
> +++ b/drivers/iio/gyro/Kconfig
> @@ -139,30 +139,37 @@ config IIO_ST_GYRO_3AXIS
> tristate "STMicroelectronics gyroscopes 3-Axis Driver"
> depends on (I2C || SPI_MASTER) && SYSFS
> select IIO_ST_SENSORS_CORE
> - select IIO_ST_GYRO_I2C_3AXIS if (I2C)
> - select IIO_ST_GYRO_SPI_3AXIS if (SPI_MASTER)
> select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
> help
> Say yes here to build support for STMicroelectronics gyroscopes:
> L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330, LSM9DS0.
>
> - This driver can also be built as a module. If so, these modules
> - will be created:
> - - st_gyro (core functions for the driver [it is mandatory]);
> - - st_gyro_i2c (necessary for the I2C devices [optional*]);
> - - st_gyro_spi (necessary for the SPI devices [optional*]);
> -
> - (*) one of these is necessary to do something.
> + Also need to enable at least one of I2C and SPI interface drivers
> + below.
>
> config IIO_ST_GYRO_I2C_3AXIS
> - tristate
> - depends on IIO_ST_GYRO_3AXIS
> - depends on IIO_ST_SENSORS_I2C
> + tristate "STMicroelectronics gyroscopes 3-Axis I2C Interface"
> + depends on I2C && IIO_ST_GYRO_3AXIS
> + default I2C && IIO_ST_GYRO_3AXIS
> + select IIO_ST_SENSORS_I2C
> + help
> + Build support for STMicroelectronics gyroscopes I2C interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_gyro_i2c.
> +
>
> config IIO_ST_GYRO_SPI_3AXIS
> - tristate
> - depends on IIO_ST_GYRO_3AXIS
> - depends on IIO_ST_SENSORS_SPI
> + tristate "STMicroelectronics gyroscopes 3-Axis SPI Interface"
> + depends on SPI_MASTER && IIO_ST_GYRO_3AXIS
> + default SPI_MASTER && IIO_ST_GYRO_3AXIS
> + select IIO_ST_SENSORS_SPI
> + help
> + Build support for STMicroelectronics gyroscopes SPI interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_gyro_spi.
> +
>
> config ITG3200
> tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver"
> diff --git a/drivers/iio/imu/st_lsm9ds0/Kconfig b/drivers/iio/imu/st_lsm9ds0/Kconfig
> index 53b7017014f8..d29558edee60 100644
> --- a/drivers/iio/imu/st_lsm9ds0/Kconfig
> +++ b/drivers/iio/imu/st_lsm9ds0/Kconfig
> @@ -5,8 +5,6 @@ config IIO_ST_LSM9DS0
> depends on (I2C || SPI_MASTER) && SYSFS
> depends on !SENSORS_LIS3_I2C
> depends on !SENSORS_LIS3_SPI
> - select IIO_ST_LSM9DS0_I2C if I2C
> - select IIO_ST_LSM9DS0_SPI if SPI_MASTER
> select IIO_ST_ACCEL_3AXIS
> select IIO_ST_MAGN_3AXIS
>
> @@ -17,12 +15,30 @@ config IIO_ST_LSM9DS0
> To compile this driver as a module, choose M here: the module
> will be called st_lsm9ds0.
>
> + Also need to enable at least one of I2C and SPI interface drivers
> +
> config IIO_ST_LSM9DS0_I2C
> - tristate
> - depends on IIO_ST_LSM9DS0
> + tristate "STMicroelectronics LSM9DS0 IMU I2C interface"
> + depends on I2C && IIO_ST_LSM9DS0
> + default I2C && IIO_ST_LSM9DS0
> + select IIO_ST_ACCEL_I2C_3AXIS
> + select IIO_ST_MAGN_I2C_3AXIS
> select REGMAP_I2C
> + help
> + Build support for STMicroelectronics LSM9DS0 IMU I2C interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_lsm9ds0_i2c.
>
> config IIO_ST_LSM9DS0_SPI
> - tristate
> - depends on IIO_ST_LSM9DS0
> + tristate "STMicroelectronics LSM9DS0 IMU SPI interface"
> + depends on SPI_MASTER && IIO_ST_LSM9DS0
> + default SPI_MASTER && IIO_ST_LSM9DS0
> + select IIO_ST_ACCEL_SPI_3AXIS
> + select IIO_ST_MAGN_SPI_3AXIS
> select REGMAP_SPI
> + help
> + Build support for STMicroelectronics LSM9DS0 IMU I2C interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_lsm9ds0_spi.
> diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
> index 565ee41ccb3a..54445365c4bc 100644
> --- a/drivers/iio/magnetometer/Kconfig
> +++ b/drivers/iio/magnetometer/Kconfig
> @@ -117,30 +117,35 @@ config IIO_ST_MAGN_3AXIS
> tristate "STMicroelectronics magnetometers 3-Axis Driver"
> depends on (I2C || SPI_MASTER) && SYSFS
> select IIO_ST_SENSORS_CORE
> - select IIO_ST_MAGN_I2C_3AXIS if (I2C)
> - select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER)
> select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
> help
> Say yes here to build support for STMicroelectronics magnetometers:
> LSM303DLHC, LSM303DLM, LIS3MDL.
>
> - This driver can also be built as a module. If so, these modules
> - will be created:
> - - st_magn (core functions for the driver [it is mandatory]);
> - - st_magn_i2c (necessary for the I2C devices [optional*]);
> - - st_magn_spi (necessary for the SPI devices [optional*]);
> -
> - (*) one of these is necessary to do something.
> + Also need to enable at least one of I2C and SPI interface drivers
> + below.
>
> config IIO_ST_MAGN_I2C_3AXIS
> - tristate
> - depends on IIO_ST_MAGN_3AXIS
> - depends on IIO_ST_SENSORS_I2C
> + tristate "STMicroelectronics magnetometers 3-Axis I2C Interface"
> + depends on I2C && IIO_ST_MAGN_3AXIS
> + default I2C && IIO_ST_MAGN_3AXIS
> + select IIO_ST_SENSORS_I2C
> + help
> + Build support for STMicroelectronics magnetometers I2C interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_magn_i2c.
>
> config IIO_ST_MAGN_SPI_3AXIS
> - tristate
> - depends on IIO_ST_MAGN_3AXIS
> - depends on IIO_ST_SENSORS_SPI
> + tristate "STMicroelectronics magnetometers 3-Axis SPI Interface"
> + depends on SPI_MASTER && IIO_ST_MAGN_3AXIS
> + default SPI_MASTER && IIO_ST_MAGN_3AXIS
> + select IIO_ST_SENSORS_SPI
> + help
> + Build support for STMicroelectronics magnetometers SPI interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_magn_spi.
>
> config SENSORS_HMC5843
> tristate
> diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
> index fc0d3cfca418..0ff756cea63a 100644
> --- a/drivers/iio/pressure/Kconfig
> +++ b/drivers/iio/pressure/Kconfig
> @@ -194,30 +194,35 @@ config IIO_ST_PRESS
> tristate "STMicroelectronics pressure sensor Driver"
> depends on (I2C || SPI_MASTER) && SYSFS
> select IIO_ST_SENSORS_CORE
> - select IIO_ST_PRESS_I2C if (I2C)
> - select IIO_ST_PRESS_SPI if (SPI_MASTER)
> select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
> help
> Say yes here to build support for STMicroelectronics pressure
> sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH.
>
> - This driver can also be built as a module. If so, these modules
> - will be created:
> - - st_pressure (core functions for the driver [it is mandatory]);
> - - st_pressure_i2c (necessary for the I2C devices [optional*]);
> - - st_pressure_spi (necessary for the SPI devices [optional*]);
> -
> - (*) one of these is necessary to do something.
> + Also need to enable at least one of I2C and SPI interface drivers
> + below.
>
> config IIO_ST_PRESS_I2C
> - tristate
> - depends on IIO_ST_PRESS
> - depends on IIO_ST_SENSORS_I2C
> + tristate "STMicroelectronics pressure sensor I2C Interface"
> + depends on I2C && IIO_ST_PRESS
> + default I2C && IIO_ST_PRESS
> + select IIO_ST_SENSORS_I2C
> + help
> + Build support for STMicroelectronics pressure sensor I2C interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_pressure_i2c.
>
> config IIO_ST_PRESS_SPI
> - tristate
> - depends on IIO_ST_PRESS
> - depends on IIO_ST_SENSORS_SPI
> + tristate "STMicroelectronics pressure sensor SPI Interface"
> + depends on SPI_MASTER && IIO_ST_PRESS
> + default SPI_MASTER && IIO_ST_PRESS
> + select IIO_ST_SENSORS_SPI
> + help
> + Build support for STMicroelectronics pressure sensor SPI interface.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called st_pressure_spi.
>
> config T5403
> tristate "EPCOS T5403 digital barometric pressure sensor driver"
> --
> 2.30.2
>

--
With Best Regards,
Andy Shevchenko

Next message: Luis Chamberlain: "Re: [PATCH][next] kernel: Fix spelling mistake "compresser" -> "compressor""
Previous message: Guilherme G. Piccoli: "Re: [PATCH V2] panic: Move panic_print before kmsg dumpers"
In reply to: Andy Shevchenko: "Re: [PATCH v3] iio: st_sensors: don't always auto-enable I2C and SPI interface drivers"
Next in thread: Jonathan Cameron: "Re: [PATCH v3] iio: st_sensors: don't always auto-enable I2C and SPI interface drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]