[PATCH 2/2] ata: Warn about removal of debounce delay in Linux 5.19

[Paul Menzel]

The delay is only needed for a few buggy chipsets (PHYs(?)). As 200 ms
is quite a lot in today times, announce the change of the default in
Linux 5.19, and call for tests and reports.
---
 drivers/ata/libata-sata.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 29a815e2b7248..026ffcfaeaf26 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -318,9 +318,13 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 		 * debouncing. Duration can be configured with module
 		 * parameter debounce_delay_ms.
 		 */
-		if (!(link->flags & ATA_LFLAG_NO_DEBOUNCE_DELAY))
+		if (!(link->flags & ATA_LFLAG_NO_DEBOUNCE_DELAY)) {
 			ata_msleep(link->ap,
 					(libata_debounce_delay_ms < 0) ? 200 : libata_debounce_delay_ms);
+			if (libata_debounce_delay_ms < 0)
+				/* negative values are default */
+				ata_link_warn(link, "Due to historical reasons a 200 ms delay is applied in sata_link_resume(). Most controllers do not need that, so the default will change to 0 ms in Linux 5.19. Please test with lower values using libata.debounce_delay_ms and report the results <linux-ide@xxxxxxxxxxxxxxx>.\n");
+		}
 
 		/* is SControl restored correctly? */
 		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-- 
2.30.2