Re: [PATCH 02/12] RISC-V: MAXPHYSMEM_2GB doesn't depend on CMODEL_MEDLOW
From: Conor.Dooley
Date: Fri Jan 14 2022 - 04:42:05 EST
On 14/01/2022 09:09, Alexandre ghiti wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know
> the content is safe
>
> Hi Conor,
>
> On 1/14/22 09:40, Conor.Dooley@xxxxxxxxxxxxx wrote:
>> On 11/01/2022 16:04, Geert Uytterhoeven wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you
>>> know the content is safe
>>>
>>> Hi Palmer,
>>>
>>> On Fri, Nov 19, 2021 at 5:47 PM Palmer Dabbelt <palmer@xxxxxxxxxxxx>
>>> wrote:
>>>> From: Palmer Dabbelt <palmer@xxxxxxxxxxxx>
>>>>
>>>> For non-relocatable kernels we need to be able to link the kernel at
>>>> approximately PAGE_OFFSET, thus requiring medany (as medlow requires
>>>> the
>>>> code to be linked within 2GiB of 0). The inverse doesn't apply,
>>>> though:
>>>> since medany code can be linked anywhere it's fine to link it close to
>>>> 0, so we can support the smaller memory config.
>>>>
>>>> Fixes: de5f4b8f634b ("RISC-V: Define MAXPHYSMEM_1GB only for RV32")
>>>> Cc: stable@xxxxxxxxxxxxxxx
>>>> Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx>
>>> Thanks for your patch, which is now commit 9f36b96bc70f9707 ("RISC-V:
>>> MAXPHYSMEM_2GB doesn't depend on CMODEL_MEDLOW").
>>>
>>>> I found this when going through the savedefconfig diffs for the K210
>>>> defconfigs. I'm not entirely sure they're doing the right thing here
>>>> (they should probably be setting CMODEL_LOW to take advantage of the
>>>> better code generation), but I don't have any way to test those
>>>> platforms so I don't want to change too much.
>>> I can confirm MAXPHYSMEM_2GB works on K210 with CMODEL_MEDANY.
>>>
>>> As the Icicle has 1760 MiB of RAM, I gave it a try with MAXPHYSMEM_2GB
>>> (and CMODEL_MEDANY), too. Unfortunately it crashes very early
>>> (needs earlycon to see):
>> Given you said 1760 MiB I assume you're not running the device tree
>> currently in the kernel?
>> But the defconfig is /arch/riscv/configs/defconfig?
>>
>> I tested it w/ my newer version of the dts, using both 1760 & 736 MiB
>> (ddrc_cache_lo only) w/ MAXPHYSMEM_2GB.
>> Enabling MAXPHYSMEM_2GB with either CMODEL_MEDANY or CMODEL_MEDLOW
>> lead to the same boot failure as you got.
>
>
> Any chance you can give a try to [1] so that I can extract it from my
> sv48 patchset and propose it to fixes if it works?
Applied, tested with 1760 & 736 MiB - booted fine. :)
>
> Thanks,
>
> Alex
>
> https://patchwork.kernel.org/project/linux-riscv/patch/20211206104657.433304-6-alexandre.ghiti@xxxxxxxxxxxxx/
>
>
>
>>> OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
>>> Machine model: Microchip PolarFire-SoC Icicle Kit
>>> printk: debug: ignoring loglevel setting.
>>> earlycon: ns16550a0 at MMIO32 0x0000000020100000 (options
>>> '115200n8')
>>> printk: bootconsole [ns16550a0] enabled
>>> printk: debug: skip boot console de-registration.
>>> efi: UEFI not found.
>>> Unable to handle kernel paging request at virtual address
>>> ffffffff87e00001
>>> Oops [#1]
>>> Modules linked in:
>>> CPU: 0 PID: 0 Comm: swapper Not tainted
>>> 5.16.0-08771-g85515233477d #56
>>> Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
>>> epc : fdt_check_header+0x14/0x208
>>> ra : early_init_dt_verify+0x16/0x94
>>> epc : ffffffff802ddacc ra : ffffffff8082415a sp : ffffffff81203ee0
>>> gp : ffffffff812ec3a8 tp : ffffffff8120cd80 t0 : 0000000000000005
>>> t1 : 0000001040000000 t2 : ffffffff80000000 s0 : ffffffff81203f00
>>> s1 : ffffffff87e00000 a0 : ffffffff87e00000 a1 : 000000040ffffce7
>>> a2 : 00000000000000e7 a3 : ffffffff8080394c a4 : 0000000000000000
>>> a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
>>> s2 : ffffffff81203f98 s3 : 8000000a00006800 s4 : fffffffffffffff3
>>> s5 : 0000000000000000 s6 : 0000000000000001 s7 : 0000000000000000
>>> s8 : 0000000020236c20 s9 : 0000000000000000 s10: 0000000000000000
>>> s11: 0000000000000000 t3 : 0000000000000018 t4 : 00ff000000000000
>>> t5 : 0000000000000000 t6 : 0000000000000010
>>> status: 0000000200000100 badaddr: ffffffff87e00001 cause:
>>> 000000000000000d
>>> [<ffffffff802ddacc>] fdt_check_header+0x14/0x208
>>> [<ffffffff8082415a>] early_init_dt_verify+0x16/0x94
>>> [<ffffffff80802dee>] setup_arch+0xec/0x4ec
>>> [<ffffffff80800700>] start_kernel+0x88/0x6d6
>>> random: get_random_bytes called from
>>> print_oops_end_marker+0x22/0x44 with crng_init=0
>>> ---[ end trace 903df1a0ade0b876 ]---
>>> Kernel panic - not syncing: Attempted to kill the idle task!
>>> ---[ end Kernel panic - not syncing: Attempted to kill the idle
>>> task! ]---
>>>
>>> So the FDT is at 0xffffffff87e00000, i.e. at 0x7e00000 from the start
>>> of virtual memory (CONFIG_PAGE_OFFSET=0xffffffff80000000), and thus
>>> within the 2 GiB range.
>>>
>>>> --- a/arch/riscv/Kconfig
>>>> +++ b/arch/riscv/Kconfig
>>>> @@ -280,7 +280,7 @@ choice
>>>> depends on 32BIT
>>>> bool "1GiB"
>>>> config MAXPHYSMEM_2GB
>>>> - depends on 64BIT && CMODEL_MEDLOW
>>>> + depends on 64BIT
>>>> bool "2GiB"
>>>> config MAXPHYSMEM_128GB
>>>> depends on 64BIT && CMODEL_MEDANY
>>> Gr{oetje,eeting}s,
>>>
>>> Geert
>>>
>>> --
>>> Geert Uytterhoeven -- There's lots of Linux beyond ia32 --
>>> geert@xxxxxxxxxxxxxx
>>>
>>> In personal conversations with technical people, I call myself a
>>> hacker. But
>>> when I'm talking to journalists I just say "programmer" or something
>>> like that.
>>> -- Linus Torvalds
>>>
>>> _______________________________________________
>>> linux-riscv mailing list
>>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-riscv