[PATCH] tty: Revert the removal of the Cyclades public API
From: Maciej W. Rozycki
Date: Fri Jan 14 2022 - 15:54:15 EST
Fix a user API regression introduced with commit f76edd8f7ce0 ("tty:
cyclades, remove this orphan"), which removed a part of the API and
caused compilation errors for user programs using said part, such as
GCC 9 in its libsanitizer component[1]:
.../libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc:160:10: fatal error: linux/cyclades.h: No such file or directory
160 | #include <linux/cyclades.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:664: sanitizer_platform_limits_posix.lo] Error 1
Any part of the public API is a contract between the kernel and the
userland and therefore once there it must not be removed even if its
implementation side has gone and any relevant calls will now fail
unconditionally.
Revert the part of the commit referred then that affects the user API,
bringing the most recent version of <linux/cyclades.h> back verbatim
modulo the removal of trailing whitespace which used to be there, and
updating <linux/major.h> accordingly.
References:
[1] GCC PR sanitizer/100379, "cyclades.h is removed from linux kernel
header files", <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100379>
Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxxx>
Fixes: f76edd8f7ce0 ("tty: cyclades, remove this orphan")
Cc: stable@xxxxxxxxxxxxxxx # v5.13+
---
include/uapi/linux/cyclades.h | 494 ++++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/major.h | 2
2 files changed, 496 insertions(+)
linux-uapi-cyclades.diff
Index: linux/include/uapi/linux/cyclades.h
===================================================================
--- /dev/null
+++ linux/include/uapi/linux/cyclades.h
@@ -0,0 +1,494 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@xxxxxxxxxxxxxxxxx> and is maintained by
+ * Ivan Passos <ivan@xxxxxxxxxxxx>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1 2002/01/29 11:36:16 henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1 2000/04/19 18:52:52 ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0 1998/11/02 14:20:59 ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5 1998/08/03 16:57:01 ivan
+ *added cyclades_idle_stats structure;
+ *
+ *Revision 2.4 1998/06/01 12:09:53 ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3 1998/03/16 18:01:12 ivan
+ *changes in the cyclades_port structure to get it closer to the
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2 1998/02/17 16:50:00 ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1 1997/10/24 16:03:00 ivan
+ *added rflow (which allows enabling the CD1400 special flow control
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0 1997/06/30 10:30:00 ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8 1997/06/03 15:30:00 ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7 1997/03/26 10:30:00 daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6 1996/09/09 18:35:30 bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5 1995/11/13 21:13:31 bentson
+ *changes suggested by Michael Chastain <mec@xxxxxxxxxxxxxxxxx>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _UAPI_LINUX_CYCLADES_H
+#define _UAPI_LINUX_CYCLADES_H
+
+#include <linux/types.h>
+
+struct cyclades_monitor {
+ unsigned long int_count;
+ unsigned long char_count;
+ unsigned long char_max;
+ unsigned long char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+ __kernel_old_time_t in_use; /* Time device has been in use (secs) */
+ __kernel_old_time_t recv_idle; /* Time since last char received (secs) */
+ __kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */
+ unsigned long recv_bytes; /* Bytes received */
+ unsigned long xmit_bytes; /* Bytes transmitted */
+ unsigned long overruns; /* Input overruns */
+ unsigned long frame_errs; /* Input framing errors */
+ unsigned long parity_errs; /* Input parity errors */
+};
+
+#define CYCLADES_MAGIC 0x4359
+
+#define CYGETMON 0x435901
+#define CYGETTHRESH 0x435902
+#define CYSETTHRESH 0x435903
+#define CYGETDEFTHRESH 0x435904
+#define CYSETDEFTHRESH 0x435905
+#define CYGETTIMEOUT 0x435906
+#define CYSETTIMEOUT 0x435907
+#define CYGETDEFTIMEOUT 0x435908
+#define CYSETDEFTIMEOUT 0x435909
+#define CYSETRFLOW 0x43590a
+#define CYGETRFLOW 0x43590b
+#define CYSETRTSDTR_INV 0x43590c
+#define CYGETRTSDTR_INV 0x43590d
+#define CYZSETPOLLCYCLE 0x43590e
+#define CYZGETPOLLCYCLE 0x43590f
+#define CYGETCD1400VER 0x435910
+#define CYSETWAIT 0x435912
+#define CYGETWAIT 0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC ('M' << 8)
+#define CZ_NBOARDS (CZIOC|0xfa)
+#define CZ_BOOT_START (CZIOC|0xfb)
+#define CZ_BOOT_DATA (CZIOC|0xfc)
+#define CZ_BOOT_END (CZIOC|0xfd)
+#define CZ_TEST (CZIOC|0xfe)
+
+#define CZ_DEF_POLL (HZ/25)
+
+#define MAX_BOARD 4 /* Max number of boards */
+#define MAX_DEV 256 /* Max number of ports total */
+#define CYZ_MAX_SPEED 921600
+
+#define CYZ_FIFO_SIZE 16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+ unsigned short nboard;
+ int status[MAX_BOARD];
+ int nchannel[MAX_BOARD];
+ int fw_rev[MAX_BOARD];
+ unsigned long offset;
+ unsigned long data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/*
+ * Memory Window Sizes
+ */
+
+#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
+#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
+ 8Zo V.2 */
+#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
+
+/*
+ * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ * normally will access only interested on the fpga_id, fpga_version,
+ * start_cpu and stop_cpu.
+ */
+
+struct CUSTOM_REG {
+ __u32 fpga_id; /* FPGA Identification Register */
+ __u32 fpga_version; /* FPGA Version Number Register */
+ __u32 cpu_start; /* CPU start Register (write) */
+ __u32 cpu_stop; /* CPU stop Register (write) */
+ __u32 misc_reg; /* Miscellaneous Register */
+ __u32 idt_mode; /* IDT mode Register */
+ __u32 uart_irq_status; /* UART IRQ status Register */
+ __u32 clear_timer0_irq; /* Clear timer interrupt Register */
+ __u32 clear_timer1_irq; /* Clear timer interrupt Register */
+ __u32 clear_timer2_irq; /* Clear timer interrupt Register */
+ __u32 test_register; /* Test Register */
+ __u32 test_count; /* Test Count Register */
+ __u32 timer_select; /* Timer select register */
+ __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
+ __u32 ram_wait_state; /* RAM wait-state Register */
+ __u32 uart_wait_state; /* UART wait-state Register */
+ __u32 timer_wait_state; /* timer wait-state Register */
+ __u32 ack_wait_state; /* ACK wait State Register */
+};
+
+/*
+ * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ * registers. This structure can be used to access the 9060 registers
+ * (memory mapped).
+ */
+
+struct RUNTIME_9060 {
+ __u32 loc_addr_range; /* 00h - Local Address Range */
+ __u32 loc_addr_base; /* 04h - Local Address Base */
+ __u32 loc_arbitr; /* 08h - Local Arbitration */
+ __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
+ __u32 loc_rom_range; /* 10h - Local ROM Range */
+ __u32 loc_rom_base; /* 14h - Local ROM Base */
+ __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
+ __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
+ __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
+ __u32 loc_range_io; /* 24h - Local Range for Master IO */
+ __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
+ __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
+ __u32 filler1; /* 30h */
+ __u32 filler2; /* 34h */
+ __u32 filler3; /* 38h */
+ __u32 filler4; /* 3Ch */
+ __u32 mail_box_0; /* 40h - Mail Box 0 */
+ __u32 mail_box_1; /* 44h - Mail Box 1 */
+ __u32 mail_box_2; /* 48h - Mail Box 2 */
+ __u32 mail_box_3; /* 4Ch - Mail Box 3 */
+ __u32 filler5; /* 50h */
+ __u32 filler6; /* 54h */
+ __u32 filler7; /* 58h */
+ __u32 filler8; /* 5Ch */
+ __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
+ __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
+ __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
+ __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
+#define WIN_CREG 0x14000001L /* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define TIMER_BY_1M 0x00 /* clock divided by 1M */
+#define TIMER_BY_256K 0x01 /* clock divided by 256k */
+#define TIMER_BY_128K 0x02 /* clock divided by 128k */
+#define TIMER_BY_32K 0x03 /* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ * This file contains the definitions for interfacing with the
+ * Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define MAX_CHAN 64 /* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS 0x00000180L /* signature/pointer address */
+#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
+#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
+#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
+
+#define ZF_TINACT_DEF 1000 /* default inactivity timeout
+ (1000 ms) */
+#define ZF_TINACT ZF_TINACT_DEF
+
+struct FIRM_ID {
+ __u32 signature; /* ZFIRM/U signature */
+ __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define C_OS_LINUX 0x00000030 /* generic Linux system */
+
+/* channel op_mode */
+
+#define C_CH_DISABLE 0x00000000 /* channel is disabled */
+#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
+#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
+#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
+#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
+
+/* comm_parity - parity */
+
+#define C_PR_NONE 0x00000000 /* None */
+#define C_PR_ODD 0x00000001 /* Odd */
+#define C_PR_EVEN 0x00000002 /* Even */
+#define C_PR_MARK 0x00000004 /* Mark */
+#define C_PR_SPACE 0x00000008 /* Space */
+#define C_PR_PARITY 0x000000ff
+
+#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
+#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5 0x00000001
+#define C_DL_CS6 0x00000002
+#define C_DL_CS7 0x00000004
+#define C_DL_CS8 0x00000008
+#define C_DL_CS 0x0000000f
+#define C_DL_1STOP 0x00000010
+#define C_DL_15STOP 0x00000020
+#define C_DL_2STOP 0x00000040
+#define C_DL_STOP 0x000000f0
+
+/* interrupt enabling/status */
+
+#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
+#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
+#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
+#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
+#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
+#define C_IN_MDCD 0x00000100 /* modem DCD change */
+#define C_IN_MDSR 0x00000200 /* modem DSR change */
+#define C_IN_MRI 0x00000400 /* modem RI change */
+#define C_IN_MCTS 0x00000800 /* modem CTS change */
+#define C_IN_RXBRK 0x00001000 /* Break received */
+#define C_IN_PR_ERROR 0x00002000 /* parity error */
+#define C_IN_FR_ERROR 0x00004000 /* frame error */
+#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
+#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
+#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
+#define C_IN_MRTS 0x00040000 /* modem RTS drop */
+#define C_IN_ICHAR 0x00080000
+
+/* flow control */
+
+#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
+#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
+#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
+#define C_FL_SWFLOW 0x0000000f
+
+/* flow status */
+
+#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
+#define C_FS_SENDING 0x00000001 /* UART is sending data */
+#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
+ IOCTLM command */
+#define C_RS_RTS 0x00000001 /* RTS */
+#define C_RS_DTR 0x00000004 /* DTR */
+#define C_RS_DCD 0x00000100 /* CD */
+#define C_RS_DSR 0x00000200 /* DSR */
+#define C_RS_RI 0x00000400 /* RI */
+#define C_RS_CTS 0x00000800 /* CTS */
+
+/* commands Host <-> Board */
+
+#define C_CM_RESET 0x01 /* reset/flush buffers */
+#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
+#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
+#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
+#define C_CM_SENDXOFF 0x10 /* send Xoff */
+#define C_CM_SENDXON 0x11 /* send Xon */
+#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
+#define C_CM_SENDBRK 0x41 /* send break */
+#define C_CM_INTBACK 0x42 /* Interrupt back */
+#define C_CM_SET_BREAK 0x43 /* Tx break on */
+#define C_CM_CLR_BREAK 0x44 /* Tx break off */
+#define C_CM_CMD_DONE 0x45 /* Previous command done */
+#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
+#define C_CM_TINACT 0x51 /* set inactivity detection */
+#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
+#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
+#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
+#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
+#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
+#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
+#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
+ driver */
+#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
+ driver */
+
+#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
+#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
+#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
+#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
+#define C_CM_TXFEMPTY 0x64
+#define C_CM_ICHAR 0x65
+#define C_CM_MDCD 0x70 /* modem DCD change */
+#define C_CM_MDSR 0x71 /* modem DSR change */
+#define C_CM_MRI 0x72 /* modem RI change */
+#define C_CM_MCTS 0x73 /* modem CTS change */
+#define C_CM_MRTS 0x74 /* modem RTS drop */
+#define C_CM_RXBRK 0x84 /* Break received */
+#define C_CM_PR_ERROR 0x85 /* Parity error */
+#define C_CM_FR_ERROR 0x86 /* Frame error */
+#define C_CM_OVR_ERROR 0x87 /* Overrun error */
+#define C_CM_RXOFL 0x88 /* RX buffer overflow */
+#define C_CM_CMDERROR 0x90 /* command error */
+#define C_CM_FATAL 0x91 /* fatal error */
+#define C_CM_HW_RESET 0x92 /* reset board */
+
+/*
+ * CH_CTRL - This per port structure contains all parameters
+ * that control an specific port. It can be seen as the
+ * configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+ __u32 op_mode; /* operation mode */
+ __u32 intr_enable; /* interrupt masking */
+ __u32 sw_flow; /* SW flow control */
+ __u32 flow_status; /* output flow status */
+ __u32 comm_baud; /* baud rate - numerically specified */
+ __u32 comm_parity; /* parity */
+ __u32 comm_data_l; /* data length/stop */
+ __u32 comm_flags; /* other flags */
+ __u32 hw_flow; /* HW flow control */
+ __u32 rs_control; /* RS-232 outputs */
+ __u32 rs_status; /* RS-232 inputs */
+ __u32 flow_xon; /* xon char */
+ __u32 flow_xoff; /* xoff char */
+ __u32 hw_overflow; /* hw overflow counter */
+ __u32 sw_overflow; /* sw overflow counter */
+ __u32 comm_error; /* frame/parity error counter */
+ __u32 ichar;
+ __u32 filler[7];
+};
+
+
+/*
+ * BUF_CTRL - This per channel structure contains
+ * all Tx and Rx buffer control for a given channel.
+ */
+
+struct BUF_CTRL {
+ __u32 flag_dma; /* buffers are in Host memory */
+ __u32 tx_bufaddr; /* address of the tx buffer */
+ __u32 tx_bufsize; /* tx buffer size */
+ __u32 tx_threshold; /* tx low water mark */
+ __u32 tx_get; /* tail index tx buf */
+ __u32 tx_put; /* head index tx buf */
+ __u32 rx_bufaddr; /* address of the rx buffer */
+ __u32 rx_bufsize; /* rx buffer size */
+ __u32 rx_threshold; /* rx high water mark */
+ __u32 rx_get; /* tail index rx buf */
+ __u32 rx_put; /* head index rx buf */
+ __u32 filler[5]; /* filler to align structures */
+};
+
+/*
+ * BOARD_CTRL - This per board structure contains all global
+ * control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+ /* static info provided by the on-board CPU */
+ __u32 n_channel; /* number of channels */
+ __u32 fw_version; /* firmware version */
+
+ /* static info provided by the driver */
+ __u32 op_system; /* op_system id */
+ __u32 dr_version; /* driver version */
+
+ /* board control area */
+ __u32 inactivity; /* inactivity control */
+
+ /* host to FW commands */
+ __u32 hcmd_channel; /* channel number */
+ __u32 hcmd_param; /* pointer to parameters */
+
+ /* FW to Host commands */
+ __u32 fwcmd_channel; /* channel number */
+ __u32 fwcmd_param; /* pointer to parameters */
+ __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+ /* filler so the structures are aligned */
+ __u32 filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE (10*MAX_CHAN)
+
+struct INT_QUEUE {
+ unsigned char intr_code[QUEUE_SIZE];
+ unsigned long channel[QUEUE_SIZE];
+ unsigned long param[QUEUE_SIZE];
+ unsigned long put;
+ unsigned long get;
+};
+
+/*
+ * ZFW_CTRL - This is the data structure that includes all other
+ * data structures used by the Firmware.
+ */
+
+struct ZFW_CTRL {
+ struct BOARD_CTRL board_ctrl;
+ struct CH_CTRL ch_ctrl[MAX_CHAN];
+ struct BUF_CTRL buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+#endif /* _UAPI_LINUX_CYCLADES_H */
Index: linux/include/uapi/linux/major.h
===================================================================
--- linux.orig/include/uapi/linux/major.h
+++ linux/include/uapi/linux/major.h
@@ -34,6 +34,8 @@
#define GOLDSTAR_CDROM_MAJOR 16
#define OPTICS_CDROM_MAJOR 17
#define SANYO_CDROM_MAJOR 18
+#define CYCLADES_MAJOR 19 /* Obsolete */
+#define CYCLADESAUX_MAJOR 20 /* Obsolete */
#define MITSUMI_X_CDROM_MAJOR 20
#define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */
#define SCSI_GENERIC_MAJOR 21