[PATCH 1/2] ARM: dts: gemini: ns2502: permit to use gigabit

[Corentin Labbe]

I believed that gigabit was not working due to some unknown missing GPIO.
In fact, gigabit worked when REALTEK_PHY was compiled out.
So the problem was due to PHY delay and we need to use rgmii-id.

Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/gemini-ns2502.dts | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts
index 37e5debb693c..c759c4c732ab 100644
--- a/arch/arm/boot/dts/gemini-ns2502.dts
+++ b/arch/arm/boot/dts/gemini-ns2502.dts
@@ -39,10 +39,6 @@ mdio0: mdio {
 		phy0: ethernet-phy@1 {
 			reg = <1>;
 			device_type = "ethernet-phy";
-			/* We lack the knowledge of necessary GPIO to achieve
-			 * Gigabit
-			 */
-			max-speed = <100>;
 		};
 	};
 };
@@ -50,7 +46,7 @@ phy0: ethernet-phy@1 {
 &ethernet {
 	status = "okay";
 	ethernet-port@0 {
-		phy-mode = "rgmii";
+		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 		mac-address = [00 1F 1F 8E 65 E2];
 	};
-- 
2.34.1