[PATCH v4] xhci: re-initialize the HC during resume if HCE was set

[Puma Hsu]

When HCE(Host Controller Error) is set, it means an internal
error condition has been detected. Software needs to re-initialize
the HC, so add this check in xhci resume.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Puma Hsu <pumahsu@xxxxxxxxxx>
---
v2: Follow Sergey Shtylyov <s.shtylyov@xxxxxx>'s comment.
v3: Add stable@xxxxxxxxxxxxxxx for stable release.
v4: Refine the commit message.

 drivers/usb/host/xhci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index dc357cabb265..ab440ce8420f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1146,8 +1146,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		temp = readl(&xhci->op_regs->status);
 	}
 
-	/* If restore operation fails, re-initialize the HC during resume */
-	if ((temp & STS_SRE) || hibernated) {
+	/* If restore operation fails or HC error is detected, re-initialize the HC during resume */
+	if ((temp & (STS_SRE | STS_HCE)) || hibernated) {
 
 		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
 				!(xhci_all_ports_seen_u0(xhci))) {
-- 
2.34.1.703.g22d0c6ccf7-goog