Re: [RFC PATCH v2 0/8] fprobe: Introduce fprobe function entry/exit probe

[Jiri Olsa]

On Sat, Jan 15, 2022 at 01:52:19PM +0900, Masami Hiramatsu wrote:
> On Thu, 13 Jan 2022 13:27:34 +0100
> Jiri Olsa <jolsa@xxxxxxxxxx> wrote:
> 
> > On Wed, Jan 12, 2022 at 05:01:15PM +0100, Jiri Olsa wrote:
> > > On Wed, Jan 12, 2022 at 11:02:46PM +0900, Masami Hiramatsu wrote:
> > > > Hi Jiri and Alexei,
> > > > 
> > > > Here is the 2nd version of fprobe. This version uses the
> > > > ftrace_set_filter_ips() for reducing the registering overhead.
> > > > Note that this also drops per-probe point private data, which
> > > > is not used anyway.
> > > > 
> > > > This introduces the fprobe, the function entry/exit probe with
> > > > multiple probe point support. This also introduces the rethook
> > > > for hooking function return as same as kretprobe does. This
> > > 
> > > nice, I was going through the multi-user-graph support 
> > > and was wondering that this might be a better way
> > > 
> > > > abstraction will help us to generalize the fgraph tracer,
> > > > because we can just switch it from rethook in fprobe, depending
> > > > on the kernel configuration.
> > > > 
> > > > The patch [1/8] and [7/8] are from your series[1]. Other libbpf
> > > > patches will not be affected by this change.
> > > 
> > > I'll try the bpf selftests on top of this
> > 
> > I'm getting crash and stall when running bpf selftests,
> > the fprobe sample module works fine, I'll check on that
> 
> OK, I got a kernel stall. I missed to enable CONFIG_FPROBE.
> I think vmtest.sh should support menuconfig option.
> 
> #6 bind_perm:OK
> #7 bloom_filter_map:OK
> [  107.282403] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large:
> [  107.283240] clocksource:                       'hpet' wd_nsec: 496216090 wd_now: 7ddc7120 wd_last: 7ae746b7 mask: ffffffff
> [  107.284045] clocksource:                       'tsc' cs_nsec: 495996979 cs_now: 31fdb69b39 cs_last: 31c2d29219 mask: ffffffffffffffff
> [  107.284926] clocksource:                       'tsc' is current clocksource.
> [  107.285487] tsc: Marking TSC unstable due to clocksource watchdog
> [  107.285973] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
> [  107.286616] sched_clock: Marking unstable (107240582544, 45390230)<-(107291410145, -5437339)
> [  107.290408] clocksource: Not enough CPUs to check clocksource 'tsc'.
> [  107.290879] clocksource: Switched to clocksource hpet
> [  604.210415] INFO: rcu_tasks detected stalls on tasks:
> [  604.210830] (____ptrval____): .. nvcsw: 86/86 holdout: 1 idle_cpu: -1/0
> [  604.211314] task:test_progs      state:R  running task     stack:    0 pid:   87 ppid:    85 flags:0x00004000
> [  604.212058] Call Trace:
> [  604.212246]  <TASK>
> [  604.212452]  __schedule+0x362/0xbb0
> [  604.212723]  ? preempt_schedule_notrace_thunk+0x16/0x18
> [  604.213107]  preempt_schedule_notrace+0x48/0x80
> [  604.217403]  ? asm_sysvec_apic_timer_interrupt+0x12/0x20
> [  604.217790]  ? ftrace_regs_call+0xd/0x52
> [  604.218087]  ? bpf_test_finish.isra.0+0x190/0x190
> [  604.218461]  ? bpf_fentry_test1+0x5/0x10
> [  604.218750]  ? trace_clock_x86_tsc+0x10/0x10
> [  604.219064]  ? __sys_bpf+0x8b1/0x2970
> [  604.219337]  ? lock_is_held_type+0xd7/0x130
> [  604.219680]  ? __x64_sys_bpf+0x1c/0x20
> [  604.219957]  ? do_syscall_64+0x35/0x80
> [  604.220237]  ? entry_SYSCALL_64_after_hwframe+0x44/0xae
> [  604.220653]  </TASK>
> 
> Jiri, is that what you had seen? 

hi,
sorry for late response

I did not get any backtrace for the stall, debugging showed 
that the first probed function was called over and over for
some reason

as for the crash I used the small fix below

do you have any newer version I could play with?

jirka


---
diff --git a/kernel/trace/fprobe.c b/kernel/trace/fprobe.c
index 3333893e5217..883151275892 100644
--- a/kernel/trace/fprobe.c
+++ b/kernel/trace/fprobe.c
@@ -157,7 +157,8 @@ int unregister_fprobe(struct fprobe *fp)
 	ret = unregister_ftrace_function(&fp->ftrace);
 
 	if (!ret) {
-		rethook_free(fp->rethook);
+		if (fp->rethook)
+			rethook_free(fp->rethook);
 		if (fp->syms) {
 			kfree(fp->addrs);
 			fp->addrs = NULL;