Re: [PATCH net-next v12 4/7] arm64: dts: mt2712: update ethernet device node

[Biao Huang]

Dear Matthias,

	Any comments about this dts patch?
	Thanks in advance.

Regards!
Biao

On Mon, 2022-01-17 at 15:07 +0800, Biao Huang wrote:
> Since there are some changes in ethernet driver:
> update ethernet device node in dts to accommodate to it.
> 
> 1. stmmac_probe_config_dt() in stmmac_platform.c will initialize
> specified
>    parameters according to compatible string "snps,dwmac-4.20a",
> then,
>    dwmac-mediatek.c can skip the initialization if add compatible
> string
>    "snps,dwmac-4.20a" in eth device node.
> 2. commit 882007ed7832 ("net-next: dt-binding: dwmac-mediatek: add
> more
>    description for RMII") added rmii internal support, we should add
>    corresponding clocks/clocks-names in eth device node.
> 3. add "snps,reset-delays-us = <0 10000 10000>;" to ensure reset
> delay
>    can meet PHY requirement.
> 
> Signed-off-by: Biao Huang <biao.huang@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/mediatek/mt2712-evb.dts |  1 +
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi   | 14 +++++++++-----
>  2 files changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> index 7d369fdd3117..11aa135aa0f3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> @@ -110,6 +110,7 @@ &eth {
>  	phy-handle = <&ethernet_phy0>;
>  	mediatek,tx-delay-ps = <1530>;
>  	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
> +	snps,reset-delays-us = <0 10000 10000>;
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&eth_default>;
>  	pinctrl-1 = <&eth_sleep>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> index a9cca9c146fd..9e850e04fffb 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> @@ -726,7 +726,7 @@ queue2 {
>  	};
>  
>  	eth: ethernet@1101c000 {
> -		compatible = "mediatek,mt2712-gmac";
> +		compatible = "mediatek,mt2712-gmac", "snps,dwmac-
> 4.20a";
>  		reg = <0 0x1101c000 0 0x1300>;
>  		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
>  		interrupt-names = "macirq";
> @@ -734,15 +734,19 @@ eth: ethernet@1101c000 {
>  		clock-names = "axi",
>  			      "apb",
>  			      "mac_main",
> -			      "ptp_ref";
> +			      "ptp_ref",
> +			      "rmii_internal";
>  		clocks = <&pericfg CLK_PERI_GMAC>,
>  			 <&pericfg CLK_PERI_GMAC_PCLK>,
>  			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
> -			 <&topckgen CLK_TOP_ETHER_50M_SEL>;
> +			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
> +			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
>  		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
> -				  <&topckgen CLK_TOP_ETHER_50M_SEL>;
> +				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
> +				  <&topckgen
> CLK_TOP_ETHER_50M_RMII_SEL>;
>  		assigned-clock-parents = <&topckgen
> CLK_TOP_ETHERPLL_125M>,
> -					 <&topckgen CLK_TOP_APLL1_D3>;
> +					 <&topckgen CLK_TOP_APLL1_D3>,
> +					 <&topckgen
> CLK_TOP_ETHERPLL_50M>;
>  		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
>  		mediatek,pericfg = <&pericfg>;
>  		snps,axi-config = <&stmmac_axi_setup>;