Re: [PATCH v2] net: phy: marvell: Honor phy LED set by system firmware on a Dell hardware
From: Kai-Heng Feng
Date: Fri Jan 21 2022 - 09:05:03 EST
On Fri, Jan 21, 2022 at 9:05 PM Andrew Lunn <andrew@xxxxxxx> wrote:
>
> > > Since you talked about suspend/resume, does this machine support WoL?
> > > Is the BIOS configuring LED2 to be used as an interrupt when WoL is
> > > enabled in the BIOS? Do you need to save/restore that configuration
> > > over suspend/review? And prevent the driver from changing the
> > > configuration?
> >
> > This NIC on the machine doesn't support WoL.
>
> I'm surprised about that. Are you really sure?
Yes I am sure.
>
> What are you doing for resume? pressing the power button?
Power button, RTC. The system has another igb NIC, which supports WoL.
>
> > > > +static const struct dmi_system_id platform_flags[] = {
> > > > + {
> > > > + .matches = {
> > > > + DMI_MATCH(DMI_SYS_VENDOR, "Dell EMC"),
> > > > + DMI_MATCH(DMI_PRODUCT_NAME, "Edge Gateway 3200"),
> > > > + },
> > > > + .driver_data = (void *)PHY_USE_FIRMWARE_LED,
> > > > + },
> > >
> > > This needs a big fat warning, that it will affect all LEDs for PHYs
> > > which linux is driving, on that machine. So PHYs on USB dongles, PHYs
> > > in SFPs, PHYs on plugin PCIe card etc.
> > >
> > > Have you talked with Dells Product Manager and do they understand the
> > > implications of this?
> >
> > Right, that's why the original approach is passing the flag from the MAC driver.
> > That approach can be more specific and doesn't touch unrelated PHYs.
>
> More specific, but still will go wrong at some point, A PCEe card
> using that MAC etc. And this is general infrastructure you are adding
> here, it can be used by any machine, any combination of MAC and PHY
> etc. So you need to clearly document its limits so others are not
> surprised.
The dwmac-intel device is an integrated end point connects directly to
the host bridge, so it won't be in a form of PCIe addin card.
Kai-Heng
>
> Andrew