Re: [PATCH v2 2/9] Coresight: Add coresight TPDM source driver

From: Mathieu Poirier
Date: Fri Jan 21 2022 - 12:16:05 EST

Next message: Steven Rostedt: "Re: [PATCH v3 0/2] sched/tracing: sched_switch prev_state reported as TASK_RUNNING when it's not"
Previous message: Rafael J. Wysocki: "Re: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support"
In reply to: Jinlong Mao: "Re: [PATCH v2 2/9] Coresight: Add coresight TPDM source driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hey Jinlong,

On Fri, Jan 21, 2022 at 10:01:47PM +0800, Jinlong Mao wrote:
> Hi Mathieu,
>
> Good Day.
>
> On 12/17/2021 3:02 AM, Mathieu Poirier wrote:
> > [...]
> >
> > > > > > +
> > > > > > +static void tpdm_init_default_data(struct tpdm_drvdata *drvdata)
> > > > > > +{
> > > > > > + static int traceid = TPDM_TRACE_ID_START;
> > > > > > +
> > > > > > + drvdata->traceid = traceid++;
> > > > > > +}
> > > > > I have been specific on how to properly do this in the last revision. Given the
> > > > > above about the MAINTAINERS file, I am not sure that I will continue reviewing this set.
> > > > >
> > > > > There is also no need to rush another revision as I won't have the bandwidth to
> > > > > process it before the holidays.
> > > > >
> > > > > Thanks,
> > > > > Mathieu
> > > > Hi Mathieu,
> > > >
> > > > Sorry, not addressed your previous comments here.
> > > >
> > > > For the trace id, each coresight component has 7 bits to store the trace
> > > > id. So the trace id should be from 1 to 127 as 0 is invalid.
> > > IDs 0x70 - 0x7F (`112 - 127 ) are reserved - see the ARM Coresight
> > > Architecture specification v3.0
> > >
> > Correct
> >
> > > > Apart from TPDMs/STM/ETMs, we also have other coresight components in
> > > > our internal device. About 80 ids are already used.
> > > >
> > > > Some components have fixed trace id in HW. If we use functions below to
> > > > count the trace id, there will be conflict to other components.
> > > >
> > > > Can we use 1-15 for etm trace ids and 16 - 127 for other coresight
> > > > components ? And handle trace ids in its' own driver ?
> > > >
> > > This will limit systems to 15 cores - some have more!
> > >
> > Correct
> >
> > > > static inline int coresight_get_system_trace_id(int id)
> > > > {
> > > > /* Start system IDs above the highest per CPU trace ID. */
> > > > return coresigth_get_trace_id(cpumask_last(cpu_possible_mask) + 1);
> > > > }
> > Looking at my own suggestion again this won't work since it returns the same traceID
> > when called multiple times.
> >
> > For this patchset and _without_ taking into account internal devices that have
> > their traceID set in HW:
> >
> > 1. Define a bitmask that is 7 bit wide.
> Should it be a 128 bit wide bitmask (0--127)?

Yes, you are correct.

> > 2. By default, set bits under 0x10 and between 0x70 - 0x7F.
> > 3. In coresight_get_system_trace_id(), drop the @id parameter and allocate the
> > first available bit after cpumask_last(cpu_possible_mask) + 1.
>
> Should it allocate the first available bit after (cpumask_last(cpu_possible_mask) *2 ) + 0x10 ?
> Return the first zero bit position as the trace id and set the bit.

I need to clarify something with Mike on this - I will get back to you on
Monday.

>
> > 4. Define a new function called coresight_put_system_trace_id(int id) that
> > clears the bit in the mask corresponding to @id.
> >
> > For now that should work.
> >
> > > > static inline int coresight_get_trace_id(int cpu)
> > > > {
> > > > /*
> > > > * A trace ID of value 0 is invalid, so let's start at some
> > > > * random value that fits in 7 bits and go from there. Since
> > > > * the common convention is to have data trace IDs be I(N) + 1,
> > > > * set instruction trace IDs as a function of the CPU number.
> > > > */
> > > > return (CORESIGHT_ETM_PMU_SEED + (cpu * 2));
> > > > }
> > > >
> > > This fixed relationship between cpu and trace ID is used in the perf
> > > tooling to populate the elements in the perf.data file to correctly
> > > allow association between CPU and trace data, and thus allow correct
> > > trace decode.
> > TraceIDs associated to CPUs are communicated to the perf tooling by way of the
> > perf header - theoretically we should be able to change the allocation scheme
> > without impacting the decoding process.
> >
> > > It should be possible to create another more dynamic mapping scheme -
> > > but this must include a way to support the perf requirements too.
> > >
> > TraceIDs have been a lurking problem for as long as the subsystem has existed.
> > For now what I have suggested above should be sufficient to provide an
> > in-between solution that doesn't hold back this patchset.
> >
> > That being said, we need to start thinking about the best way to do this. I
> > will put a patchset together in the new year that aims in that direction.
> >
> > > Regards
> > >
> > > Mike
> > >
> > > > Thanks
> > > >
> > > > Jinlong Mao
> > > >
> > > > > > +
> > > > > > +static int tpdm_probe(struct amba_device *adev, const struct amba_id *id)
> > > > > > +{
> > > > > > + struct device *dev = &adev->dev;
> > > > > > + struct coresight_platform_data *pdata;
> > > > > > + struct tpdm_drvdata *drvdata;
> > > > > > + struct coresight_desc desc = { 0 };
> > > > > > +
> > > > > > + desc.name = coresight_alloc_device_name(&tpdm_devs, dev);
> > > > > > + if (!desc.name)
> > > > > > + return -ENOMEM;
> > > > > > + pdata = coresight_get_platform_data(dev);
> > > > > > + if (IS_ERR(pdata))
> > > > > > + return PTR_ERR(pdata);
> > > > > > + adev->dev.platform_data = pdata;
> > > > > > +
> > > > > > + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
> > > > > > + if (!drvdata)
> > > > > > + return -ENOMEM;
> > > > > > + drvdata->dev = &adev->dev;
> > > > > > + dev_set_drvdata(dev, drvdata);
> > > > > > +
> > > > > > + drvdata->base = devm_ioremap_resource(dev, &adev->res);
> > > > > > + if (!drvdata->base)
> > > > > > + return -ENOMEM;
> > > > > > +
> > > > > > + mutex_init(&drvdata->lock);
> > > > > > +
> > > > > > + desc.type = CORESIGHT_DEV_TYPE_SOURCE;
> > > > > > + desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_SYS;
> > > > > > + desc.ops = &tpdm_cs_ops;
> > > > > > + desc.pdata = adev->dev.platform_data;
> > > > > > + desc.dev = &adev->dev;
> > > > > > + drvdata->csdev = coresight_register(&desc);
> > > > > > + if (IS_ERR(drvdata->csdev))
> > > > > > + return PTR_ERR(drvdata->csdev);
> > > > > > +
> > > > > > + tpdm_init_default_data(drvdata);
> > > > > > + pm_runtime_put(&adev->dev);
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static void __exit tpdm_remove(struct amba_device *adev)
> > > > > > +{
> > > > > > + struct tpdm_drvdata *drvdata = dev_get_drvdata(&adev->dev);
> > > > > > +
> > > > > > + coresight_unregister(drvdata->csdev);
> > > > > > +}
> > > > > > +
> > > > > > +static struct amba_id tpdm_ids[] = {
> > > > > > + {
> > > > > > + .id = 0x000f0e00,
> > > > > > + .mask = 0x000fff00,
> > > > > > + },
> > > > > > + { 0, 0},
> > > > > > +};
> > > > > > +
> > > > > > +static struct amba_driver tpdm_driver = {
> > > > > > + .drv = {
> > > > > > + .name = "coresight-tpdm",
> > > > > > + .owner = THIS_MODULE,
> > > > > > + .suppress_bind_attrs = true,
> > > > > > + },
> > > > > > + .probe = tpdm_probe,
> > > > > > + .id_table = tpdm_ids,
> > > > > > +};
> > > > > > +
> > > > > > +module_amba_driver(tpdm_driver);
> > > > > > +
> > > > > > +MODULE_LICENSE("GPL v2");
> > > > > > +MODULE_DESCRIPTION("Trace, Profiling & Diagnostic Monitor driver");
> > > > > > diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h
> > > > > > new file mode 100644
> > > > > > index 000000000000..980ae90ff1c8
> > > > > > --- /dev/null
> > > > > > +++ b/drivers/hwtracing/coresight/coresight-tpdm.h
> > > > > > @@ -0,0 +1,31 @@
> > > > > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > > > > +/*
> > > > > > + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
> > > > > > + */
> > > > > > +
> > > > > > +#ifndef _CORESIGHT_CORESIGHT_TPDM_H
> > > > > > +#define _CORESIGHT_CORESIGHT_TPDM_H
> > > > > > +
> > > > > > +/* Default value of the traceid */
> > > > > > +#define TPDM_TRACE_ID_START 128
> > > > > > +
> > > > > > +/**
> > > > > > + * struct tpdm_drvdata - specifics associated to an TPDM component
> > > > > > + * @base: memory mapped base address for this component.
> > > > > > + * @dev: The device entity associated to this component.
> > > > > > + * @csdev: component vitals needed by the framework.
> > > > > > + * @lock: lock for the enable value.
> > > > > > + * @enable: enable status of the component.
> > > > > > + * @traceid: value of the current ID for this component.
> > > > > > + */
> > > > > > +
> > > > > > +struct tpdm_drvdata {
> > > > > > + void __iomem *base;
> > > > > > + struct device *dev;
> > > > > > + struct coresight_device *csdev;
> > > > > > + struct mutex lock;
> > > > > > + bool enable;
> > > > > > + int traceid;
> > > > > > +};
> > > > > > +
> > > > > > +#endif /* _CORESIGHT_CORESIGHT_TPDM_H */
> > > > > > diff --git a/include/linux/coresight.h b/include/linux/coresight.h
> > > > > > index 93a2922b7653..e48d463be63b 100644
> > > > > > --- a/include/linux/coresight.h
> > > > > > +++ b/include/linux/coresight.h
> > > > > > @@ -65,6 +65,7 @@ enum coresight_dev_subtype_source {
> > > > > > CORESIGHT_DEV_SUBTYPE_SOURCE_PROC,
> > > > > > CORESIGHT_DEV_SUBTYPE_SOURCE_BUS,
> > > > > > CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE,
> > > > > > + CORESIGHT_DEV_SUBTYPE_SOURCE_SYS,
> > > > > > };
> > > > > >
> > > > > > enum coresight_dev_subtype_helper {
> > > > > > --
> > > > > > 2.17.1
> > > > > >
> > >
> > >
> > > --
> > > Mike Leach
> > > Principal Engineer, ARM Ltd.
> > > Manchester Design Centre. UK

Next message: Steven Rostedt: "Re: [PATCH v3 0/2] sched/tracing: sched_switch prev_state reported as TASK_RUNNING when it's not"
Previous message: Rafael J. Wysocki: "Re: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support"
In reply to: Jinlong Mao: "Re: [PATCH v2 2/9] Coresight: Add coresight TPDM source driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]