Re: [RFC PATCH] Bluetooth: hci_event: Ignore multiple conn complete events
From: Sönke Huster
Date: Fri Jan 21 2022 - 18:52:53 EST
Hi Luiz,
On 22.01.22 00:32, Luiz Augusto von Dentz wrote:
> Hi Sönke,
>
> On Fri, Jan 21, 2022 at 3:18 PM Sönke Huster <soenke.huster@xxxxxxxxx> wrote:
>>
>> Hi Luiz,
>>
>> On 21.01.22 22:31, Luiz Augusto von Dentz wrote:
>>> Hi Sönke,
>>>
>>> On Fri, Jan 21, 2022 at 10:22 AM Sönke Huster <soenke.huster@xxxxxxxxx> wrote:
>>>>
>>>> I just noticed that just checking for handle does not work, as obviously 0x0 could also be a handle value and therefore it can't be distinguished, whether it is not set yet or it is 0x0.
>>>
>>> Yep, we should probably check its state, check for state != BT_OPEN
>>> since that is what hci_conn_add initialize the state.
>>>
>>
>> I thought there are more valid connection states for the first HCI_CONNECTION_COMPLETE event, as it also occurs e.g. after an HCI_Create_Connection command, see Core 5.3 p.2170:
>>> This event also indicates to the Host which issued the HCI_Create_Connection, HCI_Accept_-
>>> Connection_Request, or HCI_Reject_Connection_Request command, and
>>> then received an HCI_Command_Status event, if the issued command failed or
>>> was successful.
>>
>> For example in hci_conn.c hci_acl_create_connection (which triggers a HCI_Create_Connection command as far as I understand), the state of the connection is changed to BT_CONNECT or BT_CONNECT2.
>> But as I am quite new in the (Linux) Bluetooth world, I might have a wrong understanding of that.
>
> Yep, we would probably need a switch to capture which states are valid
> and which are not or we initialize the handle with something outside
> of the valid range of handles (0x0000 to 0x0EFF) so we can initialize
> it to e.g. 0xffff (using something like define HCI_CONN_HANDLE_UNSET)
> so we can really tell when it has been set or not.
>
I think the state switch is just possible if there is no possibility
to change a connection state back into one of the accepted states.
Unless changing the state back into an accepted state includes a call
to "hci_conn_del_sysfs", as the real issue when getting a duplicate
HCI_Create_Connection event is that device_add in hci_conn_add_sysfs
is called twice for the same connection.
There might be other issues as well in processing a duplicate event,
but as far as I can see the bugs I trigger rely on multiple calls to
device_add which lead in the long run to multiple user-after frees
or null-pointer derefs. I tried to write that up in the bugzilla report
here: https://bugzilla.kernel.org/show_bug.cgi?id=215497
When using something like HCI_CONN_HANDLE_UNSET, we need to make sure
that everywhere where we receive a handle from an event and use it to
set conn->handle, it is a valid one. Otherwise a hacked / malicious
controller would just send multiple events for the invalid handle.
What solution do you prefer? If you don't mind I'd like to try to
create a patch.
>>>> On 21.01.22 18:36, Soenke Huster wrote:
>>>>> When a HCI_CONNECTION_COMPLETE event is received multiple times
>>>>> for the same handle, the device is registered multiple times which leads
>>>>> to memory corruptions. Therefore, consequent events for a single
>>>>> connection are ignored.
>>>>>
>>>>> The conn->state can hold different values so conn->handle is
>>>>> checked to detect whether a connection is already set up.
>>>>>
>>>>> Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497
>>>>> Signed-off-by: Soenke Huster <soenke.huster@xxxxxxxxx>
>>>>> ---
>>>>> This fixes the referenced bug and several use-after-free issues I discovered.
>>>>> I tagged it as RFC, as I am not 100% sure if checking the existence of the
>>>>> handle is the correct approach, but to the best of my knowledge it must be
>>>>> set for the first time in this function for valid connections of this event,
>>>>> therefore it should be fine.
>>>>>
>>>>> net/bluetooth/hci_event.c | 11 +++++++++++
>>>>> 1 file changed, 11 insertions(+)
>>>>>
>>>>> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
>>>>> index 681c623aa380..71ccb12c928d 100644
>>>>> --- a/net/bluetooth/hci_event.c
>>>>> +++ b/net/bluetooth/hci_event.c
>>>>> @@ -3106,6 +3106,17 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
>>>>> }
>>>>> }
>>>>>
>>>>> + /* The HCI_Connection_Complete event is only sent once per connection.
>>>>> + * Processing it more than once per connection can corrupt kernel memory.
>>>>> + *
>>>>> + * As the connection handle is set here for the first time, it indicates
>>>>> + * whether the connection is already set up.
>>>>> + */
>>>>> + if (conn->handle) {
>>>>> + bt_dev_err(hdev, "Ignoring HCI_Connection_Complete for existing connection");
>>>>> + goto unlock;
>>>>> + }
>>>>> +
>>>>> if (!ev->status) {
>>>>> conn->handle = __le16_to_cpu(ev->handle);
>>>>>
>>>
>>>
>>>
>>
>> Best
>> Sönke
>
>
>