Re: [PATCH 2/4] mtd: rawnand: gpmi: fix controller timings setting

[Miquel Raynal]

On Tue, 2022-01-18 at 09:54:32 UTC, Dario Binacchi wrote:
> Set the controller registers according to the real clock rate. The
> controller registers configuration (setup, hold, timeout, ... cycles)
> depends on the clock rate of the GPMI. Using the real rate instead of
> the ideal one, avoids that this inaccuracy (required_rate - real_rate)
> affects the registers setting.
> 
> This patch has been tested on two custom boards with i.MX28 and i.MX6
> SOCs:
> - i.MX28:
>   required rate 100MHz, real rate 99.3MHz
> - i.MX6
>   required rate 100MHz, real rate 99MHz
> 
> Fixes: b1206122069a ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
> Co-developed-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
> Tested-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Reviewed-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel