Re: [PATCH v3 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO

[Jean Delvare]

Hi Terry,

On Tue, 18 Jan 2022 14:22:33 -0600, Terry Bowman wrote:
> cd6h/cd7h port I/O can be disabled on recent AMD hardware. Read
> accesses to disabled cd6h/cd7h port I/O will return F's and written
> data is dropped. It is recommended to replace the cd6h/cd7h
> port I/O with MMIO.
> 
> Co-developed-by: Robert Richter <rrichter@xxxxxxx>
> Signed-off-by: Robert Richter <rrichter@xxxxxxx>
> Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx>
> To: Guenter Roeck <linux@xxxxxxxxxxxx>
> To: linux-watchdog@xxxxxxxxxxxxxxx
> To: Jean Delvare <jdelvare@xxxxxxxx>
> To: linux-i2c@xxxxxxxxxxxxxxx
> To: Wolfram Sang <wsa@xxxxxxxxxx>
> To: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> To: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
> Cc: Robert Richter <rrichter@xxxxxxx>
> Cc: Thomas Lendacky <thomas.lendacky@xxxxxxx>
> ---
>  drivers/watchdog/sp5100_tco.c | 88 ++++++++++++++++++++++++++++++++++-
>  drivers/watchdog/sp5100_tco.h |  5 ++
>  2 files changed, 92 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
> index 64ecebd93403..36519a992ca1 100644
> --- a/drivers/watchdog/sp5100_tco.c
> +++ b/drivers/watchdog/sp5100_tco.c
> @@ -49,7 +49,7 @@
>  /* internal variables */
>  
>  enum tco_reg_layout {
> -	sp5100, sb800, efch
> +	sp5100, sb800, efch, efch_mmio
>  };
>  
>  struct sp5100_tco {
> @@ -209,6 +209,8 @@ static void tco_timer_enable(struct sp5100_tco *tco)
>  					  ~EFCH_PM_WATCHDOG_DISABLE,
>  					  EFCH_PM_DECODEEN_SECOND_RES);
>  		break;
> +	default:
> +		break;
>  	}
>  }
>  
> @@ -318,6 +320,87 @@ static int sp5100_tco_timer_init(struct sp5100_tco *tco)
>  	return 0;
>  }
>  
> +static u8 efch_read_pm_reg8(void __iomem *addr, u8 index)
> +{
> +	return readb(addr + index);
> +}
> +
> +static void efch_update_pm_reg8(void __iomem *addr, u8 index, u8 reset, u8 set)
> +{
> +	u8 val;
> +
> +	val = readb(addr + index);
> +	val &= reset;
> +	val |= set;
> +	writeb(val, addr + index);
> +}
> +
> +static void tco_timer_enable_mmio(void __iomem *addr)
> +{
> +	efch_update_pm_reg8(addr, EFCH_PM_DECODEEN3,
> +			    ~EFCH_PM_WATCHDOG_DISABLE,
> +			    EFCH_PM_DECODEEN_SECOND_RES);
> +}
> +
> +static int sp5100_tco_setupdevice_mmio(struct device *dev,
> +				       struct watchdog_device *wdd)
> +{
> +	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
> +	const char *dev_name = SB800_DEVNAME;
> +	u32 mmio_addr = 0, alt_mmio_addr = 0;
> +	struct resource *res;
> +	void __iomem *addr;
> +	int ret;
> +
> +	res = request_mem_region(EFCH_PM_ACPI_MMIO_PM_ADDR,
> +				 EFCH_PM_ACPI_MMIO_PM_SIZE,
> +				 "sp5100_tco");
> +
> +	if (!res) {
> +		dev_err(dev,
> +			"SMB base address memory region 0x%x already in use.\n",

SMB -> SMBus

> +			EFCH_PM_ACPI_MMIO_PM_ADDR);
> +		return -EBUSY;
> +	}
> +
> +	addr = ioremap(EFCH_PM_ACPI_MMIO_PM_ADDR,
> +		       EFCH_PM_ACPI_MMIO_PM_SIZE);
> +	if (!addr) {
> +		release_resource(res);
> +		dev_err(dev, "SMB base address mapping failed.\n");

SMB -> SMBus

> +		return -ENOMEM;
> +	}
> +

A short comment saying what the next command is doing would be
appreciated.

> +	if (!(efch_read_pm_reg8(addr, EFCH_PM_DECODEEN) &
> +	      EFCH_PM_DECODEEN_WDT_TMREN)) {

I find such splits hard to read. If checkpatch complains when you don't
split it (but I think it no longer does, right?) then just introduce a
local variable to store the register value. Same for the 2 occurrences
below.

> +		efch_update_pm_reg8(addr, EFCH_PM_DECODEEN,
> +				    0xff,
> +				    EFCH_PM_DECODEEN_WDT_TMREN);

Easily fits in one fewer line.

> +	}
> +
> +	/* Determine MMIO base address */
> +	if (efch_read_pm_reg8(addr, EFCH_PM_DECODEEN) &
> +	    EFCH_PM_DECODEEN_WDT_TMREN)
> +		mmio_addr = EFCH_PM_WDT_ADDR;
> +
> +	/* Determine alternate MMIO base address */
> +	if (efch_read_pm_reg8(addr, EFCH_PM_ISACONTROL) &
> +	    EFCH_PM_ISACONTROL_MMIOEN)
> +		alt_mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
> +			EFCH_PM_ACPI_MMIO_WDT_OFFSET;
> +
> +	ret = sp5100_tco_prepare_base(tco, mmio_addr, alt_mmio_addr, dev_name);
> +	if (!ret) {
> +		tco_timer_enable_mmio(addr);
> +		ret = sp5100_tco_timer_init(tco);
> +	}
> +
> +	iounmap(addr);
> +	release_resource(res);
> +
> +	return ret;
> +}
> +
>  static int sp5100_tco_setupdevice(struct device *dev,
>  				  struct watchdog_device *wdd)
>  {
> @@ -327,6 +410,9 @@ static int sp5100_tco_setupdevice(struct device *dev,
>  	u32 alt_mmio_addr = 0;
>  	int ret;
>  
> +	if (tco->tco_reg_layout == efch_mmio)
> +		return sp5100_tco_setupdevice_mmio(dev, wdd);
> +
>  	/* Request the IO ports used by this driver */
>  	if (!request_muxed_region(SP5100_IO_PM_INDEX_REG,
>  				  SP5100_PM_IOPORTS_SIZE, "sp5100_tco")) {
> diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
> index adf015aa4126..2df8f8b2c55b 100644
> --- a/drivers/watchdog/sp5100_tco.h
> +++ b/drivers/watchdog/sp5100_tco.h
> @@ -83,3 +83,8 @@
>  
>  #define EFCH_PM_ACPI_MMIO_ADDR		0xfed80000
>  #define EFCH_PM_ACPI_MMIO_WDT_OFFSET	0x00000b00
> +#define EFCH_PM_ACPI_MMIO_PM_OFFSET	0x00000300
> +
> +#define EFCH_PM_ACPI_MMIO_PM_ADDR	(EFCH_PM_ACPI_MMIO_ADDR +	\
> +					 EFCH_PM_ACPI_MMIO_PM_OFFSET)
> +#define EFCH_PM_ACPI_MMIO_PM_SIZE       8

Other than these minor details, patch looks good to me, thanks.

Tested-by: Jean Delvare <jdelvare@xxxxxxx>

-- 
Jean Delvare
SUSE L3 Support