[PATCH 5.16 0045/1039] media: flexcop-usb: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@xxxxxxxxxx>

commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Note that the driver was multiplying some of the timeout values with HZ
twice resulting in 3000-second timeouts with HZ=1000.

Also note that two of the timeout defines are currently unused.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@xxxxxxxxxxxxxxx      # 3.0
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/media/usb/b2c2/flexcop-usb.c |   10 +++++-----
 drivers/media/usb/b2c2/flexcop-usb.h |   12 ++++++------
 2 files changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -87,7 +87,7 @@ static int flexcop_usb_readwrite_dw(stru
 			0,
 			fc_usb->data,
 			sizeof(u32),
-			B2C2_WAIT_FOR_OPERATION_RDW * HZ);
+			B2C2_WAIT_FOR_OPERATION_RDW);
 
 	if (ret != sizeof(u32)) {
 		err("error while %s dword from %d (%d).", read ? "reading" :
@@ -155,7 +155,7 @@ static int flexcop_usb_v8_memory_req(str
 			wIndex,
 			fc_usb->data,
 			buflen,
-			nWaitTime * HZ);
+			nWaitTime);
 	if (ret != buflen)
 		ret = -EIO;
 
@@ -248,13 +248,13 @@ static int flexcop_usb_i2c_req(struct fl
 		/* DKT 020208 - add this to support special case of DiSEqC */
 	case USB_FUNC_I2C_CHECKWRITE:
 		pipe = B2C2_USB_CTRL_PIPE_OUT;
-		nWaitTime = 2;
+		nWaitTime = 2000;
 		request_type |= USB_DIR_OUT;
 		break;
 	case USB_FUNC_I2C_READ:
 	case USB_FUNC_I2C_REPEATREAD:
 		pipe = B2C2_USB_CTRL_PIPE_IN;
-		nWaitTime = 2;
+		nWaitTime = 2000;
 		request_type |= USB_DIR_IN;
 		break;
 	default:
@@ -281,7 +281,7 @@ static int flexcop_usb_i2c_req(struct fl
 			wIndex,
 			fc_usb->data,
 			buflen,
-			nWaitTime * HZ);
+			nWaitTime);
 
 	if (ret != buflen)
 		ret = -EIO;
--- a/drivers/media/usb/b2c2/flexcop-usb.h
+++ b/drivers/media/usb/b2c2/flexcop-usb.h
@@ -91,13 +91,13 @@ typedef enum {
 	UTILITY_SRAM_TESTVERIFY     = 0x16,
 } flexcop_usb_utility_function_t;
 
-#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
-#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
+#define B2C2_WAIT_FOR_OPERATION_RW 1000
+#define B2C2_WAIT_FOR_OPERATION_RDW 3000
+#define B2C2_WAIT_FOR_OPERATION_WDW 1000
 
-#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8READ 3000
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3000
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3000
 
 typedef enum {
 	V8_MEMORY_PAGE_DVB_CI = 0x20,