Re: [PATCH v2 1/2] soc: mediatek: pwrap: add pwrap driver for MT8186 SoC

[Johnson Wang]

Hi Matthias,

On Tue, 2022-01-18 at 14:17 +0100, Matthias Brugger wrote:
> 
> On 18/01/2022 10:25, Johnson Wang wrote:
> > Hi Matthias,
> > 
> > On Fri, 2022-01-14 at 16:46 +0100, Matthias Brugger wrote:
> > > 
> > > On 07/01/2022 11:46, Johnson Wang wrote:
> > > > MT8186 are highly integrated SoC and use PMIC_MT6366 for
> > > > power management. This patch adds pwrap master driver to
> > > > access PMIC_MT6366.
> > > > 
> > > 
> > > It seems this new arbiter is significantly different from the
> > > version
> > > 1. Please
> > > explain that in the commit message.
> > > 
> > > > Signed-off-by: Johnson Wang <johnson.wang@xxxxxxxxxxxx>
> > > > ---
> > > >    drivers/soc/mediatek/mtk-pmic-wrap.c | 72
> > > > ++++++++++++++++++++++++++++
> > > >    1 file changed, 72 insertions(+)
> > > > 
> > > > diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c
> > > > b/drivers/soc/mediatek/mtk-pmic-wrap.c
> > > > index 952bc554f443..78866ebf7f04 100644
> > > > --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
> > > > +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
> > > > @@ -30,6 +30,7 @@
> > > >    #define PWRAP_GET_WACS_REQ(x)		(((x) >> 19) &
> > > > 0x00000001)
> > > >    #define PWRAP_STATE_SYNC_IDLE0		BIT(20)
> > > >    #define PWRAP_STATE_INIT_DONE0		BIT(21)
> > > > +#define PWRAP_STATE_INIT_DONE0_V2	BIT(22)
> > > 
> > > That's a strange name, does it come from the datasheet
> > > description?
> > 
> > Thanks for your review.
> > 
> > No, there is only PWRAP_STATE_INIT_DONE0 in MT8186 datasheet.
> > However, it's the 22nd bit in MT8186 and the 21st bit in other
> > SoCs.
> > So we changed its name to avoid redefinition of
> > PWRAP_STATE_INIT_DONE0.
> > 
> > Could you give us some suggestion on proper definition naming?
> > Do you think PWRAP_STATE_INIT_DONE0_MT8186 will be a better choice?
> > 
> 
> Is this a difference that only will show up on the PMIC-wrapper of
> MT8186 or 
> will other SoCs include the same IP? If not, then
> PWRAP_STATE_INIT_DONE0_MT8186 
> should be fine. Otherwise we would need a better name.
> 

In fact, we don't know whether following SoCs will include
the same IP in the future.

Can we just replace _V2 with _MT8186 this time or
please give us some suggestion on it. 

Thanks for your response.

> > > 
> > > >    #define PWRAP_STATE_INIT_DONE1		BIT(15)
> > > >    
> > > >    /* macro for WACS FSM */
> > > > @@ -77,6 +78,8 @@
> > > >    #define PWRAP_CAP_INT1_EN	BIT(3)
> > > >    #define PWRAP_CAP_WDT_SRC1	BIT(4)
> > > >    #define PWRAP_CAP_ARB		BIT(5)
> > > > +#define PWRAP_CAP_MONITOR_V2	BIT(6)
> > > 
> > > Not used capability, please delete.
> > > 
> > > 
> > > Regards,
> > > Matthias
> > 
> > PWRAP_CAP_MONITOR_V2 is not used right now.
> > We can remove it in next version.
> > But this capability will be added when we need it.
> > 
> 
> That's OK, we should add capability definitions once they are added
> to the 
> driver, not before that.
> 
> Thanks,
> Matthias