Re: [PATCH v3 8/8] arm64: dts: ls1028a-qds: add overlays for various serdes protocols

From: Shawn Guo
Date: Wed Jan 26 2022 - 03:34:01 EST

Next message: Ard Biesheuvel: "Re: [PATCH v3] arm64/mm: avoid fixmap race condition when create pud mapping"
Previous message: Yuri Benditovich: "Re: [RFC PATCH 0/5] TUN/VirtioNet USO features support."
Next in thread: Leo Li: "RE: [PATCH v3 8/8] arm64: dts: ls1028a-qds: add overlays for various serdes protocols"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Leo,

On Tue, Dec 14, 2021 at 03:32:40AM -0600, Li Yang wrote:
> From: Alex Marginean <alexandru.marginean@xxxxxxx>
>
> Add overlays for various serdes protocols on LS1028A QDS board using
> different PHY cards. These should be applied at boot, based on serdes
> configuration. If no overlay is applied, only the RGMII interface on
> the QDS is available in Linux.
>
> Building device tree fragments requires passing the "-@" argument to
> dtc, which increases the base dtb size and might cause some platforms to
> fail to store the new binary. To avoid that, it would be nice to only
> pass "-@" for the platforms where fragments will be used, aka
> LS1028A-QDS. One approach suggested by Rob Herring is used here:
>
> https://lore.kernel.org/patchwork/patch/821645/
>
> Also moved the enet* override nodes in dts file to be in alphabetic order.
>
> Signed-off-by: Alex Marginean <alexandru.marginean@xxxxxxx>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
> Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx>
> Signed-off-by: Jason Liu <jason.hui.liu@xxxxxxx>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
> Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 16 +++
> .../dts/freescale/fsl-ls1028a-qds-13bb.dts | 113 ++++++++++++++++++
> .../dts/freescale/fsl-ls1028a-qds-65bb.dts | 108 +++++++++++++++++
> .../dts/freescale/fsl-ls1028a-qds-7777.dts | 82 +++++++++++++
> .../dts/freescale/fsl-ls1028a-qds-85bb.dts | 107 +++++++++++++++++
> .../dts/freescale/fsl-ls1028a-qds-899b.dts | 75 ++++++++++++
> .../dts/freescale/fsl-ls1028a-qds-9999.dts | 79 ++++++++++++
> .../boot/dts/freescale/fsl-ls1028a-qds.dts | 19 ++-
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
> 9 files changed, 595 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index a14a6173b765..f518eb1e1142 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -1,4 +1,14 @@
> # SPDX-License-Identifier: GPL-2.0
> +
> +# required for overlay support
> +DTC_FLAGS_fsl-ls1028a-qds := -@
> +DTC_FLAGS_fsl-ls1028a-qds-13bb := -@
> +DTC_FLAGS_fsl-ls1028a-qds-65bb := -@
> +DTC_FLAGS_fsl-ls1028a-qds-7777 := -@
> +DTC_FLAGS_fsl-ls1028a-qds-85bb := -@
> +DTC_FLAGS_fsl-ls1028a-qds-899b := -@
> +DTC_FLAGS_fsl-ls1028a-qds-9999 := -@
> +
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
> @@ -11,6 +21,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
> new file mode 100644
> index 000000000000..f748a2c12a70
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
> @@ -0,0 +1,113 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree fragment for LS1028A QDS board, serdes 13bb
> + *
> + * Copyright 2019-2021 NXP
> + *
> + * Requires a LS1028A QDS board with lane B rework.
> + * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
> + * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target = <&mdio_slot1>;

I cannot find this mdio_slot1 node (and mdio_slot2 below) in any upstream
device tree. We are not going to maintain a bunch of overlays which are
only meant to apply on the out-of-tree DTs.

So please either submit those missing device nodes in the base DT, or I
will have to revert the patch.

Shawn

> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + slot1_sgmii: ethernet-phy@2 {
> + /* AQR112 */
> + reg = <0x2>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> + };
> + };
> +
> + fragment@1 {
> + target = <&enetc_port0>;
> +
> + __overlay__ {
> + phy-handle = <&slot1_sgmii>;
> + phy-mode = "usxgmii";
> + managed = "in-band-status";
> + status = "okay";
> + };
> + };
> +
> + fragment@2 {
> + target = <&mdio_slot2>;
> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* 4 ports on AQR412 */
> + slot2_qxgmii0: ethernet-phy@0 {
> + reg = <0x0>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> +
> + slot2_qxgmii1: ethernet-phy@1 {
> + reg = <0x1>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> +
> + slot2_qxgmii2: ethernet-phy@2 {
> + reg = <0x2>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> +
> + slot2_qxgmii3: ethernet-phy@3 {
> + reg = <0x3>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> + };
> + };
> +
> + fragment@3 {
> + target = <&mscc_felix_ports>;
> +
> + __overlay__ {
> + port@0 {
> + status = "okay";
> + phy-handle = <&slot2_qxgmii0>;
> + phy-mode = "usxgmii";
> + managed = "in-band-status";
> + };
> +
> + port@1 {
> + status = "okay";
> + phy-handle = <&slot2_qxgmii1>;
> + phy-mode = "usxgmii";
> + managed = "in-band-status";
> + };
> +
> + port@2 {
> + status = "okay";
> + phy-handle = <&slot2_qxgmii2>;
> + phy-mode = "usxgmii";
> + managed = "in-band-status";
> + };
> +
> + port@3 {
> + status = "okay";
> + phy-handle = <&slot2_qxgmii3>;
> + phy-mode = "usxgmii";
> + managed = "in-band-status";
> + };
> + };
> + };
> +
> + fragment@4 {
> + target = <&mscc_felix>;
> +
> + __overlay__ {
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
> new file mode 100644
> index 000000000000..8ffb707a1576
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
> @@ -0,0 +1,108 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree fragment for LS1028A QDS board, serdes 69xx
> + *
> + * Copyright 2019-2021 NXP
> + *
> + * Requires a LS1028A QDS board with lane B rework.
> + * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target = <&mdio_slot1>;
> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + slot1_sgmii: ethernet-phy@2 {
> + /* AQR112 */
> + reg = <0x2>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> + };
> + };
> +
> + fragment@1 {
> + target = <&enetc_port0>;
> +
> + __overlay__ {
> + phy-handle = <&slot1_sgmii>;
> + phy-mode = "2500base-x";
> + managed = "in-band-status";
> + status = "okay";
> + };
> + };
> +
> + fragment@2 {
> + target = <&mdio_slot2>;
> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* 4 ports on VSC8514 */
> + slot2_qsgmii0: ethernet-phy@8 {
> + reg = <0x8>;
> + };
> +
> + slot2_qsgmii1: ethernet-phy@9 {
> + reg = <0x9>;
> + };
> +
> + slot2_qsgmii2: ethernet-phy@a {
> + reg = <0xa>;
> + };
> +
> + slot2_qsgmii3: ethernet-phy@b {
> + reg = <0xb>;
> + };
> + };
> + };
> +
> + fragment@3 {
> + target = <&mscc_felix_ports>;
> +
> + __overlay__ {
> + port@0 {
> + status = "okay";
> + phy-handle = <&slot2_qsgmii0>;
> + phy-mode = "qsgmii";
> + managed = "in-band-status";
> + };
> +
> + port@1 {
> + status = "okay";
> + phy-handle = <&slot2_qsgmii1>;
> + phy-mode = "qsgmii";
> + managed = "in-band-status";
> + };
> +
> + port@2 {
> + status = "okay";
> + phy-handle = <&slot2_qsgmii2>;
> + phy-mode = "qsgmii";
> + managed = "in-band-status";
> + };
> +
> + port@3 {
> + status = "okay";
> + phy-handle = <&slot2_qsgmii3>;
> + phy-mode = "qsgmii";
> + managed = "in-band-status";
> + };
> + };
> + };
> +
> + fragment@4 {
> + target = <&mscc_felix>;
> +
> + __overlay__ {
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
> new file mode 100644
> index 000000000000..eb6a1e674f10
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
> @@ -0,0 +1,82 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree fragment for LS1028A QDS board, serdes 7777
> + *
> + * Copyright 2019-2021 NXP
> + *
> + * Requires a LS1028A QDS board without lane B rework.
> + * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
> + * disabled, plugged in slot 1.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target = <&mdio_slot1>;
> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* 4 ports on AQR412 */
> + slot1_sxgmii0: ethernet-phy@0 {
> + reg = <0x0>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> +
> + slot1_sxgmii1: ethernet-phy@1 {
> + reg = <0x1>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> +
> + slot1_sxgmii2: ethernet-phy@2 {
> + reg = <0x2>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> +
> + slot1_sxgmii3: ethernet-phy@3 {
> + reg = <0x3>;
> + compatible = "ethernet-phy-ieee802.3-c45";
> + };
> + };
> + };
> +
> + fragment@1 {
> + target = <&mscc_felix_ports>;
> +
> + __overlay__ {
> + port@0 {
> + status = "okay";
> + phy-handle = <&slot1_sxgmii0>;
> + phy-mode = "2500base-x";
> + };
> +
> + port@1 {
> + status = "okay";
> + phy-handle = <&slot1_sxgmii1>;
> + phy-mode = "2500base-x";
> + };
> +
> + port@2 {
> + status = "okay";
> + phy-handle = <&slot1_sxgmii2>;
> + phy-mode = "2500base-x";
> + };
> +
> + port@3 {
> + status = "okay";
> + phy-handle = <&slot1_sxgmii3>;
> + phy-mode = "2500base-x";
> + };
> + };
> + };
> +
> + fragment@2 {
> + target = <&mscc_felix>;
> + __overlay__ {
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
> new file mode 100644
> index 000000000000..8e90c3088ba1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
> @@ -0,0 +1,107 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree fragment for LS1028A QDS board, serdes 85bb
> + *
> + * Copyright 2019-2021 NXP
> + *
> + * Requires a LS1028A QDS board with lane B rework.
> + * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target = <&mdio_slot1>;
> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + slot1_sgmii: ethernet-phy@1c {
> + /* 1st port on VSC8234 */
> + reg = <0x1c>;
> + };
> + };
> + };
> +
> + fragment@1 {
> + target = <&enetc_port0>;
> +
> + __overlay__ {
> + phy-handle = <&slot1_sgmii>;
> + phy-mode = "sgmii";
> + managed = "in-band-status";
> + status = "okay";
> + };
> + };
> +
> + fragment@2 {
> + target = <&mdio_slot2>;
> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* 4 ports on VSC8514 */
> + slot2_qsgmii0: ethernet-phy@8 {
> + reg = <0x8>;
> + };
> +
> + slot2_qsgmii1: ethernet-phy@9 {
> + reg = <0x9>;
> + };
> +
> + slot2_qsgmii2: ethernet-phy@a {
> + reg = <0xa>;
> + };
> +
> + slot2_qsgmii3: ethernet-phy@b {
> + reg = <0xb>;
> + };
> + };
> + };
> +
> + fragment@3 {
> + target = <&mscc_felix_ports>;
> +
> + __overlay__ {
> + port@0 {
> + status = "okay";
> + phy-handle = <&slot2_qsgmii0>;
> + phy-mode = "qsgmii";
> + managed = "in-band-status";
> + };
> +
> + port@1 {
> + status = "okay";
> + phy-handle = <&slot2_qsgmii1>;
> + phy-mode = "qsgmii";
> + managed = "in-band-status";
> + };
> +
> + port@2 {
> + status = "okay";
> + phy-handle = <&slot2_qsgmii2>;
> + phy-mode = "qsgmii";
> + managed = "in-band-status";
> + };
> +
> + port@3 {
> + status = "okay";
> + phy-handle = <&slot2_qsgmii3>;
> + phy-mode = "qsgmii";
> + managed = "in-band-status";
> + };
> + };
> + };
> +
> + fragment@4 {
> + target = <&mscc_felix>;
> +
> + __overlay__ {
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
> new file mode 100644
> index 000000000000..5d0a094e6c44
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree fragment for LS1028A QDS board, serdes 85xx
> + *
> + * Copyright 2019-2021 NXP
> + *
> + * Requires a LS1028A QDS board without lane B rework.
> + * Requires a SCH-24801 card in slot 1.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target = <&mdio_slot1>;
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* VSC8234 */
> + slot1_sgmii0: ethernet-phy@1c {
> + reg = <0x1c>;
> + };
> +
> + slot1_sgmii1: ethernet-phy@1d {
> + reg = <0x1d>;
> + };
> +
> + slot1_sgmii2: ethernet-phy@1e {
> + reg = <0x1e>;
> + };
> +
> + slot1_sgmii3: ethernet-phy@1f {
> + reg = <0x1f>;
> + };
> + };
> + };
> +
> + fragment@1 {
> + target = <&enetc_port0>;
> + __overlay__ {
> + phy-handle = <&slot1_sgmii0>;
> + phy-mode = "sgmii";
> + managed = "in-band-status";
> + status = "okay";
> + };
> + };
> +
> + fragment@2 {
> + target = <&mscc_felix_ports>;
> + __overlay__ {
> + port@1 {
> + status = "okay";
> + phy-handle = <&slot1_sgmii1>;
> + phy-mode = "sgmii";
> + managed = "in-band-status";
> + };
> +
> + port@2 {
> + status = "okay";
> + phy-handle = <&slot1_sgmii2>;
> + phy-mode = "sgmii";
> + managed = "in-band-status";
> + };
> + };
> + };
> +
> + fragment@3 {
> + target = <&mscc_felix>;
> + __overlay__ {
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
> new file mode 100644
> index 000000000000..1ef743c48e84
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree fragment for LS1028A QDS board, serdes 85xx
> + *
> + * Copyright 2019-2021 NXP
> + *
> + * Requires a LS1028A QDS board without lane B rework.
> + * Requires a SCH-24801 card in slot 1.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target = <&mdio_slot1>;
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* VSC8234 */
> + slot1_sgmii0: ethernet-phy@1c {
> + reg = <0x1c>;
> + };
> +
> + slot1_sgmii1: ethernet-phy@1d {
> + reg = <0x1d>;
> + };
> +
> + slot1_sgmii2: ethernet-phy@1e {
> + reg = <0x1e>;
> + };
> +
> + slot1_sgmii3: ethernet-phy@1f {
> + reg = <0x1f>;
> + };
> + };
> + };
> +
> + fragment@1 {
> + target = <&mscc_felix_ports>;
> + __overlay__ {
> + port@0 {
> + status = "okay";
> + phy-handle = <&slot1_sgmii0>;
> + phy-mode = "sgmii";
> + managed = "in-band-status";
> + };
> +
> + port@1 {
> + status = "okay";
> + phy-handle = <&slot1_sgmii1>;
> + phy-mode = "sgmii";
> + managed = "in-band-status";
> + };
> +
> + port@2 {
> + status = "okay";
> + phy-handle = <&slot1_sgmii2>;
> + phy-mode = "sgmii";
> + managed = "in-band-status";
> + };
> +
> + port@3 {
> + status = "okay";
> + phy-handle = <&slot1_sgmii3>;
> + phy-mode = "sgmii";
> + managed = "in-band-status";
> + };
> + };
> + };
> +
> + fragment@2 {
> + target = <&mscc_felix>;
> + __overlay__ {
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 782853a449cc..177bc1405f0f 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -211,6 +211,16 @@ &duart1 {
> status = "okay";
> };
>
> +&enetc_port1 {
> + phy-handle = <&qds_phy1>;
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> +&enetc_port2 {
> + status = "okay";
> +};
> +
> &esdhc {
> status = "okay";
> };
> @@ -326,17 +336,16 @@ rtc@51 {
> };
> };
>
> -&enetc_port1 {
> - phy-handle = <&qds_phy1>;
> - phy-mode = "rgmii-id";
> +&lpuart0 {
> status = "okay";
> };
>
> -&lpuart0 {
> +&lpuart1 {
> status = "okay";
> };
>
> -&lpuart1 {
> +&mscc_felix_port4 {
> + ethernet = <&enetc_port2>;
> status = "okay";
> };
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 5a7b26a1bad2..5bb8c26e0825 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -1115,7 +1115,7 @@ mscc_felix: ethernet-switch@0,5 {
> interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
>
> - ports {
> + mscc_felix_ports: ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> --
> 2.25.1
>

Next message: Ard Biesheuvel: "Re: [PATCH v3] arm64/mm: avoid fixmap race condition when create pud mapping"
Previous message: Yuri Benditovich: "Re: [RFC PATCH 0/5] TUN/VirtioNet USO features support."
Next in thread: Leo Li: "RE: [PATCH v3 8/8] arm64: dts: ls1028a-qds: add overlays for various serdes protocols"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]