Re: [PATCH v2] drm/bridge: Add missing pm_runtime_put_sync

[Laurent Pinchart]

Hi Yongzhi,

Thank you for the patch.

On Sun, Jan 23, 2022 at 11:20:35PM -0800, Yongzhi Liu wrote:
> pm_runtime_get_sync() will increase the rumtime PM counter
> even when it returns an error. Thus a pairing decrement is needed
> to prevent refcount leak. Fix this by replacing this API with
> pm_runtime_resume_and_get(), which will not change the runtime
> PM counter on error. Besides, a matching decrement is needed
> on the error handling path to keep the counter balanced.
> 
> Signed-off-by: Yongzhi Liu <lyz_cs@xxxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/bridge/nwl-dsi.c | 18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
> index 9282e61..30aacd9 100644
> --- a/drivers/gpu/drm/bridge/nwl-dsi.c
> +++ b/drivers/gpu/drm/bridge/nwl-dsi.c
> @@ -862,18 +862,19 @@ nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,
>  	memcpy(&dsi->mode, adjusted_mode, sizeof(dsi->mode));
>  	drm_mode_debug_printmodeline(adjusted_mode);
>  
> -	pm_runtime_get_sync(dev);
> +	if (pm_runtime_resume_and_get(dev) < 0)
> +		return;
>  
>  	if (clk_prepare_enable(dsi->lcdif_clk) < 0)
> -		return;
> +		goto runtime_put;
>  	if (clk_prepare_enable(dsi->core_clk) < 0)
> -		return;
> +		goto runtime_put;
>  
>  	/* Step 1 from DSI reset-out instructions */
>  	ret = reset_control_deassert(dsi->rst_pclk);
>  	if (ret < 0) {
>  		DRM_DEV_ERROR(dev, "Failed to deassert PCLK: %d\n", ret);
> -		return;
> +		goto runtime_put;
>  	}
>  
>  	/* Step 2 from DSI reset-out instructions */
> @@ -883,13 +884,18 @@ nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,
>  	ret = reset_control_deassert(dsi->rst_esc);
>  	if (ret < 0) {
>  		DRM_DEV_ERROR(dev, "Failed to deassert ESC: %d\n", ret);
> -		return;
> +		goto runtime_put;
>  	}
>  	ret = reset_control_deassert(dsi->rst_byte);
>  	if (ret < 0) {
>  		DRM_DEV_ERROR(dev, "Failed to deassert BYTE: %d\n", ret);
> -		return;
> +		goto runtime_put;
>  	}
> +
> +	return;
> +
> +runtime_put:
> +	pm_runtime_put_sync(dev);
>  }
>  
>  static void

-- 
Regards,

Laurent Pinchart