Re: [PATCH] arm64: dts: mt8195: add gce node

From: AngeloGioacchino Del Regno
Date: Thu Jan 27 2022 - 05:24:50 EST


Il 26/01/22 10:01, jason-jh.lin ha scritto:
Add gce node and gce alias on mt8195 dts file.

Signed-off-by: jason-jh.lin <jason-jh.lin@xxxxxxxxxxxx>
---
This patch is based on [1]

[1] arm64: dts: Add mediatek SoC mt8195 and evaluation board
- https://patchwork.kernel.org/project/linux-mediatek/patch/20220112114724.1953-4-tinghan.shen@xxxxxxxxxxxx/
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index a363e82f6988..d778ca598d18 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/clock/mt8195-clk.h>
+#include <dt-bindings/gce/mt8195-gce.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
@@ -18,6 +19,11 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ gce0 = &gce0;
+ gce1 = &gce1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -367,6 +373,22 @@
assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
};
+ gce0: mdp_mailbox@10320000 {

Just "mailbox" is fine.
gce0: mailbox@10320000 {

+ compatible = "mediatek,mt8195-gce";
+ reg = <0 0x10320000 0 0x4000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <2>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+ };
+
+ gce1: disp_mailbox@10330000 {

Same here, please.

After that,
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

+ compatible = "mediatek,mt8195-gce";
+ reg = <0 0x10330000 0 0x4000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <2>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
+ };
+
scp_adsp: clock-controller@10720000 {
compatible = "mediatek,mt8195-scp_adsp";
reg = <0 0x10720000 0 0x1000>;